Origami RSS-02 Operating instructions

Brand
Origami
Model
RSS-02
Type
Operating instructions

This manual is also suitable for

HOW TO INSTALL LEVELING FEET
3)
Repeat step 2 for the rest of the
three leveling feet.
2) Take a levelng feet and screw it into one of the
rack’s feet in a clockwise direction. Be sure to
screw all the way until it is tight.
Pull the side of shoe rack apart Keep pulling until fully extended Push the lock to secure in
postion
1)
Lay the shoe rack on the floor so that you
have access to the base of the rack.
Place the center shelf upright and
the slide in
Align the center shelf by placing it
on top of the hook at each corner.
HOW TO STACK THE RACK
3)
Repeat step 2 for the rest of the
three leveling feet.
3)
Pull the side of shoe rack apart
and push the lock to secure in
position.
2) Take a connection pin and screw it into one of
the rack’s feet in a clockwise direction. Be sure
to screw all the way until it is tight.
1)
Lay the second shoe rack on the floor so
that you have access to the base of the rack.
SHOE RACK INSTRUCTION
1 2 3 4
5 6 7 8
Weight Capacity without feet:
Weight Capacity with feet:
TOP and
BOTTOM SHELF
15 LB per shelf
15 LB per shelf 10 LB per shelf
10 LB per shelf
MIDDLE
SHELF
4)
Remove the caps from the base
rack.
5)
Lift the top rack up and align the
pins with the holes at the four top
corners so they can be inserted into
each other.
\Push the top shoe rack down firmly
so it fits tightly onto the bottom
shoe rack.
6)
Align the center shelf by placing
it on top of the hook at each corner.
WEIGHT CAPACITY
  • Page 1 1

Origami RSS-02 Operating instructions

Brand
Origami
Model
RSS-02
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents