AirShroud E-CAR COVER User manual

Brand: AirShroud

Model: E-CAR COVER

Type: User manual

E-CAR COVER

CONTENTS

Description of AirShroud 1

Important Safety Instructions 2

How to use AirShroud:

Charging the battery 3

Preparation of AirShroud 6

Covering your car 10

Uncovering your car 18

Maintenance 21

Troubleshoot/ FAQ 27

Protecting the Environment 31

Speciﬁcations 32

EC Declaration of Conformity 33

Warranty 34

USER

MANUAL

Updated v2.1

5/12/2017

Please read User Manual

carefully before using

AirShroud

Please keep User Manual,

rotary handle, bungee cord

and remote control in the

boot together with

AirShroud for your ease of

use

THANK YOU

A big, warm thank you for purchasing our product. We have

spent a considerable amount of time from designing to manu-

facturing the ﬁnal product, and we hope that you are as excited

as us when you start using it. Your car will love you for the care

and attention you are giving it by using AirShroud®, and you

will be relieved to see your car looking its best under whatever

weather and environmental conditions it is in.

Please read the user manual carefully beforehand so that you

know exactly what you need to do to get started. If you need any

help, please visit our website airshroud.co.uk for more informa-

tion regarding AirShroud where you can ﬁnd our video tutorials

as well as our contact details.

We hope that you can give us an honest review to share with

us and others, whether you are satisﬁed or not, as your opinion

means a lot to start-ups like us!

Thank you again.

From the AirShroud Team.

ACCESSORIES

1. Remote Control 2. Rotary Handle 3. Bungee Cord 4. Charger

3 4

DESCRIPTION OF AIRSHROUD

WHEN YOUR CAR IS COVERED

Intended use of AirShroud

This device is ONLY intended

to be used for covering your

car and protecting it from en-

vironmental hazards and the

elements.

Important Safety Instructions

Warning! When using bat-

tery-powered devices, basic

safety precautions, including

the following, should always be

followed to reduce the risk of

ﬁre, leaking batteries, personal

injury, and material damage.

• To prevent damage to

your AirShroud product or inju-

ry to yourself or others, read the

User Manual carefully before

using this equipment.

• The intended use is de-

scribed in this manual. The use

of any accessory or attachment

or the performance of any op-

eration with this appliance oth-

er than recommended in this

instruction manual may pres-

ent a risk of personal injury.

• Retain this manual for

future reference.

This icon marks warn

ings and information

that should be read

and paid special

attention to

STEP 1

Press and hold the two square but-

tons on the side of the battery com-

partment and simultaneously pull it

away from the main body to unlock

it.

STEP 2

Plug in the charger into your wall

socket and switch the power outlet

on.

STEP 3

Insert the power tip into the power

slot below the On/Off button on the

battery compartment.

HOW TO USE AIRSHROUD

CHARGING THE BATTERY

Warning! When attempting to unlock and remove the

battery compartment from the device outdoors, please

make sure that it is not raining or snowing. Otherwise,

there is a risk of excess moisture entering into the gaps

of the battery compartment and causing permanent

damage to the electronic components inside

the battery compartment

STEP 4

If the light on the charger shows

‘Red’, it means that it is currently

charging.

STEP 5

Please wait until the light on the

power adapter turns ‘Green’, which

means that the battery is fully

charged.

STEP 6

Once the battery is fully charged, remove the power tip from the

battery compartment.

STEP 7

Insert the battery compartment back into the main body. You

will know it’s fully locked in place when you hear a click sound

(the two square buttons will ﬁll out the holes).

HOW TO USE AIRSHROUD

CHARGING THE BATTERY

Attention! Safety Instructions for the battery compart

ment:

• Never attempt to open or disassemble for any

reason.

• Do not expose to external heat sources: direct,

prolonged sunlight; corrosive chemicals; and

moisture.

• Do not store in locations where the tempera-

ture may exceed 40

ADDITIONAL SAFETY INSTRUCTIONS: CHARGERS

Your charger has been designed for a speciﬁc voltage. Always

check that the mains voltage corresponds to the voltage on the

rating plate. Never attempt to replace the charger unit with a reg-

ular mains plug.

HOW TO USE AIRSHROUD

CHARGING THE BATTERY

Attention! Safety Instructions for the battery compart

ment:

• Charge only at ambient temperatures between

C and 40

• Charge only using the charger provided in the

box. Using the wrong charger could result in an

electric shock or overheat the battery.

Attention! The charger is intended for indoor use

only.

• Use your charger only to charge the battery in the

device with which it was supplied. Other batteries

could burst, causing personal injury and damage.

• Never attempt to charge non-rechargeable bat-

teries.

• If the supply cord is damaged, it must be re

placed by the manufacturer in order to avoid a

hazard.

• Do not expose the charger to water.

• Do not open the charger.

• Do not probe the charger.

• The device/battery must be placed in a well-venti

lated area when charging.

SYMBOLS ON THE CHARGER

Your charger is double insulated; therefore no earth wire

is required.

Separate collection. Your charger must not be disposed

of with normal household waste.

STEP 1

SALOON & COUPÉ

Open the trunk lid of your car to re-

veal the boot.

SUV

Open the trunk lid of your car to re-

veal the boot.

PREPARATION OF AIRSHROUD: ADJUSTMENT OF STRAP

You will only need to do this once in order to make sure that

your AirShroud device is fully adjusted to match the car you are

using.

HOW TO USE AIRSHROUD

PREPARATION OF AIRSHROUD

STEP 2

Place AirShroud into the boot. Make

sure that the battery compartment

(the side with the On/Off button) is

facing to the left.

STEP 5

SALOON & COUPÉ

Hook the adjustable straps to a hole

of your choice, or bar.

SUV

In the boot, ﬁnd somewhere stable

and secure to hook the adjustable

straps in place. (This could be small

handle bars at the back or base of

the rear seat, or at the side of the

boot. Or the bar of the back seat

head-rest.)

STEP 4

SALOON & COUPÉ

On the upper side of the inner boot,

you will be able to see a number of

large holes as shown in this example,

or a horizontal bar.

SUV

Proceed to STEP 5

STEP 3

There is a pair of small hooks attached to an adjustable strap and

buckle behind the device on the left and right side.

HOW TO USE AIRSHROUD

PREPARATION OF AIRSHROUD

STEP 6

Adjust the length of the strap by sliding the buckle up or down

and pulling the strap.

STEP 7

The aim is to adjust the strap to the

right length, so that the device sus-

pends horizontally and ﬁrmly out-

side the lower rim of the boot, with

its sponge leg resting on the side of

the car.

Attention! Make sure that when you adjust the buckle,

the buckle is positioned closer towards the inside of the

boot to avoid damage to the buckle when you close the

trunk lid shut.

HOW TO USE AIRSHROUD

PREPARATION OF AIRSHROUD

Attention! When adjusting the length of the strap,

please do it while the device is resting inside the boot

and not suspended on the side of your car.

STEP 8

Once this is done, and assuming that the battery power is fully

charged, the device is now fully prepared for use.

STEP 9

If you do not intend to use it right now, then place the device

back into the trunk. You can leave the hooks attached. But if you

choose to unhook it, please remember the general locations

where you have attached the hooks to, in order to save you time

ﬁnding the right places to hook to.

Attention! Make sure that the hooks are ﬁrmly hooked

before you try to suspend the device outside to avoid

it from falling and causing injury to your feet, as well as

causing damage to the device.

Also please do not use force to tug the strap away from

the device or try to deadlift the device up by pulling the

strap as it might break the joint and cause injury to

yourself.

Attention! Remember to close the trunk lid and lock

the car.

ADDITIONAL ADVICE

Please keep this user manual, the rotary handle, bungee cord,

and spare remote control safely inside your boot along with

AirShroud just in case.

HOW TO USE AIRSHROUD

PREPARATION OF AIRSHROUD

STEP 1

Open the trunk lid at the rear of the car. (If AirShroud is not cur-

rently stored inside the trunk, place it inside now with the battery

compartment facing towards the left.)

STEP 2

Make sure that the adjustable straps are properly hooked in place.

STEP 3

Move the device outwards so that

it suspends horizontally and ﬁrmly

outside the lower rim of the trunk,

with its sponge legs resting on the

side of the car.

HOW TO USE AIRSHROUD

PREPARATION OF AIRSHROUD

Before you cover your car, make sure that your car is relatively

clean. Remove any large organic material like twigs, nuts, leaves;

large pieces of dirt/dust; dried up bird droppings to avoid it

scratching on the surface of your car and also contaminate the

inside of the car cover when operating AirShroud.

The following assumes that you have already prepared your

device for your car. If you had not yet done so, please read the

‘Preparation of AirShroud’ section.

Attention! Make sure that the hooks are ﬁrmly hooked

before you try to suspend the device outside to avoid

it from falling and causing injury to your feet, as well as

causing damage to the device.

HOW TO USE AIRSHROUD

COVERING YOUR CAR

STEP 4

Close the trunk lid shut.

STEP 5

Press the On/Off button located on

the battery compartment to switch

the device on. When the device is on,

the power indicator lights will be on,

and there will be a beeping sound.

Closely monitor the power indicator.

If power is low, please recharge ﬁrst.

STEP 6

Slide the lid open to reveal the car cover inside the device.

Attention! If AirShroud is low on power after covering

your car, you can remove the battery compartment,

and recharge it indoors. If you do so, please do it when

weather conditions are dry. Also please keep small

children away from the device whilst it is operating to

avoid causing injury and harm.

HOW TO USE AIRSHROUD

COVERING YOUR CAR

STEP 7

Use your right hand to grip the han-

dle, and your left hand to hold the

remote control.

STEP 8

Press and hold the ‘Cover’ but-

ton on the remote control. Move

along the left side of the car towards

the front, whilst pulling the car cov-

er over the top of your car using the

handle rod as a guide.

Attention! If you accidentally pressed the ‘Uncov-

er’ button instead (which would cause the handle rod

to be pulled into the device), release the button imedi-

ately. Then press the ‘Cover’ button and resume as

normal.

Attention! You have to physically pull the cover over your

car using the handle rod as a guide. Pressing the

‘Cover’ button does not cause the car cover to cover your

car automatically, but just unlocks the car cover from

the device so you are able to pull it out.

HOW TO USE AIRSHROUD

COVERING YOUR CAR

STEP 9

Let go of the ‘Cover’ button once the front of the car cover

has reached the full length of the car.

STEP 10

Shorten the length of the handle rod.

STEP 13

Turn off the device and open the trunk lid

STEP 11

Tuck the elasticated hems around

the front two corners of the car.

STEP 12

Return to the rear of the car, press

the ‘Cover’ button on the re-

mote control and pull the cover out

of the device to incrementally re-

lease more of the car cover from the

device, and place the cover on top of

the trunk lid.

HOW TO USE AIRSHROUD

COVERING YOUR CAR

Attention! If you have purchased a tailored car cover,

please cover up the side-mirrors ﬁrst before tucking in

the elasticated hems at the front of the car. Otherwise,

the stretched fabric would make it hard to cover. The

side-mirrors should be folded.

STEP 14

Place the device back inside the

boot.

STEP 15

Close the trunk lid.

STEP 16

Stretch out the remaining cover

along the back of the car so that the

elasticated hems ﬁt tightly around

the back corners of the car.

Attention! Remember to lock your car after using Air

Shroud.

Attention! If the device turns itself off during normal

operation, please read page 28 ‘Troubleshoot/ FAQ’ sec

tion

HOW TO USE AIRSHROUD

COVERING YOUR CAR

ADDITIONAL INFORMATION FOR COVERING YOUR CAR IN

CERTAIN SITUATIONS: FOR THE ANTICIPATION OF WINDY

WEATHER CONDITIONS

If you have already covered your car, and you anticipate that the

weather will become windy, please read the following instruc-

tions:

STEP 1

At the grey side (back) of the car cov-

er where your car wheels are located,

there is a large pocket that contains

a long side-release buckle strap.

STEP 2

Open the pocket and take out the

side-release buckle strap.

STEP 3

Loop the strap with the fork end

around the car frame and lock it

with the side-release buckle.

HOW TO USE AIRSHROUD

COVERING YOUR CAR

STEP 4

You can then tighten the side-re-

lease buckle strap to ensure that the

car cover will stay in place and will

not ﬂap about even if weather con-

ditions are windy.

FOR THE ANTICIPATION OF EXTREME WINDY WEATHER CON-

DITIONS

If you had locked the side-release buckles to the four car wheels,

it should be enough to keep the cover from being blown away

and stabilized. But exceptionally strong winds can still get into

the middle section of the cover and cause the car cover to puff

up, as well as blowing any dust, dirt and leaves into the cover. To

prevent this from happening and to ensure additional safety, we

advise you to use the bungee cord provided in the box. Below is

a set of instructions on how to use your bungee cord.

STEP 1

Once you have covered your car, move to one side of the car and

look for a small loop on the middle-bottom edge of the cover.

STEP 2

Hook the bungee cord to the loop.

HOW TO USE AIRSHROUD

COVERING YOUR CAR

STEP 5

Once you have covered your car, move to one side of the car and

look for a small loop on the middle-bottom edge of the cover.

STEP 3

Open the metal lock and adjust the

length of the bungee cord so that

it’s just a bit longer than the width

of the car.

STEP 6

Hook the bungee cord to the loop.

STEP 4

Then close the metal lock with the

thumb pressed ﬁrmly on the lock,

and with the other hand give the

bungee cord a small tug to stretch

it. This ensures that the lock is ﬁrm-

ly pressed on the cord so that the

length is ﬁxed.

Attention! If you are trying to tie the bungee cord to the

car cover near the road, please be careful of passing cars

for your personal health and safety.

HOW TO USE AIRSHROUD

COVERING YOUR CAR

Page is loading ...

AirShroud E-CAR COVER User manual

Brand: AirShroud

Model: E-CAR COVER

Type: User manual

Download PDF

report

AirShroud E-CAR COVER User manual

AirShroud E-CAR COVER User manual

Other documents