Trademark Innovations ABTRAINER-BL User guide

REMOVE ALL PIECES FROM THE BOX:

2 posts with armrests

1 push bar

1 head frame

1 headrest

10 screws

8 washers

8 bolts

1 wrench

1 allen wrench

Using the tools included attach both posts with arm rests to each side of the head frame using 2 screws, 2 washers

and 2 bolts on each side.

ABTRAINER

Assembly Instructions

Tighten all screws and your

abtrainer is complete!

Attach the push bar to both posts with arm rests using

4 screws, 4 washers and 4 bolts.

Attach the headrest to the to the head frame

using 2 screws

STEP 5

STEP 3 STEP 4

WE VALUE OUR CUSTOMERS AND WANT TO BE SURE YOU ARE SATISFIED WITH YOUR PRODUCT.

IF YOU HAVE ANY QUESTIONS OR CONCERNS OR YOU ARE NOT COMPLETELY SATISFIED,

PLEASE CONTACT OUR OFFICE AT 1-800-906-1639.

Download PDF