Riva RK19090-VCB is a valve cover block-off kit designed specifically for Kawasaki Ultra 250X/Ultra LX/STX-15F/STX-12F models. This kit allows you to remove the stock valve cover breather system and install block-off plates in its place. Here are some of the benefits of using this kit:
- Improved engine performance: By blocking off the valve cover breathers, you can prevent unfiltered air from entering the engine. This can lead to increased power and efficiency.
- Reduced oil consumption: The stock valve cover breather system can allow oil to escape from the engine. By blocking off the breathers, you can reduce oil consumption and keep your engine cleaner.
Riva RK19090-VCB is a valve cover block-off kit designed specifically for Kawasaki Ultra 250X/Ultra LX/STX-15F/STX-12F models. This kit allows you to remove the stock valve cover breather system and install block-off plates in its place. Here are some of the benefits of using this kit:
- Improved engine performance: By blocking off the valve cover breathers, you can prevent unfiltered air from entering the engine. This can lead to increased power and efficiency.
- Reduced oil consumption: The stock valve cover breather system can allow oil to escape from the engine. By blocking off the breathers, you can reduce oil consumption and keep your engine cleaner.
Word doc. RK19090 © H1 5/1/07 1
Valve Cover Block-off Kit
PART# - RK19090-VCB
APPLICATION(S): Kawasaki Ultra 250X/Ultra LX/STX-15F/STX-12F
- INSTALLATION INSTRUCTIONS -
1. On the valve cover remove the hose connected between the valve cover breathers. If utilizing the stock air intake
system installed the supplied vacuum cap onto the fitting on the air box and secure with the supplied zip tie.
2. Remove valve cover breather covers and discard.
3. Install supplied block-off plates and secure with OE bolts. (see illustration below) NOTE: Apply blue Loc-tite to
bolts. Do not over tighten bolts.
Remember, the water belongs to everyone. Please ride responsibly!
Technical Support
For answers to questions regarding installation or trouble shooting RIVA Performance Products contact:
RIVA Technical Support directly at (954) 247-0705 or by e-mail at [email protected].
Limited Warranty
RIVA Valve Cover Block-off’s carry a 1-year limited warranty to the original purchaser. They are warranted to be free of defects in materials and workmanship under normal
use and service. Customer modified components will be void of warranty. This warranty is limited to defects in the primary components only. Finish and/or wear marks in or
on primary components are not covered under this warranty.
RIVA Racing’s liability is expressly limited to the repair or replacement of the components contained within or associated with this kit. RIVA Racing agrees to repair or at
RIVA’s option, replace any defective unit without charge, if product is returned to RIVA Racing freight prepaid within the warranty period. Any equipment returned which, in
RIVA’s opinion, has been subjected to misuse, abuse, overheating or accident shall not be covered by this warranty.
RIVA Racing shall have no liability for special, incidental or consequential damages or injury to persons or property from any cause arising from the sale, installation or use
of this product.
No other warranty, express or implied, including, but not limited to the implied warranties of merchantability and fitness for a particular purpose, applies. Various states do
not allow for the limitation of incidental or consequential damages and therefore the above exclusion or limitation may not apply to you.
Warranty does not include the expenses related to freight or transportation of parts or compensation for any inconvenience or loss of use while being repaired. A copy of
the original invoice must accompany all warranty claims.
Warranted replacement parts will be returned freight collect.
Valve Cover Block-off’s installed.
-
1
Riva RK19090-VCB is a valve cover block-off kit designed specifically for Kawasaki Ultra 250X/Ultra LX/STX-15F/STX-12F models. This kit allows you to remove the stock valve cover breather system and install block-off plates in its place. Here are some of the benefits of using this kit:
- Improved engine performance: By blocking off the valve cover breathers, you can prevent unfiltered air from entering the engine. This can lead to increased power and efficiency.
- Reduced oil consumption: The stock valve cover breather system can allow oil to escape from the engine. By blocking off the breathers, you can reduce oil consumption and keep your engine cleaner.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Riva RS15090-ET Operating instructions
-
Riva RY5-VXR-MB Operating instructions
-
Riva RY5-FZ-MB Operating instructions
-
Riva RK13085 Operating instructions
-
Riva RS22090 Operating instructions
-
Riva RY15070 Operating instructions
-
Riva RS13140-2 Operating instructions
-
Riva RK18100-ERP Operating instructions
-
Riva RY17040-PC Operating instructions
-
Riva RS13121 Operating instructions
