Operator'sManual
®
2700 PSi MAX
2.3 GPM MAX
Model No. 580.752280
PRESSUREWASHER
CUSTOMERHELPLINE
HOURS: Non. - Fri. 8 a.m. to 5 p.m. (CT)
WARHIHG
Before usingthis product, readthis
manualand follow all SafetyRules
and Operating Instructions.
ADVERTENCIA
Antes de utilizar el producto, lea este
manualy siga todas las Regiasde
Seguridade Instrucciones de Uso.
,, Safety
,,Assembly
,, Operation
,, Maintenance
,, Parts
,, Espafiol,p. 32
This pressure washer is rated in accordance to the PressureWasher Manufacture Association
(PWMA) standard PWl01 (Testing and Rating Performance of Pressure Washers).
Esta limpiadora a presi6n est_ clasificadaconforme a lanorma PWl01 (comprobaci6n y clasificaciOn de rendimiento de limpiadoras
a presiOn)de laAsociaci6n defabricantes de bombas a presiOn(Pressure Washer Manufacture Association, PWMA).
Sears, Roebuckand Co., HoffmanEstates,IL 60179 U.S.A.
Visit ourCraftsman website:www.craftsman.com
Part No. 206016GS Draft B (05/01/2008) 3
WARRANTY.......................................... 2
SAFETYRULES...................................... 2-5
FEATURESANDCONTROLS.............................. 6
ASSEMBLY........................................ 7-10
OPERATION....................................... 11-15
SPECIFICATIONS..................................... 16
MAINTENANCE.................................... 17-21
STORAGE........................................... 22
TROUBLESHOOTING.................................. 23
REPLACEMENTPARTS.............................. 24-29
EMISSIONCONTROLWARRANTY..................... 30-31
ESPANOL......................................... 32-55
HOWTO ORDERPARTS........................ BACKPAGE
ONE-YEARFULLWARRAHTYONCRAFTSMAHPRESSUREWASHER
If this pressurewasher fails dueto a defectin material or workmanship within one year from the dateof purchase,return it to
any Searsstore, other Craftsman outlet, or SearsParts & RepairCenterin the UnitedStates or Canadafor free repair (or
replacementif repair proves impossible).
All warranty coverageapplies for only 90 days from dateof purchaseif this pressure washer is ever usedfor commercial or
rentalpurposes.
This warranty gives you specific legal rights, and you mayalso haveother rights which vary from stateto state.
Sears, Roebuck and Co., Hoffman Estates, IL 60178
Sears Canada Inc., Toronto, Ontario, Canada M5B 288
,_ Thisisthe safetyalert symbol.It isusedto alert youtopotentialpersonalinjuryhazards.Obeyall safetymessages
thatfollow thissymboltoavoid possibleinjuryor death.
_Read this manualcarefully and becomefamiliar
with yourpressurewasher. Knowits applications,
its limitations, and any hazardsinvolved.
Thesafety alert symbol (,i_) is usedwith a signal word
(DANGER,CAUTION,WARNING),a pictorial and/or a safety
messageto alert you to hazards.BANGERindicatesa hazard
which, if not avoided, willresult in deathor serious injury.
WARNINGindicates a hazardwhich, if not avoided, could
result in deathor serious injury. CAUTIONindicatesa hazard
which, if not avoided, might result in minor or moderate
injury. NOTlCEindicatesa situation that could result in
equipment damage. Follow safety messagesto avoid or
reducethe risk of injury or death.
Hazard Symbolsand Meaninos
ToxicFumes Kickback
2 5-
SlipperySurface Fall
Fire
Explosion
ElectricalShock
FluidInjection
Operator'sManual
MovingParts FlyingObjects
HotSurface
© SearsBrands, LLC
WARHJNG
Theengineexhaustfromthisproductcontains
chemicalsknowntotheState of California tocause
cancer,birthdefects,or otherreproductiveharm.
WARNING
Certain componentsinthis productand relatedaccessories
containchemicalsknownto the State of California to cause
cancer,birthdefects,orotherreproductiveharm.
Washhandsafter handling.
WARNING
Runningengine gives off carbon monoxide, an
odorless, colorless, poison gas.
Breathingcarbon monoxide can cause headache,
_ atigue, dizziness,vomiting, confusion, seizures,
nausea,fainting or death.
Some chemicals or detergents may be harmful if
inhaled or ingested, causing severe nausea,
fainting, or poisoning.
. OperatepressurewasherONLYoutdoors.
• Keepexhaustgasfromenteringaconfinedareathrough
windows,doors,ventilationintakes,or otheropenings.
• DONOTstartor runengineindoorsor in anenclosedarea,
evenif windowsanddoorsareopen.
. Usea respiratoror maskwheneverthereisa chancethat
vaporsmaybeinhaled.
• Readall instructionswith masksoyouarecertainthemaskwill
providethenecessaryprotectionagainstinhalingharmful
vapors.
WARHIHG
_¢ isk of electrocution.
Contactwith power source can causeelectric
shock or burn.
• NEVERspraynearpowersource.
WARHIHG
Fueland its vapors are extremely flammable and
explosive.
Fireor explosion cancause severe burns or
death.
WHENADDINGORDRAININGFUEL
• TurnpressurewasherOFFandletit coolatleast2 minutes
beforeremovingfuelcap.Loosencapslowlyto relievepressure
in tank.
• Fillor drainfueltankoutdoors.
. DONOToverfilltank.Allowspaceforfuelexpansion.
• Iffuelspills,waituntilit evaporatesbeforestartingengine.
. Keepfuelawayfromsparks,openflames,pilotlights,heat,and
otherignitionsources.
. DONOTlighta cigaretteorsmoke.
WHENSTARTINGEQUIPMENT
. Ensuresparkplug,muffler,fuelcap,andair cleanerarein
place.
• DONOTcrankenginewith sparkplugremoved.
WHENOPERATINGEQUIPMENT
• DONOTtip engineor equipmentat anglewhichcausesfuelto
spill.
. DONOTsprayflammableliquids.
WHENTRANSPORTINGORREPAIRINGEQUIPMENT
• Transport/repairwithfueltank EMPTYor withfuelshutoffvalve
OFF.
• Disconnectsparkplugwire.
WHENSTORINGFUELOBEQUIPMENTWITH FUELIN TANK
• Storeawayfromfurnaces,stoves,waterheaters,clothes
dryers,or otherappliancesthathavepilotlightor otherignition
sourcebecausetheycanignitefuelvapors.
WARHJHG
Startercord kickback(rapid retraction) can result
in bodily injury. Kickbackwill pull handand arm
_,_.< toward engine faster than you can let go.
Brokenbones, fractures, bruises, or sprains
could result.
• NEVERpull starter cord without first relieving spray gun
pressure.
. When starting engine, pull cord slowly until resistanceis felt
andthen pull rapidly to avoid kickback.
• After eachstarting attempt, where enginefails to run, always
point spray gun in safe direction, press red button and squeeze
spray gun trigger to releasehigh pressure.
• Firmly grasp spray gun with both handswhen using high
pressure spray to avoid injury when spray gun kicks back.
%
WARHIHG
Useof pressure washer cancreate puddles and
slippery surfaces.
Kickbackfrom spray gun cancause you to fall.
. Operatepressure washer from astable surface.
• The cleaningarea should haveadequate slopes and drainageto
reducethe possibility of a fall dueto slippery surfaces.
. Be extremelycareful if you must usethe pressure washer from
a ladder,scaffolding, or any other similar location.
• Firmly grasp spray gun with both hands when using high
pressure spray to avoid injury when spray gun kicks back.
WARHIHG
_ Contact with muffler result in serious
area can
burns.
_ Exhaustheat/gases can ignite combustibles,structures or damagefuel tank causing a fire.
• DO NOTtouch hot parts andAVOID hot exhaust gases.
. Allow equipmentto cool before touching.
• Keepat least 5feet (152 cm) of clearanceon all sides of
pressure washer including overhead.
• Codeof FederalRegulation (CFR)Title 36 Parks, Forests,and
Public Property require equipment powered by an internal
combustion engine to have aspark arrester, maintained in
effective working order, complying to USDAForestservice
standard 5100-1C or later revision. Inthe State of California a
spark arrester is requiredunder section 4442 of the California
Public resources code. Other statesmay havesimilar laws.
WARHIHG
The high pressure stream of water that this
equipment produces can cut through skin and its
_ nderlying tissues, leading to serious injury and
)ossible amputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected,
which can cause injury.
• DONOTallow CHILDRENto operate pressure washer.
. NEVERrepair high pressure hose. Replaceit.
• NEVERrepair leaking connections with sealantof any kind.
Replaceo-ring or seal.
• NEVERconnect high pressure hoseto nozzle extension.
. Keephigh pressure hose connectedto pump and spray gun
while system is pressurized.
• ALWAYSpoint spray gun in safe direction, pressred button
and squeezespray gun trigger to releasehigh pressure, every
time you stop engine.
• NEVERaim spray gun at people,animals, or plants.
. DONOTsecure spray gun in open position.
• DO NOTleavespray gun unattendedwhile machine is running.
. NEVERusea spray gun which does not have atrigger lock or
trigger guard in placeand in working order.
. Always be certain spray gun, nozzlesand accessoriesare
correctly attached.
WARHIHG
_ Unintentionalsparking can result in fire or
_¢ electric shock.
WHENADJUSTINGORMAKINGREPAIRSTOYOUR
PRESSUREWASHER
. Disconnectthe sparkplug wire from the spark plug and place
the wire where it cannot contact spark plug.
WHENTESTINGFORENGINESPARK
. Use approved sparkplug tester.
• DONOTcheck for sparkwith spark plug removed.
WARHJHG
Starter and other rotating parts canentangle
hands, hair, clothing, or accessories.
* NEVERoperate pressure washer without protective housing or
covers.
* DO NOTwear loose clothing, jewelry or anything that may be
caught in the starter or other rotating parts.
* Tie up long hair and remove jewelry.
WARNING
Risk of eye injury.
" _ JSpraycan splash back or propel objects.
Alwayswear safetygoggles when using this equipment or in
vicinity of where equipment is in use.
Beforestarting the pressure washer, be sureyou are wearing
adequatesafety goggles.
NEVERsubstitute safetyglasses for safety goggles.
NOTICE
High pressure spray may damage fragile items including
lass.
DO NOTpoint spray gun at glasswhen using red (0°) nozzle.
NEVERaim spray gun at plants.
NOTICE
Improper treatment of pressure washer can damage it and
shorten its life.
Ifyou have questions about intended use, ask dealer or contact
Sears.
NEVERoperate units with broken or missing parts, or without
protective housing or covers.
DONOT by-pass any safety device on this machine.
DONOTtamper with governed speed.
DONOToperate pressure washer above rated pressure.
DONOT modify pressure washer in any way.
Before starting pressure washer in cold weather, check all parts
of the equipmentto besure ice has not formed there.
NEVERmove machine by pulling on hoses. Use handle
provided on unit.
Checkfuel system for leaksor signs of deterioration, such as
chafed or spongy hose,loose or missing clamps, or damaged
tank or cap. Correctall defects beforeoperating pressure
washer.
This equipment is designedto be usedwith Searsauthorized
parts ONLY.If equipment is usedwith parts that DO NOT
comply with minimum specifications, userassumes all risks
and liabilities.
KNOWYOURPRESSUREWASHER
_Read the Operator'sManual and safety rulesbefore operatingyourpressurewasher.
Comparethe illustrations with your pressurewasher to familiarizeyourself with the locations of various controls and
adjustments. Savethis manualfor future reference.
!
A - Spray Gun-- Controlsthe application of water onto
cleaningsurfacewith trigger device.Includestrigger lock.
B - PrecisienSprayTM Nozzles-- General,max,jet flush, jet
soap, and fansoap nozzlesfor various pressure cleaning
applications.
C- Accessory Tray-- Providesconvenientstorage for
accessories,such as gun, nozzles,etc.
D - Recoil Starter -- Used for starting the engine manually.
E - Battery/Electric Starter -- Used for starting the engine.
F - FuelTank-- Fill tank with regular unleadedfuel. Always
leaveroom for fuel expansion.
G - Air Filter -- Protects engine by filtering dust and debris
out of intake air.
H - Throttle Lever-- Setsengine in starting modefor recoil
starter and stops a running engine.
J - Primer Bulb-- Preparesa cold enginre for starting.
I{ - Pump -- Developshigh pressure.
L - High Pressure Outlet-- Connectionfor high pressure
hose.
IVl- Water Inlet -- Connectionfor garden hose.
N - Automatic Cool DownSystem -- Cycleswater through
pump whenwater reaches125°-155°F. Warm water will
dischargefrom pump onto ground. This system prevents
internalpump damage.
P - Oil Fill/Dipstick -- Check,add and drain engine oil here.
Q - Bottle Bracket -- Cleaningsolution bottle fits in wire
form bracket here.Concentratebottle not included.
R - NozzleExtensionwith QuickConnect-- Allows you to
switch betweenfive different nozzles.
S - HoseWrap and HighPressureHose-- Hosewrap
provides easytransport and handling of the high pressure
hose. Connectone end of hoseto water pump and the
other end to spray gun.
T - Fold DownHandle -- Handleand accessorytray fold flat
atop cold enginefor space-saving storage.
U - Project Pro_ PerfectlViWMSiphon -- Mixes concentrate
with pressure washer spray.
Items Not Shown:
DetergentSiphoning Tube/Filter-- Useto siphon pressure
washer safe detergentsinto the lowpressure stream.
Identification Label (near rear of baseplate) -- Provides
model and serial number of pressurewasher. Pleasehave
these readilyavailableif calling for assistance.
Safety Goggles-- Always usethe enclosedsafety goggles
when running your pressure washer.
Warning/Operating instructionsTag-- Identifies hazards
and proper procedureto start/stop pressurewasher.
Yourpressurewasherrequiressomeassemblyandisready
foruseonlyafterithasbeenproperlyservicedwiththe
recommendedoilandfuel.
If you haveany problemswith the assembly of your
pressurewasher, please call the pressurewasher helpline
at 1-800=222=3136.
UHPACi(THEPRESSUREWASHER
1. Removeeverything from carton exceptpressure washer.
2. Opencarton completely bycutting eachcorner from top
to bottom.
3. Removepressure washer from carton.
CARTONCONTENTS
Checkall contents. If any parts are missing or damaged,call
the pressure washer helpline at 1-800-222-3136.
• Main Unit
• Handle
• AccessoryTray
• High PressureHose
• Spray Gun
• NozzleExtensionwith Quick ConnectFitting
• Bottle BracketWireform
• Oil Bottle
• StandardSiphoning Hose
• HoseWrap
• Batterywith KeyStart
• BatteryCharger
• Parts Bag (which includes the following):
• Operator's Manual
• Owner's Registration Card
• SafetyGoggles
• PerfectMixTMSiphoning Unit/Hose
• Bagcontaining 5 PrecisionSprayTM Nozzles
• HandleFasteningHardwareKit (whichincludes):
• Keys (2)
• HandleBolts (2)
• CarriageBolt (2)
• Plastic Knobsfor Handle(2)
• RopeGuide (1)
• Plastic Knob (3)
• TreeClips (4)
Becomefamiliar with eachpiecebefore assemblingthe
pressure washer. Identify all contents with the illustration on
page 6. If any parts are missing or damaged,callthe
pressure washer helpline at 1-800-222-3136.
ASSEMBLINGPRESSUREWASHER
Your Craftsmanpressure washer will need assembly before
operation:
1. Fill out and send in registration card.
2. Attach handleand accessorytray.
3. Connectdetergentsiphon hoseto pump.
4. Attach battery/key start.
5. Add oil to engine crankcase.
6. Add fuelto fuel tank.
7. Connectpressure hoseto spray gun and pump.
8. Connectwater supply to pump.
9. Attach nozzleextension to spray gun.
10. Select/attachquick connect nozzleto nozzleextension.
Attach Handle, Accessory Tray, Rope Guide, and
Hose Wrap and Bottle Bracket
1. Placehandle (A) onto handlesupports (B) connectedto
main unit. Make sure holes (C) in handlealign with holes
(C) on handle supports.
Insert handle carriagebolts (8) through holes from
inside of unit and attacha plastic knob (E)from outside
of unit. Tighten by hand. Byloosening both knobs to the
middle section of the attachment bolt, the upper handle
can fold forward to store flat atop the cold engine. Note:
DONOTfold the handle down while the engine is hot.
Placeaccessorytray (F) over holes (6) on handle
(viewing from back of unit). Pushthe tree clips (H) into
the holes until they sit flat againstthe accessorytray.
Insert PrecisionSprayTM nozzlesand other supplied
accessories in spacesprovided in accessorytray.
SeeHow to UseAccessory Tray.
B,
,
Attach rope guide (A) through handlewith plastic knob
(B). Tighten by hand. Routeengine recoil rope through
guide.
Align hosewrap (C)to the back side of accessorytray.
Locate notch with "unlock"icon (8) on hosewrap.
Position notch attop with hosewrap in vertical position.
Clips in the back of accessorytray should slide into the
grooves on the inside surface of hose wrap. Slide hose
wrap on back of accessorytray and rotate 1/8 turn until
"locked"icon (E) is in vertical position. Hosewrap is
easily removed from the accessorytray for wrapping and
unwrapping ofthe high pressure hose. A clip to secure
the hose on the reel makesit easyto wrap the hose
while it is detachedfrom the accessorytray.
/
7. Attach battery (F) to handlewith carriagebolt (G) and
black plastic knob (H). Tighten by hand.
8. Attach battery lead (J) to the similar connection under
the fuel tank. Pressthe endstightly together by hand.
NOTE:If your batteryis discharged,charge prior to use
following the instructions in the sectionBatteryFloatCharger.
Attach bottle bracket (K) to handlewith carriage bolt (L)
and black plastic knob (M). Tighten by hand.
2-1N-1SIPHONSYSTEM
The pressure washer is equipped with two detergent
siphoning hoses.
Standard Clear Siphon Tube
Cleartube with filter:
Whenusingthedearsiphontube,dilute
1partconcentrateto 16parts water
(4 ozofstandardconcentratemakes
1/2gaflonof mix.)
ProjectPro®PerfectMix'_ Siphon
Bluetube with blue bottle cap:
WhenusingthebluePerfectMixTMsiphon,
usetheconcentratestraightfrom thebottle
(OnequartbottleofPerfectMixT'_concentrate
makes4.25gaflonsofsoapspray.)
Attach Project Pro®PerfectMix TM Siphon to Pump
Attach the hose end of the blue Project Pro®PerfectMix,M
Siphon (N)to the barbed hosefitting (P)on the pump.
Attach PerfectlVlix,. Detergent Siphon
to Concentrate Bottle
PlaceProject Pro®PerfectlY]ix7_bottle (not included) in the
wire-form bracket on the handle.Removecap from bottle
and insert the Project Pro®PerfectMix,MSiphon (Q). Screw
the siphon unit to the top of the bottle (R). Usethe clip on
the cap (Q) to snap siphon to wire form bracketwhen siphon
is not in a concentrate bottle.
Add Engine 0iJ
1. Placepressure washer on a flat, ]eve]surface.
2. Cleanarea around oil fill and remove yellow oil fill
cap/dipstick.
3. Using oil funnel (optional), slowly pour contents of
provided oil bottle intooil fill opening.
NOTICE
Improper treatment of pressurewasher can damageit and
shorten its life.
DONOTattempttocrankor starttheenginebeforeit hasbeen
properlyservicedwith therecommendedoil.Thismayresultin
anenginefailure.
4. Replaceoil fill cap/dipstick and fully tighten.
Add Fuel
Fuel mustmeetthese requirements:
* Clean,fresh, unleadedgasoline.
* A minimum of 87 octane/87 AKI (91 RON).Highaltitude
use, see HighAltitude.
* Gasolinewith upto 10% ethanol (gasohoI) or up to 15%
MTBE (methyltertiary butyl ether) is acceptable.
NOTICE
Avoid pressure washer damage.
Failureto follow Operator's Manualfor fuel
recommendations voids warranty.
DONOTuseunapprovedgasolinesuchasE85.
DONOTmixoil in gasoline.
DONOTmodifyengineto runon alternatefuels.
To protect the fuel system from gum formation, mix in a fuel
stabilizer whenadding fuel. SeeStorage.All fuel is not the
same. If you experiencestarting or performanceproblems
after using fuel, switch to a different fuel provider or change
brands. This engine is certified to operateon gasoline. The
emission control system for this engine is EM (Engine
Modifications).
WARHIHG
FueIand its vaporsare extremely flammable and
explosive.
Fireor explosion can causesevere burns or
death.
WHENADDIN6FUEL
* TurnpressurewasherOFFandletit coolatleast2 minutes
beforeremovingfuelcap.Loosencapslowlyto relievepressure
in tank.
. Fillfueltank outdoors.
* DONOToverfilltank.Allowspacefor fuelexpansion.
* If fuelspills,waituntilit evaporatesbeforestartingengine.
* Keepfuelawayfromsparks,openflames,pilotlights,heat,and
otherignitionsources.
. DONOTlighta cigaretteor smoke.
1. Cleanareaaround fuel fill cap, removecap.
2. Slowly add regular unleadedfuel (A) to fuel tank (B). Be
careful not to overfill. Allow about 1.5"(4 cm) (C)of tank
space for fuel expansion.
3. Install fuel cap and wait for any spilled fuel to evaporate.
CAUTION! Alcohol-blendedfuels (calledgasohol, ethanol or
methanol) canattract moisture, which leadsto separation and
formation of acids during storage.Acidic gas candamagethe
fuel system of an engine while in storage.
To avoid engine problems, the fuel systemshould be treated
with a fuel preserver or emptied beforestorage of 30 days or
longer. If adding a fuel preserver,fill the fuel tank with fresh
fuel. If only partially filled, air inthe tank will promote fuel
deterioration during storage. If fuel preserver is not used,
drain the fuel tank, start the engineand let it run until the fuel
linesand carburetor are empty. Usefresh fuel next season.
SeeStoragefor additional information.
NEVERuse engine or carburetor cleaner products in the fuel
tank as permanent damagemay occur.
HighAltitude
At altitudes over5,000 feet (1524 meters), a minimum
85 octane/ 85 AKi (89 RON)gasoline isacceptable.To
remainemissions compliant, high altitude adjustment is
required. Operationwithout this adjustment will cause
decreasedperformance, increased fuel consumption, and
increasedemissions. Seea qualified Searsdealerfor high
altitude adjustment information. Operationof the engine at
altitudes below 2,500 feet (762 meters)with the high altitude
kit is not recommended.
Connect Hose and Water Supply to Pump
[ NOTICE
DONOTrun the pump without the water supply connected
and turned on.
L amageto equipmentresultingfrom failureto followthisinstructionwillvoidwarranty.
NOTE:Removeand discardthe shipping caps from the
pump's high pressureoutlet and water inlet beforeattaching
hoses.
1. Uncoil high pressure hose and attach one end of hoseto
baseof spray gun. Tighten by hand.
WARHIHG
The high pressure stream of water that this
_ quipment produces cancut through skin and its
underlyingtissues, leadingto serious injury and
)ossible amputation.
* NEVERconnecthighpressurehoseto nozzleextension.
. Keephighpressurehoseconnectedto pumpandspraygun
whilesystemispressurized.
. Alwaysbecertainspraygun,nozzlesandaccessoriesare
correctlyattached.
2. Attach other end of high pressure hoseto high pressure
outlet on pump. Tighten by hand.
3. Beforeconnectinggarden hoseto water inlet, inspect
inlet screen (A). Cleanscreen if it contains debris or have
it replacedif damaged.DONOTrun pressurewasher if
inlet screenis damaged or missing.
4. Run water through garden hose for 30 secondsto flush
it of debris. Turn off water.
IMPORTANT:DONOTsiphon standing water for the water
supply. UseONLYcold water (less than IO0°F).
5. Connectgarden hose (not to exceed50 feet in length) to
water inlet. Tighten by hand.
NOTICE
Using a OneWay Valve(vacuum breakeror check valve)at
pump inlet cancause pump or inlet connector damage.
ThereMUSTbeatleasttenfeetofunrestrictedgardenhose
betweenthe pressurewasherinletandanydevice,suchasa
vacuumbreakerorcheckvalve.
Damageto equipmentresultingfrom failuretofollowthis
instructionwillvoidwarranty.
6. Turn ONthe water, press red button (B) on the gun and
squeezethe trigger to purge the pump system of air
and impurities.
WARHIHG
m
Riskof eyeinjury.
_Spray cansplash back or propel objects.
Alwayswearsafetygoggleswhenusingthis equipmentor in
vicinityof whereequipmentisin use.
Beforestartingthepressurewasher,besureyouarewearing
adequatesafetygoggles.
NEVERsubstitutesafetyglassesfor safetygoggles.
ChecklistBefore StartingE.gi.e
Reviewthe unit to ensureyou have performed all of the
following:
1. Besure to read SafetyRubs and Operationsections
before usingthe pressure washer.
2. Makesure handle is in placeand secure.
3. Attach batteryto handleand makethe connection.
4. Checkthat oil has beenadded to proper levelin engine
crankcase.
5. Add proper fuelto fuel tank.
6. Checkfor proper hoseconnections (high pressure and
water supply) and that there are no kinks, cuts, or
damageto the high pressure hose.
7. Provideproper water supply (not to exceedIO0°F).
Battery Float Charger
Usebattery float chargerjack to keepthe starting battery
charged and readyfor use. Batterycharging should be done
in a dry location, such as inside a garage.
1. Plug charger into unit's "Battery FloatCharger"jack (C),
which is located next to the key start. Plug battery
charger into a 120 Volt AOwall receptacle.
/ /_ _©
2. Unplugcharger from unitand walloutlet when pressure
washer is beingstarted and while it is in operation.
3. Keep this charger plugged in when pressure washer is
not in use to prolong battery life. The charger has a built
in float equalizer and will not overcharge the battery,
even when plugged in for an extended period of time.
IMPORTANT:SeeBatteryMaintenancefor additional
information.
WARHIHG
Batteryposts,terminals and relatedaccessoriescontain
lead and lead compounds- chemicalsknowntothe State of
California tocausecancerand reproductiveharm.
Wash handsafter handling.
10
HOWTO USEYOURPRESSUREWASHER
If you haveany problems operatingyour pressure washer,
pleasecallthe pressure washer helpline at 1-808-222-3136.
Pressure Washer Location
PressureWasherClearance
WARNING
_ Exhaustheat/gases can ignitecombustibles,
structures or damagefuel tank causing a fire.
• Keepatleast5ft. (152cm)clearanceonall sidesofpressure
washerincludingoverhead.
Placepressure washer outdoors in an areathat will not
accumulate deadlyexhaustgas. DONOTplacepressure
washer where exhaustgas (A) could accumulateand enter
inside or be drawn into a potentially occupied building.
Ensureexhaustgas is kept awayfrom any windows, doors,
ventilation intakes, or other openingsthat can allow exhaust
gasto collect in a confined area. Prevailingwinds and air
currents should be taken into considerationwhen positioning
_ressurewasher.
WARHIHG
Runningengine gives off carbon monoxide, an
_ dorless, colorless, poison gas.
Breathingcarbon monoxide can causeheadache,
fatigue, dizziness,vomiting, confusion, seizures,
nausea,fainting or death.
. OperatepressurewasherONLYoutdoors.
• Keepexhaustgasfromenteringaconfinedareathrough
windows,doors,ventilationintakes,or otheropenings.
• DONOTstartor runengineindoorsor in anenclosedarea,
evenif windowsanddoorsareopen.
To Start Your Pressure Washer
To start your engine-powered pressurewasher for the first
time, follow these instructions step-by-step. This information
also applies wheneveryou start the engine after you havelet
the pressure washer sit idle for at least a day.
IMPORTANT:Always unplugthe batteryfloat charger before
starting the pressure washer.
1. Placepressure washer outside near an water source
capableof supplying water at a flow rategreater than
3.3 gallons per minute and no less than 20 PSIat
pressurewasher end of garden hose.
2. Checkthat high pressure hose istightly connectedto
spray gun and pump. SeeAssemblyfor illustrations.
3. Makesure unit is in a levelposition.
4. Connectgarden hoseto water inlet on pressurewasher
pump.
[ NOTICE
JDONOT the without the connected
run
pump
water
supply
and turned on.
L amageto equipmentresultingfrom failureto followthisinstructionwillvoidwarranty.
5. Turn ONthe water,press red button on the gun and
squeezethe trigger to purge the pump system of air and
impurities.
6. Attach nozzleextension to spray gun. Tighten by hand.
ChoosePrecisionSprayTMnozzleyou want to use, pull
back on collar of nozzleextension, insert nozzle and
releasecollar. Tug on nozzleto make sure it is securely
in place.See How to Use PrecisionSpraSMNozzle
System.
8. Move throttle lever (A) to "Fast" position, shown here as
a rabbit.
To start the engine for theveryfirst time:
9. Push primer bulb (B) firmly 5 times, waiting 2seconds
betweeneach push.
To start engine thereafter:
10. Press primer bulb firmly 3 times, waiting 2 seconds
betweeneach push. Fora warm engine, DONOTpress
primer bulb.
IMPORTANT:Beforestarting the pressure washer, be sure
/ou are wearing adequatesafety goggles.
WARHIHG
Riskof eyeinjury.
_Spray cansplash back or propel objects.
Alwayswearsafetygoggleswhenusingthis equipmentor in
vicinityof whereequipmentisin use.
Beforestartingthepressurewasher,besureyouarewearing
adequatesafetygoggles.
NEVERsubstitutesafetyglassesfor safetygoggles.
11. For manual start: When starting engine, position
yourself as recommended, grasp handleand pull recoil
starter lightly until you feelsome resistance,then pull
briskly.
12. Return recoil starter slowly. DONOTlet rope "snap
back" againststarter.
WARHIHG
Starter cord kickback(rapid retraction) can result
in bodily injury. Kickbackwill pull handand arm
_< toward enginefaster thanyou canlet go.
Brokenbones, fractures, bruises, or sprains
could result.
• NEVERpullstartercordwithoutfirst relievingspraygun
pressure.
• Whenstartingengine,pullcordslowlyuntilresistanceisfelt
andthenpullrapidlyto avoidkickback.
• Aftereachstartingattempt,whereenginefailsto run,always
pointspraygunin safedirectionpressredbuttonandsqueeze
sprayguntriggerto releasehighpressure.
• Firmlygraspspraygunwith bothhandswhenusinghigh
pressuresprayto avoidinjurywhenspraygunkicksback.
13. For electricstart: turn key until engine cranks and
starts. Limit electricstart cycles to 5 seconds per every
30 secondsto prolong starter life. If engine fails to start,
review Troubleshooting.
WARHIHG
Thehigh pressurestream of water that this
equipment produces cancut through skin and its
,p_ underlyingtissues, leadingto serious injury and
)ossible amputation.
Spray gun traps high water pressure,evenwhen
engine is stopped and water is disconnected,
which can cause injury.
* DONOTallowCHILDRENtooperatepressurewasher.
, Keephighpressurehoseconnectedto pumpandspraygun
whilesystemispressurized.
, NEVERaimspraygunatpeople,animals,or plants.
* DONOTsecurespraygun inopenposition.
, DONOTleavespraygununattendedwhilemachineis running.
* NEVERuseaspraygunwhichdoesnothaveatriggerlockor
triggerguardin placeandin workingorder.
, Alwaysbecertainspraygun,nozzlesandaccessoriesare
correctlyattached.
WARHIHG
_ Contact with muffler result in serious
area can
burns.
,_ Exhaustheat/gases can ignite combustibles,structures or damagefuel tank causing a fire.
* DONOTtouchhotpartsandAVOIDhotexhaustgases.
, Allowequipmenttocoolbeforetouching.
* Keepatleast5 feet(152cm) ofclearanceonall sidesof
pressurewasherincludingoverhead.
, Codeof FederalRegulation(CFR)Title36Parks,Forests,and
PublicPropertyrequireequipmentpoweredbyaninternal
combustionengineto haveasparkarrester,maintainedin
effectiveworkingorder,complyingto USDAForestservice
standard5100-1Cor laterrevision.IntheStateof Californiaa
sparkarresterisrequiredundersection4442oftheCalifornia
Publicresourcescode.Otherstatesmayhavesimilarlaws.
12
14.Aftereachstartingattempt,whereenginefailstorun,
alwayspointguninsafedirection,pressredbuttonand
squeezesprayguntriggertoreleasehighpressure.
WARHIHG
The high pressure stream of water that this
equipment produces cancut through skin and its
_ nderlying tissues, leadingto serious injury and
_ossibleamputation.
Spray gun traps highwater pressure,evenwhen
engine is stopped and water is disconnected,
which can cause injury.
• Keephighpressurehoseconnectedto pumpandspraygun
whilesystemispressurized.
• ALWAYSpointspraygunin safedirection,pressredbutton
andsqueezesprayguntrigger,to releasehighpressure,every
time youstopengine.
NOTE:Alwayskeepthe throttle leverin the "Fast" position
when operatingthe pressure washer.
How to Stop Your Pressure Washer
1. Releasespray gun trigger and letengine idle for two
minutes.
2. Movethrottle to SLOWposition,then STOPposition.
3. ALWAYSpoint spray gun in a safe direction, push red
button and squeezespray gun trigger to releaseretained
high water pressure.
iMPORTANT:Spraygun traps high water pressure,even
when engine is stopped and water is disconnected.
Howto UseAccessoryTray
The unit is equipped with an accessorytray with placesto
store your spray gun, nozzleextensionand quick connect
PrecisionSprayTM nozzles.Thereis also a detachablehose
wrap at the back of the accessorytray to hold your high
pressure hose.
1. Placenozzleextensioninclip on backof accessorytray.
2. Placespray gun through hole on accessorytray on right
side of unit.
3. Insert multi-colored nozzlesin spacesprovided in
accessorytray.
4. Wrap high pressure hose on hose wrap then attach hose
wrap to back of accessorytray.
5. Hook provided on back of accessorytray for safely
storing safety goggles.
How to Use PrecisionSprayTM Hozzle System
Thequick-connect on the nozzleextensionallows you to
switch between five different PrecisionSprayTM system
nozzles. PrecisionSprayTM nozzlescan be changedwhile
pressure washer is running oncespray gun trigger lock is
engaged.
Foflowthese instructionsto changePrecisionSprayTM
flozzJes:
1. Pull backcollar on quick-connect and pull current
PrecisionSprayTM nozzleoff. Store PrecisionSprayTM
nozzlesin holder provided on the accessorytray.
WARHIHG
Thehigh pressure stream of water that this
_ equipment produces can cut through skin and itsiundery ng tissues, leadingto serious injury and
jpossible amputation.
, NEVERexchangenozzleswithoutthetriggerlockedonthe
spraygun.
, DONOTtwist nozzleswhilespraying.
2. Select desired PrecisionSprayTM nozzle:
• Selectorange general PrecisionSprayTM nozzlefor all
purpose cleaning. Cleansvinyl siding, brick patios,
concrete driveways and other surfaces.
* Selectred max PrecisionSprayTM nozzlefor maximum
cleaning.Greatfor cleaningstubbornstains, including
grease,tar, wax,and otherhardto removestains.
Selectcyan jet flush PrecisionSprayTM nozzlefor
quick high flow clean upand long reachcleaning of
second story siding and windows.
JETFLUSH
13
* Select magentajet soap PrecisionSprayTM nozzleto
launch soapto second story siding and windows.
Select black fan soap PrecisionSprayTM nozzlefor
generalcleaning. Greatfor applying soapto
vehicles, boats, driveways, decks,and patios.
FAN SOAP
3. Pull backon collar,insert newPrecisionSprayTM nozzle
and releasecollar.Tug on nozzleto makesureit is securely
in place.
UsageTips
• Formost effective cleaning, keepPrecisionSprayTM nozzle
from 8 to 24 inches (20 to 61 cm) awayfrom cleaning
surface.
• If you get PrecisionSprayTM nozzletoo close, especially
usinga high pressure nozzle,you may damagesurface
being cleaned.
• DONOTget closer than 6 inches (15 cm) when cleaning
tires.
2-IN-1 SIPHONSYSTEM
Cleaning and Applying Detergent with
the Project Pro®PerfectMix TM Siphon
CAUTIOH
Chemicalscan causebodily injury, and/or property
damage.
NEVERusecausticliquidwith pressurewasher.
UseONLYpressurewashersafedetergents/soaps.Followall
manufacturersinstructions.
To apply undiluteddetergent using
the blue PerfectMixTM siphen,
felJow thesesteps:
1. Reviewuse of PrecisionSprayTM nozzles.
2. Attach PerfectMixTM siphon hoseto
pump and PerfectMixTM concentrate
bottle.
3. Make sure fan soap (black) or jet soap
nozzle(magenta)is installed.
NOTE:Detergentcannot beapplied with the high pressure
nozzles(Cyan,Orangeor Red).
4. Makesure garden hose is connectedto water inlet.
Checkthat high pressure hose is connectedto spray gun
and pump. Turn on water.
NOTICE
You must attachall hosesbefore you start the engine.
Startingtheenginewithoutalltile hosesconnectedandwithout
thewaterturnedONwill damagethepump.
Damageto equipmentresultingfrom failureto followthis
instructionwillvoidwarranty.
5. Start engine following instructions How to Start Your
Pressure Washer.
6. Placethreadedend of detergent siphoning tube into
detergentcontainer. Tighten by hand.
7. Apply detergentto a dry surface, starting at lower
portion of areato be washed and work upward, using
long, even, overlappingstrokes.
8. Allow detergentto "soak in" for 3-5 minutes before
washing and rinsing. Reapplyas neededto prevent
surface from drying. DONOTallow detergent to dry on
(preventsstreaking).
Cleaning and Applying Detergent with
the Standard Clear Siphon
To apply diluted detergentusingthe
standard cJearsiphontube,
felJew these steps:
1. Reviewuseof
PrecisionSprayTM nozzles.
2. Attach clear siphon hoseto pump.
3. Mix detergent solution as required by job.
4. Placesmall filter end of clear siphoning tube into
container with diluted solution as described above.
NOTICE
Contact with the hot muffler can damagedetergent
siphoning tube.
Wheninsertingthesiphonintoa detergentsolutionbottle,
routethetubesoasto keepit from inadvertentlycontactingthe
hotmuffler.
NOTE:Makesure the filter is fully submerged in fluid while
applying solution.
5. Makesure fan soap (black) or jet soap nozzle(magenta)
is installed.
NOTE:Detergentcannot beapplied with the high pressure
nozzles(Cyan,Orangeor Red).
6. Makesure garden hose is connectedto water inlet.
Checkthat high pressure hose is connectedto spray gun
and pump. Turn on water.
7. Start engine following instructions How to Start Your
Pressure Washer.
14
8. Applydetergenttoadrysurface,startingatlower
portionofareatobewashedandworkupward,using
long,even,overlappingstrokes.
9. Allowdetergentto"soakin"for3-5minutesbefore
washingandrinsing.Reapplyasneededtoprevent
surfacefromdrying.DONOTallowdetergenttodryon
(preventsstreaking).
IMPORTANT:Youmustflushthedetergentsiphoningsystem
aftereachusebyplacingthefilterintoabucketofclean
water,thenrunthepressurewasherinlowpressurefor1-2
minutes.
PressureWasherRinsing
ForRinsing:
1. Removesoap nozzlefrom nozzleextension.
2. Selectand install desiredhigh pressure nozzlefollowing
instructions How to Use Precision SprayNozzleSystem.
3. Keepthe spray gun a safe distance from the areayou
plan to spray.
WARHIHG
/_ spray gun can cause you
Kickbackfrom to fall.
. Operatepressurewasherfrom astablesurface.
• Beextremelycarefulif youmustusethepressurewasherfrom
a ladder,scaffolding,or anyothersimilarlocation.
. Firmlygraspspraygunwith bothhandswhenusinghigh
pressuresprayto avoidinjurywhenspraygunkicksback.
4. Apply a high pressure spray to a small area,then check
the surfacefor damage.If no damageis found, it is okay
to continue cleaning.
Start at the top of the areato be rinsed, working down
with same overlapping strokes asyou usedfor washing
and applying detergent.
,
Cleaning DetergentSiphoning Tube
If you usedthe clear detergent siphoning tube, you must
flush it with cleanwater beforestopping the engine.
1. Placedetergent siphoning tube/filter in a bucketfull of
clean water.
2. Removehigh pressure nozzlefrom nozzleextension.
3. Selectand install a soap nozzlefollowing instructions
How to Use PrecisionSprayTM NozzleSystem.
4. Flushfor 1-2 minutes.
5. Shut off engine following instructions How to Stop
Pressure Washerand turn off water supply.
6. ALWAYSpoint spray gun in a safe direction, push red
button and squeezespray gun trigger to releaseretained
high water pressure.
WARHIHG
Thehigh pressurestream of water that this
equipment produces cancut through skin and its
_ nderlying tissues, leadingto serious injury and
)ossible amputation.
Spray gun traps high water pressure,evenwhen
engine is stopped and water is disconnected,
which can cause injury.
• Keephighpressurehoseconnectedto pumpandspraygun
whilesystemispressurized.
. ALWAYSpointspraygunin safedirectionpressred buttonand
squeezesprayguntrigger,to releasehighpressure,everytime
youstopengine.
IMPORTANT:Spraygun traps high water pressure,even
when engine is stopped and water is disconnected.
Automatic Cool Down System (Thermal Relief)
If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray gun,
circulating water in the pump can reachtemperatures above
125°F.Thesystem engagesto cool the pump by discharging
the warmwater onto the ground.
15
EHGINETECHNICALJNFORMATIOH PRODUCTSPECIFICATiOHS
This is a single cylinder, overheadvalve (OHV),air cooled
engine, it is a low emissions engine.
Inthe Stateof California, Model 120000 enginesare certified
by the California Air Resources Boardto meet emissions
standardsfor 125 hours. Such certification does not grant
the purchaser, owner or operator of this engineany
additional warranties with respectto the performance or
operational life of this engine.Theengine is warranted solely
according to the product and emissions warranties stated
elsewherein this manual.
Power Ratings
Thegross power rating for individual gas engine models is
labeledin accordancewith SAE(Societyof Automotive
Engineers)codeJ1940 (Small Engine Power & Torque
Rating Procedure),and rating performance hasbeen
obtained andcorrected in accordancewith SAEJ1995
(Revision2002-05). Torquevalues are derived at3060 RPM;
horsepower values are derivedat 3600 RPM.Actual gross
engine power will be lower and is affected by, among other
things, ambient operating conditions and engine-to-engine
variability. Givenboth the wide array of products on which
enginesare placedand the variety of environmental issues
applicableto operatingthe equipment, the gas engine will not
developthe ratedgross power when used in a given pieceof
power equipment (actual "on-site"or net power). This
difference is due to a variety of factors including, but not
limited to, accessories (air cleaner, exhaust,charging,
cooling, carburetor, fuel pump, etc.), application limitations,
ambient operating conditions (temperature,humidity,
altitude), and engine-to-engine variability. Dueto
manufacturing and capacity limitations, Briggs & Stratton
maysubstitute an engine of higher ratedpower for this
Seriesengine.
This pressurewasher is rated in accordanceto the Pressure
Washer Manufacture Association (PWMA) standard PW101
(Testingand Rating Performanceof PressureWashers).
Pressure Washer Specifications
Max Outlet Pressure ....................... 2,700 PSi
Max Flow Rate............................. 2.3 GPM
DetergentMix ........................ Useasdirected
Water SupplyTemperature .......... Not to exceed IO0°F
Engine Specifications
Bore ................................. 2.69 in. (68mm)
Stroke ............................... 2.04 in. (52mm)
Displacement ........................ 11.57in. (190 cc)
SparkPlug
Type:..................... Briggs & Stratton 491055S
SetGapTo: ...................... O.020inch(0.50mm)
ArmatureAir Gap: ........... 0.006-0.014in.(O.15-O.36mm)
Valveclearancewithvalvespringsinstalledand piston1/4in.
(6 ram)pasttopdeadcenter(checkwhenengineiscold).
Intake.................... 0.004-0.006in.(0.10-0.15mm)
Exhaust .................. 0.004-0.008in.(0.10-0.20mm)
FuelCapacity............................... 1.6Quarts
OilCapacity....................... 22 Ounces(0.65liter)
NOTE:Forpractical operation, the engine load should not
exceed 85% of rated power. Enginepower will decrease
3-1/2% for each1,000 feet (300 meters) abovesea leveland
1% for each 10° F(5.6° C) above77° F(25° C). It should
operatesatisfactorily at an angle up to 15°.
16
OWHER'SRESPOHSIBILiTIES
Followthe hourly or calendarintervals, whichever occurs
first. More frequent service is required when operating in
adverseconditions noted below.
• Changeengine oil
• Check/clean water inlet screen1
• Checkhigh pressure hose
• Checkdetergentsiphoning hose
• Checkspray gun and assembly for leaks
• Cleandebris
• Checkengine oil level
• Service engineair cleaner2
• Changeengine oil2
• Service spark arrester
_ _ LLLLLL
Service spark plug
• Cleancooling system2
' Clean if clogged. Replace if perforated or torn.
Service more often under dirty or dusty conditions.
General Recommendations
Regularmaintenancewill improve the performanceand
extend the life of the pressure washer. Seeany Searsor
other qualified service dealerfor service.
The pressure washer warranty does not cover items that
havebeensubjectedto operator abuse or negligence. To
receivefull valuefrom the warranty, the operator must
maintain pressure washer as instructed in this manual
including proper storage as detailedin Storage.
Someadjustments will needto be madeperiodically to
properly maintain your pressure washer.
All service and adjustments should be madeat least once
eachseason. Followthe requirements in the Maintenance
Schedulechart above.
NOTE:Oncea yearyou should clean or replacethe spark
plug and replacethe air filter. A newspark plug and cleanair
filter assure proper fuel-air mixture and help your engine run
better and last longer.
Pump Oil
DONOTattempt any oil maintenanceon this pump.The
pump is pro-lubricated and sealedfrom the factory, requiring
no additional maintenancefor the life of the pump.
EmissionsControl
Maintenance, replacement, or repair of the emissions
control devicesand systemsmay be performedby any non-
road engine repair establishmentor individual. However,
to obtain "no charge" emissions control service, the work
must be performed by a factory authorized dealer.Seethe
Emissions Warranty.
Before Each Use
1. Checkengine oil level.
2. Cleandebris.
3. Checkwater inlet screen for damage.
4. Checkhigh pressure hose for leaks.
5. Checkgun and nozzleextension assembly for leaks.
6. Purge pump of air and contaminants.
17
PRESSUREWASHERMAINTENANCE
Clean Debris
Daily or before use, dean accumulated debris from pressure
washer. Keeplinkage, spring and controls clean. Keeparea
around and behind muffler free from any combustible debris.
Inspect cooling air slots and openings on the pressure
washer.These openings must be kept cleanand
unobstructed.
Pressurewasher parts should be kept cleanto reducethe
risk of overheatingand ignition of accumulated debris.
• Usea damp cloth to wipe exterior surfaces clean.
• Usea soft bristle brush to loosen cakedon dirt, oil, etc.
• Usea vacuum cleanerto pick up loose dirt and debris.
[ NOTICE
Improper treatment of pressure washer candamageit and
_shorten ts fe.
__DO NOTinsertanyobjectsthroughcoolingslots.
Check and Clean Inlet Screen
Examinegarden hose inlet screen.Cleanif it is clogged or
replaceif it is torn.
Check High Pressure Hose
High pressure hoses can developleaks from wear, kinking,
or abuse. Inspect hose beforeeach use. Checkfor cuts,
leaks,abrasions, bulging of cover, or damageor movement
of couplings. If any of these conditions exist, replacehose
immediately.
WARHIHG
The high pressure stream of water that this
_ quipment produces cancut through skin and itsunderlyingtissues, leadingto serious injury and
)ossible amputation.
, NEVERrepairhighpressurehose.Replaceit.
• ReplacementhoseratingMUSTexceedmaximumpressure
ratingof unit.
Check Gun and Hozzle Extension
Examinehose connectionto spray gun and makesure it is
secure.Testtrigger by pressing it and making sure it springs
back into placewhenyou releaseit. Do not depress red
button and test trigger. You should not be able to press
trigger. Replacespray gun immediately if it fails any of these
tests.
HozzJeMaintenance
A pulsing sensationfelt while squeezingthe spray gun trigger
may becaused by excessivepump pressure. Theprincipal
cause of excessivepump pressure is a nozzleclogged or
restricted with foreign materials, such asdirt, etc. Tocorrect
the problem, immediately cleanthe nozzlefollowing these
instructions:
1. Shut off engine and turn off water supply.
2. ALWAYSpoint spray gun in a safe direction, press red
button and and squeezespray gun trigger to release
retainedhigh water pressure.
WARNING
Thehigh pressure stream of water that this
equipment produces can cut through skin and its
,_ underlying tissues, leadingto serious injuryand
)ossible amputation.
Spraygun traps high water pressure, evenwhen
engine is stopped and water is disconnected,
which cancause injury.
• Keephighpressurehoseconnectedto pumpandspraygun
whilesystemispressurized.
, ALWAYSpointspraygunin safedirectionpressred buttonand
squeezesprayguntrigger,to releasehighpressure,everytime
youstopengine.
3. Removenozzlefrom end of nozzleextension.
4. Usea small paperclip to free any foreign material
clogging or restricting nozzle (A).
,
6.
Removenozzleextension from spray gun.
Using a garden hose, removeadditional debris by back
flushing water through nozzleextension. Backflush
between30 to 60 seconds.
,
8.
9.
10.
11.
Reinstallnozzleinto nozzleextension.
Reconnectnozzleextensionto spray gun.
Makesure garden hose is connectedto water inlet.
Checkthat high pressure hose is connectedto spray gun
and pump. Turn on water.
Start engine following instructions How to Start Your
Pressure Washer.
Test pressure washer by operating with eachquick
connect nozzle.
O-Ring Maintenance
Purchasean O-Ring RepairKit atyour local Searsor by
calling 1-800-4-MY-HOME(469-4663) or online at
www.sears.com. It is not included with the pressure washer.
This kit includes replacemento-rings, rubber washer and
water inlet filter. Referto the instruction sheet provided in the
kit to serviceyour unit's o-rings.
WARHIHG
Thehigh pressurestream of water that this
_ quipment produces cancut through skin and its
underlyingtissues, leadingto serious injury and
)ossible amputation.
• NEVERrepairleakingconnectionswith sealantof anykind.
Replaceo-ringor seal.
18
ENGINEMAINTENANCE
WARHJHG
f','_ Unintentionalsparking can result infire or
_¢ electric shock.
WHENADJUSTINGORMAKINGREPAIRSTOYOUR
PRESSUREWASHER
* Disconnectthesparkplugwirefromthesparkplugandplace
thewirewhereit cannotcontactsparkplug.
WHEHTESTJHGFOREHGJNESPARK
* Useapprovedsparkplugtester.
* DONOTcheckfor sparkwith sparkplugremoved.
Oil
OiJRecommendations
We recommendthe useof Briggs & Stratton Warranty
Certified oils for best performance. Other high-quality
detergent oils are acceptableif classified for service SF,SG,
SH, SJ or higher. Do not usespecial additives.
Outdoortemperatures determine the proper oil viscosity for
the engine. Usethe chart to selectthe best viscosity for the
outdoor temperature rangeexpected.
704 ..... .,,
* Below40°F(4°C)theuseofSAE30will resultin hardstarting.
** Above80°F(27°0)theuseof10W30maycauseincreasedoil
consumption.Checkoil levelmorefrequently.
NOTE:Synthetic oil meeting ILSACGF-2,API
certification mark and API servicesymbol with
"SJ/CF ENERGYCONSERVING"or higher, is an
acceptableoil at all temperatures. Useof synthetic oil
doesnot alter required oil change intervals.
CheckingOffLevel
Oil levelshould be checkedprior to each useor at least every
8 hours of operation. Keepoil level maintained.
1. Makesure pressure washer is on a levelsurface.
2. Removeoil dipstick and wipe dipstick with cleancloth.
Replaceand tighten dipstick. Removeand and check oil
level.
3. Verify oil is at "Full" mark on dipstick. Replaceand
tighten dipstick.
AddingEngineOff
1. Makesure pressure washer is on a levelsurface.
2. Checkoil level as described in CheckingOffLevel
3. If needed,slowly pour oil into oil fill openingto the
"Full" mark on dipstick. DONOToverfill.
NOTICE
Overfilling with oil may causethe engineto not start, or
hard starting.
DONOToverfill.
IfovertheFULLmarkon dipstick,drainoil to reduceoil levelto
FULLmarkon dipstick.
4. Replaceand tighten dipstick.
ChangingEngineOH
Changeengine oil afterthe first 5 hours and every 50 hours
thereafter. If you are using your pressure washer under
extremely dirty or dusty conditions, or in extremely hot
weather, changeoil more often.
CAUTION
Avoid prolonged or repeatedskin contact with used motor
oil.
Usedmotoroil hasbeenshownto causeskincancerin certain
laboratoryanimals.
Thoroughlywashexposedareaswith soapandwater.
KEEPOUTOFREACHOFCHILDREN.DON'T
POLLUTE.CONSERVERESOURCES.RETURN
USEDOILTOCOLLECTIONCENTERS.
19
Changeoil while engineisstiffwarmfromrunning,asfellows:
1. Drain fueltank by running pressure washer until fuel
tank is empty.
2. Disconnectspark plug wire and keepit away from spark
plug.
3. Cleanarea around oil fill, remove oil fill cap/dipstick.
Wipe dipstick clean.
4. Tipyour pressure washer to drain oil from oil fill into a
suitable container making sure you tip your unit away
from spark plug. When crankcaseis empty, return
pressure washer to upright position.
5. Slowly pour recommended oil (about 20 oz.) into oil fill
opening. Pauseto permit oil to settle. Fillto "Full" mark
on dipstick.
6. Wipe dipstick cleaneachtime oil levelis checked. DO
NOToverfill.
7. Replaceand tighten dipstick.
8. Wipe up any remaining oil.
9. Reconnectspark plug wire to spark plug.
Service Air Cleaner
Your enginewill not run properly and may be damagedif you
run it with a dirty air cleaner.
Servicethe air cleaneronce every 25 hours of operation or
once eachyear, whichever comes first. Service more often if
operating under dirty or dusty conditions. Replacementsare
availableatyour local Searsservicecenter.
Toservicetheair cleaner,follow thesesteps:
1. Loosentwo screws (A) and lift off cover (B).
2. Carefully removeair cleaner (C)from base(O).
3. Install clean (or new) air cleanerin base. Air cleaner
must fit securely in base.
4. Placecover over air cleanerand tighten screws.
NOTE:You can purchase newair filter elements by calling
1-800-4-MY-HOME(46g-4663).
ServiceSparkPlug
Servicethe spark plug every 100 hours of operation or
yearly, whichever occurs first.
1. Cleanareaaround spark plug.
2. Removeand inspect spark plug.
3. Replacespark plug if electrodesare pitted, burned or
porcelainis cracked. Usethe recommended replacement
plug. See Specifications.
4. Checkelectrode gap with wire feelergauge and set spark
plug gap to 0.020 inch (0.50 ram) if necessary.
5. Install spark plug and tighten firmly.
NOTE:You canpurchasea new spark plug bycalling
1-80O-4-MY-NOIViE(469-4663).
SparkArresterService
Your engine is not factory-equipped with a spark arrester, in
some areas,it is illegal to operatean engine without a spark
arrester. Checklocal laws and regulations. A spark arrester is
availablefrom your nearest Searsservicecenter. If you need
to order a spark arrestor, pleasecall 1-800-4-1VIY-HOME
(40g-4663).
Thespark arrester must be serviced every50 hours to keepit
functioning asdesigned.
If the engine hasbeen running, the muffler will be very hot.
Allow the muffler to cool before servicingthe spark arrester.
WARHIHG
_ Contact with muffler result in serious
area can
burns.
_ Exhaustheat/gases can ignite combustibles,
structures or damagefuel tank causing a fire.
* DONOTtouchhotpartsandAVOIDhotexhaustgases.
* Allowequipmenttocoolbeforetouching.
* Keepatleast5 feet(152cm) ofclearanceonall sidesof
pressurewasherincludingoverhead.
* Codeof FederalRegulation(CFR)Title36Parks,Forests,and
PublicPropertyrequireequipmentpoweredbyaninternal
combustionengineto haveasparkarrester,maintainedin
effectiveworkingorder,complyingto USDAForestservice
standard5100-1Cor laterrevision.IntheStateof Californiaa
sparkarresterisrequiredundersection4442oftheCalifornia
Publicresourcescode.Otherstatesmayhavesimilarlaws.
Removespark arresterscreenfor cleaningand inspection.
Replaceif screen is damaged.
2O
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/