Allied Brass P-230-24-TS-SN Installation guide

Type
Installation guide
Wall Flange
8x Wall Anchor
8x #12 Wood Screw
Step 1:
Determine your desired location for installation. Mark each wall flange screw location to be drilled. Drill hole at each of the
marks. Place anchors into the holes made. Then mount and secure unit into mounting surface using screws provided.
Drill holes in Wall for screw anchors and Mount with Screws provided.
INSTALLATION INSTRUCTIONS
No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.
P-230-TS
  • Page 1 1

Allied Brass P-230-24-TS-SN Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI