NIKKO CVTTP7770 User manual

1/24 RADIO CONTROL CAR1/24 RADIO CONTROL CAR

1/24 RADIO CONTROL CAR

Owner's ManualOwner's Manual

Owner's Manual

Please read carefully before starting to operate.Please read carefully before starting to operate.

Please read carefully before starting to operate.

Warning! use under the direct supervision of an adult.Warning! use under the direct supervision of an adult.

Warning! use under the direct supervision of an adult.

KEEP THE DISPLAYBOX AND THE MANUAL FOR FUTURE REFERENCE.KEEP THE DISPLAYBOX AND THE MANUAL FOR FUTURE REFERENCE.

KEEP THE DISPLAYBOX AND THE MANUAL FOR FUTURE REFERENCE.

You can enjoy various driving by using optional parts sold separately. You can enjoy various driving by using optional parts sold separately.

You can enjoy various driving by using optional parts sold separately.

(Refer to the(Refer to the

(Refer to the

manual for optional parts.)manual for optional parts.)

manual for optional parts.)

Repair and Parts DepartmentRepair and Parts Department

Repair and Parts Department

Monday to Friday 8:30AM-5:30PMMonday to Friday 8:30AM-5:30PM

Monday to Friday 8:30AM-5:30PM

Central TimeCentral Time

Central Time

Repair:(800)736-4556

Parts:(800)776-4556

Fax:(972)578-7059

e-mail:[email protected]

ATTENTION PARENTSATTENTION PARENTS

ATTENTION PARENTS

It is recommended that this toy andIt is recommended that this toy and

It is recommended that this toy and

all accessories be periodically exam-all accessories be periodically exam-

all accessories be periodically exam-

ined for potential hazards and thatined for potential hazards and that

ined for potential hazards and that

any potentially hazardous parts beany potentially hazardous parts be

any potentially hazardous parts be

repaired or replaced.repaired or replaced.

repaired or replaced.

How to install transmitter antennaHow to install transmitter antenna

How to install transmitter antenna

Place the transmitter antenna into the antenna holder and screw it in clockwise.Place the transmitter antenna into the antenna holder and screw it in clockwise.

Place the transmitter antenna into the antenna holder and screw it in clockwise.

Do not install the antenna extended.Do not install the antenna extended.

Do not install the antenna extended.

If the antenna is not screwed in securely, the vehicle may not move atIf the antenna is not screwed in securely, the vehicle may not move at

If the antenna is not screwed in securely, the vehicle may not move at

your control. Screw the antenna securely.your control. Screw the antenna securely.

your control. Screw the antenna securely.

BATTERY REQUIREMENTSBATTERY REQUIREMENTS

BATTERY REQUIREMENTS

Transmitter: 1 x 9 V (6F22)battery

Vehicle: 3x AA alkaline (1.5V) or Ni-Cd(1.2V)batteries

Remove two screws on the bottom side of the board with a phillips screwdriver as

shown in a figure, and remove the car from the board.

Be careful not lose plastic parts and screws.

HOW TO REMOVE THE CARHOW TO REMOVE THE CAR

HOW TO REMOVE THE CAR

Screw

Phillips screwdriver(not included in the kit).

One 6F22(9V) battery

ON/OFF switch

3 MAJOR CAUSES OF VEHICLE MALFUNCTION

*WEAK BATTERIES

*INCORRECT BATTERY INSTALLATION

*INTERFERENCE

Steering alignment lever

When you remove the battery compartment cover, press a removing button usingWhen you remove the battery compartment cover, press a removing button using

When you remove the battery compartment cover, press a removing button using

a ballpoint or a pencil with a sharp point, then slide the cover.a ballpoint or a pencil with a sharp point, then slide the cover.

a ballpoint or a pencil with a sharp point, then slide the cover.

Slide the cover backward by a finger and remove the cover.Slide the cover backward by a finger and remove the cover.

Slide the cover backward by a finger and remove the cover.

When you open the cover, be careful not to break a lead.When you open the cover, be careful not to break a lead.

When you open the cover, be careful not to break a lead.

A ballpoint or a pencil.A ballpoint or a pencil.

A ballpoint or a pencil.

PushPush

Push

TO OPEN THE BATTERY COMPARTMENT LIDTO OPEN THE BATTERY COMPARTMENT LID

TO OPEN THE BATTERY COMPARTMENT LID

Removing buttonRemoving button

Removing button

VEHICLEVEHICLE

VEHICLE

TRANSMITTERTRANSMITTER

TRANSMITTER

Check to see that the battery is INSTALLED in the CORRECT position.Check to see that the battery is INSTALLED in the CORRECT position.

Check to see that the battery is INSTALLED in the CORRECT position.

3x AA alkaline (1.5V) or Ni-Cd(1.2V)batteries

BATTERY INSTALLATIONBATTERY INSTALLATION

BATTERY INSTALLATION

Install battery making sure that + and - poles of the battery are positioned properly.

Make sure vehicle’s on-off switch is turned OFF when installing battery.

Remove all the batteries from the vehicle and the transmitter after playing.

CAUTION WHEN USING BATTERIESCAUTION WHEN USING BATTERIES

CAUTION WHEN USING BATTERIES

Avoid combined use of new dry battries and old ones.

Avoid combined use of Ni-Cd batteries and dry batteries.

Avoid combined use of charged Ni-Cd batteries and discharged Ni-Cd batterries.

ANTI-POWER LOSS TRANSMITTER

(To prevent unnecessary power loss)

The transmitter power is automatically turned ON

when the speed control stick is operated either to the

forward running or reverse running positions. When

the stick is returned to the neutral position, the trans-

mitter power is turned OFF. When the transmitter

power is turned OFF, the vehicle can be jammed by

other transceiver radio waves and start to move ab-

normally.

TransmitterTransmitter

Transmitter

LEFT / STRAIGHT / RIGHT

FORWARD

BACKWARD

Antenna

Steering control wheel

Speed Control Push Button

VehicleVehicle

Vehicle

When the vehicle slows down or starts moving errati-

cally, replace all the vehicle's batteries with fresh

ones.

You can control the vehicle at a longer distance by

holding the transmitter higher with the antenna

straight up.

NOTE:NOTE:

NOTE:

STOPSTOP

STOP

TO ADJUST STEERING ALIGNMENT TO ADJUST STEERING ALIGNMENT

TO ADJUST STEERING ALIGNMENT

Adjust the steering alignment lever on

the underside of the vehicle when the

vehicle does not run straight.

Steering alignment lever

HOW TO PLAYHOW TO PLAY

HOW TO PLAY

1. Turn ON the vehicle.

2.•Operate the vehicle with transmitter.

3. Turn OFF the vehicle after operating.

4. Remove all the batteries both from the vehicle and

the transmitter.

* Please follow the above sequence of operation.* Please follow the above sequence of operation.

* Please follow the above sequence of operation.

ON/OFF

switch

Check the batteries regularly for leakage.Check the batteries regularly for leakage.

Check the batteries regularly for leakage.



Remove empty batteries from the toy.Remove empty batteries from the toy.

Remove empty batteries from the toy.

Never try to charge non-rechargeable batteries.Never try to charge non-rechargeable batteries.

Never try to charge non-rechargeable batteries.

Never short-circuit the terminals.Never short-circuit the terminals.

Never short-circuit the terminals.



CAUTION:CAUTION:

CAUTION:

Keep out of reach of small children under 36 months old as there is danger of getting

hurt.

This toy vehicle needs periodic maintenance and cleaning.

Cleaning and maintenance:Cleaning and maintenance:

Cleaning and maintenance:

OPERATING SAFETY RULESOPERATING SAFETY RULES

OPERATING SAFETY RULES

Select a

SAFESAFE

SAFE place to operate your vehicle. Do not drive in the street. Avoid driving on

SANDSAND

SAND or through puddles of

WATERWATER

WATER. These hazards can impair performance. Check

the surface ahead of you and watch for obstacles. The radio receiver in your vehicle and

transmitter are sensitive instruments. Do not leave Vehicle or Transmitter near sources of

HEATHEAT

HEAT or under

DIRECT SUNLIGHTDIRECT SUNLIGHT

DIRECT SUNLIGHT for long periods of time.

Avoid leaving Vehicle or Transmitter

OUTSIDE OVERNIGHTOUTSIDE OVERNIGHT

OUTSIDE OVERNIGHT.

NIGHT DAMPNESS IS HARMFULNIGHT DAMPNESS IS HARMFUL

NIGHT DAMPNESS IS HARMFUL to

INTERIOR MECHANISMINTERIOR MECHANISM

INTERIOR MECHANISM.

DO NOT try to take apart or remodel any of the parts.DO NOT try to take apart or remodel any of the parts.

DO NOT try to take apart or remodel any of the parts.

RADIO INTERFERENCERADIO INTERFERENCE

RADIO INTERFERENCE: Sometimes erratic behavior or loss of control of vehicle is

the result of interference caused by high tension wires, high voltage transformers

certain types of building, concrete walls or narrow places where

RADIO SIGNALSRADIO SIGNALS

RADIO SIGNALS

sent from your transmitter

MAY BE SCATTEREDMAY BE SCATTERED

MAY BE SCATTERED thus making it

DIFFICULTDIFFICULT

DIFFICULT for your

vehicle to receive a

GOOD RADIO SIGNALGOOD RADIO SIGNAL

GOOD RADIO SIGNAL. If you encounter this type of behavior or

loss of control,

CHANGE TO A DIFFERENT LOCATIONCHANGE TO A DIFFERENT LOCATION

CHANGE TO A DIFFERENT LOCATION.

You will encounter

INTERFERENCEINTERFERENCE

INTERFERENCE if

ANOTHERANOTHER

ANOTHER radio controlled vehicle or

CBCB

radio is operating in the vicinity on your

SAME FREQUENCYSAME FREQUENCY

SAME FREQUENCY.

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THECHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE

MANUFACTURER FOR COMPLIANCE COULD VOID THE USER’S AUTHOR-MANUFACTURER FOR COMPLIANCE COULD VOID THE USER’S AUTHOR-

MANUFACTURER FOR COMPLIANCE COULD VOID THE USER’S AUTHOR-

ITY TO OPERATE THE EQUIPMENT.ITY TO OPERATE THE EQUIPMENT.

ITY TO OPERATE THE EQUIPMENT.

THE FCC WANTS YOU KNOWTHE FCC WANTS YOU KNOW

THE FCC WANTS YOU KNOW

This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions:This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions:

This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions:

(1)This device may not cause harmful interference.(1)This device may not cause harmful interference.

(1)This device may not cause harmful interference.

(2)This device must accept any interference received,including interference that may cause undesired opera-(2)This device must accept any interference received,including interference that may cause undesired opera-

(2)This device must accept any interference received,including interference that may cause undesired opera-

tion.tion.

tion.

Your R/C car might cause TV or radio interference even when it is operating properly.Your R/C car might cause TV or radio interference even when it is operating properly.

Your R/C car might cause TV or radio interference even when it is operating properly.

To determine whether your R/C car is causing the interference, turn off your R/C car.To determine whether your R/C car is causing the interference, turn off your R/C car.

To determine whether your R/C car is causing the interference, turn off your R/C car.

If the interference goes away,your R/C car is causing the interference.If the interference goes away,your R/C car is causing the interference.

If the interference goes away,your R/C car is causing the interference.

Try to eliminate the interference by:Try to eliminate the interference by:

Try to eliminate the interference by:

Moving your R/C car away from the receiver.Moving your R/C car away from the receiver.

Moving your R/C car away from the receiver.

Contacting your local store for help.Contacting your local store for help.

Contacting your local store for help.

If you cannot eliminate the interference, the FCC requires that you stop using your R/C car.If you cannot eliminate the interference, the FCC requires that you stop using your R/C car.

If you cannot eliminate the interference, the FCC requires that you stop using your R/C car.

THE RBRCTHE RBRC

THE RBRC

TMTM

Seal on the nickel cadmium battery packSeal on the nickel cadmium battery pack

Seal on the nickel cadmium battery pack

indicates that NikkoAmerica is voluntarily participating in an industry program to collectindicates that NikkoAmerica is voluntarily participating in an industry program to collect

indicates that NikkoAmerica is voluntarily participating in an industry program to collect

and recycle these batteries at the end of their useful life. The RBRC program providesand recycle these batteries at the end of their useful life. The RBRC program provides

and recycle these batteries at the end of their useful life. The RBRC program provides

a convenient alternative to disposing nickel-cadmium batteries into the trash ora convenient alternative to disposing nickel-cadmium batteries into the trash or

a convenient alternative to disposing nickel-cadmium batteries into the trash or

municipal waste stream,which is illegal in some areas.municipal waste stream,which is illegal in some areas.

municipal waste stream,which is illegal in some areas.

Nikko America's payments to RBRC makes it easy for you to drop off the spent batteryNikko America's payments to RBRC makes it easy for you to drop off the spent battery

Nikko America's payments to RBRC makes it easy for you to drop off the spent battery

pack at local retailers who sell replacement nickel-cadmium batteries.pack at local retailers who sell replacement nickel-cadmium batteries.

pack at local retailers who sell replacement nickel-cadmium batteries.

You may also contact your local recycling center for information on where to return theYou may also contact your local recycling center for information on where to return the

You may also contact your local recycling center for information on where to return the

spent battery pack.spent battery pack.

spent battery pack.

RBRC is a trademark of the Rechargeable Battery Recycling Corporation.RBRC is a trademark of the Rechargeable Battery Recycling Corporation.

RBRC is a trademark of the Rechargeable Battery Recycling Corporation.

DO NOT operate your vehicle on thick-piled carpets. It can be dangerous since theDO NOT operate your vehicle on thick-piled carpets. It can be dangerous since the

DO NOT operate your vehicle on thick-piled carpets. It can be dangerous since the

carpet fiber may twine round a shaft and cause a motor overheated.carpet fiber may twine round a shaft and cause a motor overheated.

carpet fiber may twine round a shaft and cause a motor overheated.

NIKKO CVTTP7770, CVTRP7420H, CVTRP7421H, CVTTP7770H, TP7770H User manual

Related papers

Other documents