Smart-AVI EDID-Mirror-1P User manual

Type
User manual
Learn and Emulate the EDID
of a DVI-D display
EDID-Mirror-1P
1-Port DVI-D EDID Emulator
www.smartavi.com
Installation
Manual
Technical Specications
What’s in the Box?
PART NO. QTY DESCRIPTION
EDID-Mirror-1P 1 1-Port DVI-D EDID Emulator
Power Supply 1 PS5VDC2A
OTHER
DDC Signal 5 Volts [peak-to-peak], TTL
TDMS Signal 1.2 Volts[peak-to-peak], TTL
Power External 5VDC2A @ 10W
Dimensions 3.25”W x 1.75”H x 2.175”D
Weight 0.2 lbs.
Approvals Device: CE, ROHS
Power Supply: C-UL US, CE
© Copyright 2012 SmartAVI, All Rights Reserved
NOTICE
The information contained in this document
is subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular purpose.
Smart-AVI will not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced or
translated into another language without prior written consent
from Smart-AVI.
For more information, visit www.smartavi.com.
SmartAVI, Inc. / Twitter: smartavi
11651 Vanowen St. North Hollywood, CA 91605
Tel: (818) 503-6200 Fax: (818) 503-6208
http://www.SmartAVI.com
Rack Mountable Option
Our SmartRack is the perfect solution to allow
virtually all SmartAVI devices to be custom mounted
in a standard 19” server rack. The SmartRack is fully
adjustable and can secure/organize several devices.
DVI-D VIDEO
Format DVI-D Single Line
Maximum Pixel Clock 165 MHz
Input Interface (1) DVI-D 29-pin female
Output Interface (1) DVI-D 29-pin female
Resolution Up to 1920 x 1200 @60Hz
DDC 5 volts p-p(TTL)
Input Equalization Automatic
Input Cable Length Up to 10 ft.
Output Cable Length Up to 10 ft.
Introduction
Eliminate the Headache of Display Conguration and
Auto-detection with SmartAVI’s EDID-Mirror. The EDID-
Mirror prevents Windows7, XP and Linux from auto-
conguring your displays if your computer is started up
with the displays disconnected or turned o. Certain
operating systems, especially Windows 7, have a display
auto-detection feature that can recongure your displays
if they are not powered on or connected at startup. This
can lead to the frustrating task of reconguring your
displays. The solution is the EDID-Mirror, a DVI-D EDID
(Extended Display Identication Data) emulator that
provides a constant signal to the computer, regardless of
whether the displays are present or not. This ensures that
the display conguration is not lost.
Learning the EDID
1. Disconnect the EDID-Mirror-1P from the computer.
2. Power on the EDID-Mirror-1P by plugging it in.
3. Press the LEARN button three times; wait for both
activity lights ash on & o.
4. Connect the EDID-Mirror-1P to the display.
5. Power on the Display.
6. Congure your display as desired.
7. The activity lights on the EDID-Mirror-1P will be
steadily illuminated.
8. Press and hold LEARN button until both activity
lights turn o (aprox. 2 seconds)
9. Release the learn button
10. Acitivity lights will blink slowly while EDID is
learning.
11. When the learning is completed, both activity
lights will quickly blink alternately indicating that
the EDID has been learned. (If the learning fails,
the activity lights will turn o for approximately 2
seconds)
12. Disconnect display and repeat steps 1-11 once
more to nalize learning.
13. Plug in and power up the display
14. Connect the EDID-Mirror-1P to the computer.
15. It is now safe to disconnect the DVI-D cable from
the display without losing your conguration.
16. The EDID information is stored even if the EDID-
Mirror-1P is powered o.
Features
• Learns the EDID conguration
• Stores EDID conguration in non-volatile memory so
that the unit may be powered o and the congura-
tion will not be lost
• Display can be disconnected as needed without los-
ing EDID conguration
• Uses standard EDID conguration standards
• Compatible with most DVI-D displays and all Win-
dows versions
1
Display
1
1
IN OUT
1
EDID-Mirror-1P
Computer
Installation Diagram
Technical Specifications
Input/Output Signal
#niPlangiS#ni
Pl
angiS
1-2ataDS.D.M
.6
T1tceteDgulPtoH
2+2ataDS.D.M
.7
T1-0ataDS.D.M.T
d3leihS4/2ataDS.D.M
.8
T1+0ataDS.D.M.T
4-4ataDS.D.M. 9
Td1l
eihS5/0ataDS.D.M.T
5+4ataDS.D.M
.0
T2-5ataDS.D.M.T
6kcolCCD1D2+5ataDS.D.M.T
7ataDCD2
Dd2l
eihSkcolCS.D.M.T
8cnyS.treVgolan 3A
2+
kcolCS.D.M.T
9-1ataDS.D.M
.4
T2-kcolCS.D.M.T
01+1ataDS.D.M.T
1d1leihS3/1ataDS.D.M
.1
TCdeRgolanA
21-3ataDS.D.M
.2
T
Cn
eerGgolanA
31+3ataDS.D.M
.3
TCeulBgolanA
41rewoPV54+CcnySzroHgolanA
51DN 5GCdnuorGgolanA
PIN 17
PIN 1
PIN 24
PIN 8
C 4
C 1
C 2
C 5
C 3
esolutions
Suppote the intenal I configuation
zH 58084 x 046
zH 58006 x 008
zH 58867 x 4201
zH 57078 x 2511
zH 57867 x 0821
zH 06069 x 0821
zH 064201 x 0821
zH 060021 x 0061
Resolution Refresh Rate
5C 16
EDID provides plug-and-play capability to your
displays. When you plug a display into your
computer, the EDID table in the display tells the
computer the optimal resolution to use.
ABOUT EDID
Technical Specifications
Input/Output Signal
#niPlangiS#niPlangiS
1-2ataDS.D.M.6T1tceteDgulPtoH
2+2ataDS.D.M.7T1-0ataDS.D.M.T
d3leihS4/2ataDS.D.M.8T1+0ataDS.D.M.T
4-4ataDS.D.M. 9Td1leihS5/0ataDS.D.M.T
5+4ataDS.D.M.0T2-5ataDS.D.M.T
6kcolCCD1D2+5ataDS.D.M.T
7ataDCD2Dd2leihSkcolCS.D.M.T
8cnyS.treVgolan 3A 2+kcolCS.D.M.T
9-1ataDS.D.M.4T2-kcolCS.D.M.T
01+1ataDS.D.M.T
1d1leihS3/1ataDS.D.M.1TCdeRgolanA
21-3ataDS.D.M.2T CneerGgolanA
31+3ataDS.D.M.3TCeulBgolanA
41rewoPV54+CcnySzroHgolanA
51DN 5GCdnuorGgolanA
PIN 17
PIN 1
PIN 24
PIN 8
C 4
C 1
C 2
C 5
C 3
esolutions
Suppote the intenal I configuation
zH 58084 x 046
zH 58006 x 008
zH 58867 x 4201
zH 57078 x 2511
zH 57867 x 0821
zH 06069 x 0821
zH 064201 x 0821
zH 060021 x 0061
Resolution Refresh Rate
5C 16
  • Page 1 1
  • Page 2 2

Smart-AVI EDID-Mirror-1P User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI