Ambisonic Systems LLC 1990 N. McCulloch Blvd. Ste. D 222 Lake Havasu City, AZ 86403 Voice: 928.733.6002 Fax: 928.453.5550
[email protected] www.ambisonicsystems.com
Owner’s Manual
(patent pending)
Intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
Intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
CAUTION: Risk of electrical shock — DO NOT OPEN!
CAUTION: To reduce the risk of electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.
Do not install near any heat sources such as radiators, heat registers or other apparatus (including amplifiers) that produce heat. Only use attachments/
accessories specified by the manufacturer. The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.
ATTENTION: Risques de choc électrique — NE PAS OUVRIR!
ATTENTION:
Ce symbole est utilisé dans ce manuel pour indiquer à l’utilisateur la présence d’une tension dangereuse pouvant être d’amplitude suffisante pour
constituer un risque de choc électrique.
Ce symbole est utilisé dans ce manuel pour indiquer à l’utilisateur qu’il ou qu’elle trouvera d’importantes
instructions concernant l’utilisation et l’entretien de l’appareil dans le paragraphe signalé.
Afin de réduire le risque de choc électrique, ne pas enlever le couvercle. Il ne se trouve à l’intérieur aucune pièce pouvant être
reparée par l’utilisateur. Confiez I’entretien et la réparation de l’appareil à un réparateur agréé.
Ne pas installer à proximité de sources de chaleur telles que des radiateurs, des bouches de chaleur, des poêles ou tout autre appareil (y compris les
amplificateurs) produisant de la chaleur. Utilisez uniquement les périphériques/ accessoires spécifiés par le fabricant.La prise de courant est utilisée
comme dispositif de déconnexion, le dispositif de déconnexion doit rester facilement accessible.
1) Lisez et suivez toutes les instructions.
2) Tenez compte de tous les avertissements.
3) Ne bloquez pas les ouvertures de ventilation. Installez conformément aux instructions du fabricant.
4) Ne tentez pas de modifier les dispositifs de sécurité que constituent les fiches de type terre ou polarisées.
Une prise polarisée est composée de deux fiches dont l'une est plus large que l'autre. Une fiche de terre
comporte deux lames et une troisième broche de mise à la terre. La lame la plus large ou la troisième
broche assure la sécurité de l'utilisateur. Si la fiche secteur fournie avec l'appareil ne correspond pas à
la prise secteur de votre installation, faites remplacer cette dernière par un électricien.
5) Vérifier que le câble n'est pas pincé ou plié excessivement.
6) Débranchez cet appareil pendant les orages ou au cours des longues périodes de non utilisation.
7) L'entretien de l'appareil doit être effectué par un personnel de service qualifié. Des réparations sont
nécessaires si l'appareil est endommagé.
8) Pour déconnecter complètement l'alimentation électrique, il est nécessaire de débrancher l'appareil
de la prise murale
1) Read and follow all instructions.
2) Heed all warnings.
3) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
4) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
5) Protect the power cord from being bent or pinched.
6) Unplug this apparatus during lightning storms or when unused for long periods of time.
7) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged.
8) Use the mains plug to disconnect the apparatus from the mains.
Important Safety Instructions
The “L-240 Stereo Amplier” is designed for use at multiple locations. Take it with you anywhere
you need quality audio. Take it to the pool area or entertainment space, or take it to your new summer home.
(Not intended for permanent installation)
1) For mounting of the “L-240 Stereo Amplier”, place the enclosure onto a solid vertical surface,
(interior wall, exterior wall, fence or other vertical surface that does not recieve total direct sunlight.
Place a screw at the proper location to except the keyhole slot in the mounting bracket.
Hang the “L-240 Stereo Amplier” onto the screw.
2) Before any connections, make sure the amplier is not plugged into an electrical outlet and that the power
switch is in the OFF position.
3) Connections: Strip approximately 3/8” to 1/2” of the insulation o of each 12ga. speaker wire.
4) Push the bare wires under the terminal screws on the terminal blocks and tighten the screws securely.
Remember polarity is important. Positive output from the “L-240 Stereo Amplier”, to the positive input
of the speaker and negative output from the “L-240 Stereo Amplier”, to negative input of the speaker.
5) Connect the speaker outputs from the “L-240 Stereo Amplier”, to the speakers.
6) Plug “L-240 Stereo Amplier”, into 120VAC electrical outlet and turn the power switch to the ON position.
Close and lock the door to ensure your safety and to create a weather tight seal.
Installation Instructions
Portable Indoor/Outdoor WiFi Amplier
THE “L-240 Stereo Amplier” MUST BE MOUNTED AT LEAST ONE FOOT ABOVE GROUND LEVEL,
WITH A MINIMUM OF THREE (3) FEET CLEARENCE AROUND THE UNIT FOR PROPER VENTILATION.
120VAC
120 VAC Input
Mounting Bracket
Speaker Output Terminal Screws
Outputs
LEFT RIGHT
Bluetooth Antenna
WiFi Antenna (2)
o
I
Power On/O
BT
WiFi
L-Clip
R-Clip
Power
LED Indicators
- + + -
Speaker Outputs
Weather Proof Enclosure
L-240 Stereo Amplier
Ambisonic Systems,LLC
CONFORMS TO UL STD 1838
CERTIFIED TO CSA STD C22.2 NO.250.7
Ambisonic
L-240 Stereo Amplier
MODEL: L-240
INPUT : 100 - 240V AC
50-60Hz
75W
OUTPUT : 240W/4ohms
50 04 938
Index
Page 3: Introduction
Pages 4-8: Quick Start (No Network Connection)
Pages 9-10: Network Settings
Pages 10-18: Connecting the Ambisonic L-240 to the Network
Pages 19-20: Configuring Network Settings
Introduction
AmbiSonic’s L-240 All-Weather Outdoor WiFi Amplifier stands
apart from all others. It is the world’s first dedicated outdoor
amplifier. Not only does it deliver sparkling, audiophile
performance, it’s also weatherized to withstand harshest outdoor
conditions (IP-65 outdoor rated).
The L-240 WiFi Receiver can be programmed either as a WAP
(Wireless Access Point) or as a Wireless Extender, allowing it to
transmit an internet connection.*
Normal amplifiers must be placed indoors for a variety of reasons,
including susceptibility to moisture, and the need for open venting
in order to dissipate heat.
AmbiSonic’s L-240 is uniquely designed to function in harsh
outdoor conditions. Rather than installing your amplifier indoors,
and running speaker-wires outside through walls or ceilings, you
simply mount the L-240 amplifier outside on any surface near an
outdoor power outlet. Speaker wires may then be run from the L-
240’s outdoor location to the speakers with minimum effort.
*Requires an existing on-site internet connection.
Quick Start (No Network Connection)
In this section we’ll learn how to utilize the L-240 amplifier in
situations where you don’t have an active network connection, yet
still wish to listen to your favorite music.
Method 1: Bluetooth
If you are in an area with no internet connection and no cellular,
you can still connect to the amplifier through Bluetooth, and
transmit your locally stored music to the L-240.
Bluetooth does not provide as high resolution audio quality as Wi-
Fi. Therefore, we only recommend a Bluetooth connection if
there is no network connection at all.
When connecting with Bluetooth, your device will naturally start
transmitting audio to the amplifier without any extra steps. Simply
access your Bluetooth settings in your device, and connect to the
Ambisonic L-240. Connecting via Bluetooth allows you play locally
stored files, or to stream your favorite music through music
streaming services if you have a active cellular service.
Method 2: Apple AirPlay
TM
(Apple Devices)
If you’re in a location where an existing network is not available,
you can connect your Apple device (iPhone, iPod, iPad), to the
amplifier’s own wireless network, via Apple AirPlay
TM
. This option
requires that you have locally stored music on your Apple device.
Once connected to the L-240’s Wi-Fi network, switch your Apple
device to AirPlay
TM
audio output. Now, your locally stored music
will begin to play through the amplifier’s speakers.
When using this method you’ll enjoy the highest quality of sound.
Data can be sent to the amplifier in higher volumes through Wi-Fi
than through Bluetooth.
Please note if you do not store music locally, many music
steaming applications on your devices allow you to download an
“offline” version of the song or album, so you can listen even
when there’s no access to internet.
Once you have offline versions of your music, simply open the
music streaming application and begin playing through Apple
AirPlay
Method 3: Samsung SmartThings
TM
or BubbleUPnP
TM
(For
Android Devices)
If you have an Android device, and no network access, you can
still transmit locally stored music files on your phone, via Wi-Fi to
the L-240. Remember, a Wi-Fi connection to the L-240 provides
better audio quality than Bluetooth.
Samsung SmartThings
TM
: If your android device supports
Samsung SmartThings
TM
, you’ll be able to select the AmbiSonic
L-240 amplifier as an audio source.
If you currently do not have Samsung SmartThings
TM
on your
Android device, search for this app in the Google Play Store. If
your device is compatible, you’ll be able to install the app.
Once installed, open Samsung SmartThings
TM
and select “Add
Device”.
Please note: You must be connected to AmbiSonic’s L-240
wireless network in order for Samsung SmartThings
TM
to detect
the Ambisonic L-240 as a wireless speaker system.
Once Samsung SmartThings
TM
has found the device, simply
select it and the L-240 will begin functioning as an audio output.
If your Android device fails to automatically switch to the amplifier,
pull down from the top of your screen and you should now see a
section for Samsung SmartThings
TM
in your “Notifications” area.
You may then select the desired output, the internal speaker(s) on
your device, or the AmbiSonic L-240.
BubbleUPnp
TM
: If your Android device does not support
Samsung SmartThings
TM
, you can download a 3
rd
party
application called “BubbleUPnP
TM
”, which allows you to connect
your device to AmbiSonic’s L-240, and stream your locally stored
music to the amplifier via Wi-Fi.
Please note: An upgraded license of “BubbleUPnP
TM
” is required
in order to transmit wirelessly (Wi-Fi) to the L-240. Once the
upgrade has been purchased, you’ll be able to select the L-240 as
an audio device.
If you have an Android device, and your L-240 is located beyond
the range of any Wi-Fi networks, it’s best to load your music into
your Google Play Music library (requires an active internet
connection).
Once your music is loaded into Google Play Music Library, you
can transmit your music via Wi-Fi to the L-240 with the highest
audio quality – even when no internet connection exists.
BubbleUPnP
TM
also supports Tidal Music as well and should
support additional music streaming services in the future.
Network Settings
In this next section will cover the two different ways to connect the
AmbiSonic L-240 to the internet, permitting the L-240 to broadcast
a wireless internet signal.
Method 1: Wired (Ethernet)
To ensure the absolute best connection to the existing networks,
the AmbiSonic L-240 Wi-Fi Amplifier should be directly connected
via an Ethernet cable to a Modem, Router or Switch that already
has internet access. This “hardwired” connection provides the L-
240 amplifier with 100% signal strength, when broadcasting Wi-Fi
to other devices.
Method 2: Wireless (Wi-Fi)
In some cases, a wired Ethernet connection to the L-240 is not
feasible or aesthetically desirable. If hard-wired Ethernet is not a
viable option, the L-240 amplifier can be attached to existing
networks via Wi-Fi, provided the L-240’s location is within wireless
range of the network.
When the amplifier attaches to a network via a wireless
connection, it heavily relies upon the Wi-Fi range of the existing
network.
If the existing network Router’s wireless signal cannot reach the
AmbiSonic L-240’s location, another wireless access point or
extender can be installed between the two devices, in order to
connect them.
Connecting the Ambisonic L-240 to the Network
LAN Connection (Best/Recommended)
If possible, it’s best to make a direct connection to your network
via a Cat5e or Cat6 cable. This provides the most stable and
reliable network connection to the amplifier.
1. Insert one end of your Cat5e or Cat6 Cable into the LAN port
located inside of the AmbiSonic L-240. Plug the remaining
end into your Router directly, if you have no open ports on
your Router a Network Switch may be necessary to
complete the task.
2. Once the connection has been made, we recommended you
turn the L-240 on and off once to allow it to properly
configure its new internet settings.
3. It may also necessary to turn your router on and off once in
order to allow it to properly configure the new settings.
4. After your router and L-240 have been power cycled, you
should connect to the network and be ready to stream your
favorite music.
Once you have created this connection to an existing network,
you’ll be able to either play music files locally stored on your
device, or stream music from your music streaming service.
Apple Devices
In order to stream music using an Apple iOS device, you’ll need to
access the “Command Center” (first ensure you have latest iOS
update).
You can access the Command Center through one of the
following steps:
1. iPhone X: Pulling down from the upper right hand side on the
screen,
2. Any other iPhone/iPad: Pulling up from the bottom of your
screen.
Once the Command Center is visible, select the “Music Play” icon
– in the upper right. This will reveal the available devices you can
access via Apple Air Play
TM
. Select “Ambisonic L-240”.
Once your AmbiSonic L-240 Indoor/Outdoor Wireless Amplifier
has been properly connected to the network, you’ll be able to
stream music through your favorite streaming service, or music
stored locally on your Apple device.
Android Devices (SmartThings
TM
/Best Way)
If your Android device supports Samsung SmartThings
TM
, simply
pull down from the top of your screen to display the “Notification
Center”. If the AmbiSonic L-240 is not already activated, select
“Audio Output”, and then select “AmbiSonic L-240” from the drop-
down menu.
Once your AmbiSonic L-240 Indoor/Outdoor Wireless Amplifier
has been properly connected to the network, you’ll be able to
stream music through your favorite streaming service, or music
stored locally on your Android device.
Android Devices (BubbleUPnP)
If your Android device does not support Samsung SmartThings
TM
,
you can still connect to the L-240 by downloading 3
rd
pary
softward called “BubbleUPnp
TM
” from the Google Play Store.
Note: Even when connected to an exiting Wi-Fi network, Android
devices which do not support SmartThings
TM
are not capable of
streaming music from a music streaming service to the L-240.
When utilizing an Android device with BubbleUPnp
TM
, you are
limited to utilizing locally stored music files.
Ensure that Wi-Fi has been enabled on your Android device.
Provided the AmbiSonic L-240 has been connected to the
network, you’ll now be able to select the L-240 and wirelessly
stream your locally stored music content.
Once you’ve installed BubbleUPnp
TM
, open the application and
select the “More” icon. Next, select the “Cast” icon shown the
image on the left. You’ll now see a list of local devices you may
select in order to stream locally stored music content.
Ensure that Wi-Fi has been enabled on your Android device.
Provided the AmbiSonic L-240 has been connected to the
network, you’ll now be able to select the L-240 and wirelessly
stream your locally stored music content.
Wireless LAN Connection (Normal)
If running an Ethernet cable to the L-240 is not possible or
convenient, you can still connect wirelessly to an existing network.
Please follow the following steps to connect your device to your
Wi-Fi network.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/