Assembly instructions for Adirondack Chair
Step 1.- Locate seating (1), backrest (1) arms (2) and hardware pack
(1) with carriage bolts with nuts and washers.
Step 2.- Position arms and backrest on seating aligning the pre-drilled
holes.
Step 3.- Using the hardware pack secure together arms, backrest and
seating like the picture.
-
1
Best Redwood ADCHB-NS Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI