Daewoo ACP-5010C Servise Manual

Daewoo
Brand
Daewoo
Model
ACP-5010C
Category
Car media receivers
Type
Servise Manual

This manual is also suitable for

Daewoo ACP-5010C: This is a car audio system that will allow you to fully immerse yourself in your favorite music with its 40 watts per channel output. It features electronic tuning, volume, bass, treble, balance, and fader controls, giving you the ability to customize your listening experience to your exact preferences. With its 42 memory capability (18FM+12MW+12LW), you can store your favorite radio stations for easy access. It also includes a local/DX switch, loudness & mute control, and a detachable face for anti-theft protection.

Daewoo ACP-5010C: This is a car audio system that will allow you to fully immerse yourself in your favorite music with its 40 watts per channel output. It features electronic tuning, volume, bass, treble, balance, and fader controls, giving you the ability to customize your listening experience to your exact preferences. With its 42 memory capability (18FM+12MW+12LW), you can store your favorite radio stations for easy access. It also includes a local/DX switch, loudness & mute control, and a detachable face for anti-theft protection.

Service Manual
Car Audio
S/M No : ACP0108EF0
MODEL : ACP-0108 Series
DAEWOO ELECTRONICS CO., LTD
http://svc.dwe.co.kr Mar. 2001
4-Channel high Power (40W x 4Ch)
Electronic Tuning
Electronic Volume/Bass/Treble/Balance/Fader
Control
42 Memory Capability (18FM+12MW+12LW)
Local/DX Switch
Loudness & Mute Control
Compact Disc Player
Detachable Face for Anti-Theft
10 CD-changer control(Option)
Telephone Mute Control
5010Series
CDP-0105A
ACP-5010RDS
ACP-5010RC
ACP-5010C
ACP-5010
AKP-5010RDS
0106Series
ACP-0106A
1. PRODUCT SPECIFICATIONS ..................................................1
2. LINE DRAWING ........................................................................2
3. EMERGENCY TROUBLE SHOOT ............................................3
4. ADJUSTMENTS ........................................................................6
5. SCHEMATIC DIAGRAM ..........................................................11
6. PARTS LOCATION ON P.C.BOARD ......................................12
7. OVERALL EXPLODED VIEW & PARTS LIST .......................15
8. DECK MECHANISM EXPLODED VIEW & PARTS LIST .......16
9. ELECTRICAL PARTS LIST........................................................20
10. FUNCTION OF MICOM IC .....................................................24
11. IC BLOCK DIAGRAM .............................................................30
12. LIQUID CRYSTAL DISPLAY ..................................................34
13. OUTPUT CONNECTION DESCRIPTIONS ............................35
TABLE OF CONTENTS
1
1. PRODUCT SPECIFICATIONS
AUDIO SECTION
Maximum output power : 40watts per channel into 4 ohms.
Load impedance : 4 ohms or 8 ohms
Total harmonic distortion : Less than 10% at 12 watts
Frequency response : 100Hz( +3dB), 10kHz(-5 +3dB)
Control Bass/Treble : 10 +3dB at 100Hz/10kHz
CD PLAYER SECTION
System : 2-track / 2-channel system
Total harmonic distortion : 0.35%max. (WRMS)
Signal to noise ratio(network) : 63Hz ~ 10kHz (+3dB) normal (LH)tape
Wow and flutter Below measurable limit
Laser Diode Properties : Meterial
Ga AIAS
Wave length
760-800 mm
Emission Duration
Continuous
Laser out-put Power
Less than 44.6 W
TUNER SECTION
(FM) Tuning range : 87.5 to 108MHz
Sensitivity : 10dBuV
Stereo separation : 30dB
Signal to noise ratio
:
55dB
Frequency range : 87.5 ~ 108MH
: 522 to 1620KHz at Europe
(MW) Tuning range : 530 to 1710kHz at U.S.A
Sensitivity : 28dBuV
Signal to noise ratio
:
50dB
Frequency range : 522 ~ 1620KHz
Channel space : 9KHz (or 10KHz at U.S.A)
(LW) Tuning range : 144 to 288KHz
Usable Sensitivity : 40dBuV
GENERAL
Power requirements : DC 13.8V (10.8 ~15.6V allowable)
Negative ground
Spdaker impedance : 4 or 8 ohm
Output power : Maximum 40Wx4Ch.
Current consumption : 10A
Dimension (W x H x D) : 178 x 50 x 156 mm
Chassis size : 195 x64 x14.6 mm
Weight(Net) : 1.75Kg
Design and specifications are subject to changes for improvements without notice.
2
2. LINE DRAWING
2-1. FRONT SIDE
2-2. REAR SIDE
ACP-0108RDS Serise
- RDS Function
- Compact Disc Player
- 4-Channel high Power (40W x 4Ch)
- Electronic Tuning
- Electronic Volume /Bass /Treble /Balance
/Fader Control
- 42 Memory Capability (18FM+12MW+12LW)
- Local/DX Switch
- Loudness & Mute Control
- Detachable Face for Anti-Theft
- 10 CD-changer control(Option)
- Telephone Mute Control
ACP-0108 BASIC Series
- Basic Function
- Compact Disc Player
- 4-Channel high Power (40W x 4Ch)
- Electronic Tuning
- Electronic Volume /Bass /Treble /Balance
/Fader Control
- 42 Memory Capability (18FM+12MW+12LW)
- Local/DX Switch
- Loudness & Mute Control
- Detachable Face for Anti-Theft
- 10 CD-changer control(Option)
- Telephone Mute Control
*ACP-5010RDS, 5010RC *AKP-5010RDS
*ACP-5010C, 5010 *CDP-0105A
*ACP-0106A
3
3. EMERGENCY TROUBLE SHOOT
3-1. General Function
No sound from
speakers
Yes
No
Yes
Output connector
is missing
Output connector
is inferior goods
Put exactly output
connector in.
Change output
connector to
superior goods
Yes
No
Power IC, Output
Socket is inferior
goods
Change Power IC,
Output Socket to
superior goods
Yes
A
A
L.C.D or Lamp
is not turned
off.
Yes
No
Yes
Power is not
supplied Return to
Output voltage of
power IC is little.
Change Regulator
IC and check
output voltage.
Yes
No
LCD or Lamp is
inferior goods.
Change LCD or
Lamp to superior
goods.
Yes
Different each
channel have
output level
(Front, Rear,
Left, Right)
Treble or Bass
is low
unusually
Yes
No
Yes
Balance of front
and rear is in one
side
Balance of Left,
Right is in one
side.
Re-adjust Balance
of front, rear
Ref.
Balance = Center
Front / Rear
Ref.
Balance = Center
Left / Right
Ref.
Balance = Center
Treble / Bass
Ref.
Regulator IC output
Voltage = V
Ref.
Electrical Parts List
L.C.D., Lamp
Re-adjust Balance
of Left, Right
Yes
Yes
Balance of Treble
or Bass is in one
side.
Re-adjust Balance
of Treble or Bass
Yes
4
EMERGENCY TROUBLE SHOOT
3-2. Tuner Function
Hearing noise
only
Yes
No
Yes
No selected the
station
Tuner Module is
inferior goods.
Select exactly
broadcasting
frequency.
Change tuner
module to
superior goods.
Yes
Weak frequency
area caused by
elevations
Change to goods of
R.D.S function.
Yes
A
B
A
Station in
other regions
are not held.
Yes Yes
No selected the
local stations. Return to or
Extreme noise
in broadcast
Weak
separation of
FM stereo
Yes
No
Yes
Antenna
connector is
missing
Put exactly
antenna connector
in his jack
Ref.
CAT-7
Adjustments/Tuner
Function of auto-
switch noise
reduction
Ref.
Yes
Weak frequency
area of FM, MW
Switch
automatically to
mono mode in
weak frequency
area
Yes
B
R1 In case of located Glass Antenna, check if heat wire is cut or not in rear window.
R2 Check Antenna connector part.
EMERGENCY TROUBLE SHOOT
5
Disc is not
inserted.
Yes Yes
There is Disc in
the slot
Take out Disc
from the slot
Disc is inferior
goods
Use only superior
disc
No
Yes
A
Selection time
is longer than
unusually
Yes
Selected PAUSE
function
Release PAUSE
function
Yes
Selected MUTE
function
Release MUTE
function
Yes
Mechanism is
inferior goods
Change
Mechanism to
superior goods
Turn power on
again after turn off.
Yes
Inspect disc for
scratches.
Yes
No sound Yes
No
Yes
disc was inserted
upside down
Insert CD with
label side down
Ref.
DWEC CD Mecha
DCM-200/201
Ref.
Power Off/On
Hard Reset
No
No
No
Disc is dirty
Wipe with cleaning
cloth
Yes
A
Ref. Point
Disc is stopped
under eject Yes
It is normal for
CD-Deck or the
slot
Yes
3-3. CD Function
4.
ADJUSTMENTS
6
4-1. TUNER MODULE ADJUSTMENT LOCATIONS
CAT-7 (3 Band)
CAT-6 (2 Band)
ADJUSTMENTS
4-2. MW / LW ADJUSTMENT METHOD
7
STEP
MW
LW
Band Covering
Range
IF
522 KHz
522 KHz
603 KHz
V.T point of
AM Board
Output
Output
522 KHz
450 KHz
603 KHz
AMOSC
MAXIMUM
1620 KHz
1620 KHz - 7.6V
MAXIMUM
MAXIMUM
AMIF
AMRF1
AMRF2
1404 KHz
Output 1404 KHz
MAXIMUM
AMRF1
AMRF2
TRACKING
ALIGNMENT
TUNING
TEST
POSITION
SSG
FREQUENCY
ALIGNMENT
INDICATOR
Band Covering
Range 144 KHz 144 KHz
LWOSC MAXIMUM
TRACKING 220 KHz Output 220 KHz LMRF1
LMRF2
MAXIMUM
-
ADJUSTMENTS
4-3. FM ADJUSTMENT METHOD
8
STEP
1 IF adjust
MPX IC
Separation
Control
98.1 MHz, ANT
input 60dBu, 1kHz
(30% MOD) FM
SSG
ANT jack
and GND
ANT jack
and GND
98.1 MHz, ANT
input 40dBu, 1kHz
(L+R=45%
L-R=45%
PILOT=10% MOD)
The voltage
between CW03
L or R CH SP.
output wire
VTVM and Scope
FM DET
ST
BLEND
Adjust for 0V
0.05V
L, R separation
8dB
2
SUBJECT
FEED SIGNAL
FROM TO MEASURE
OUTPUT ADJUST
POINT
ADJUSTMENT
ADJUSTMENTS
9
Definition of Mechanical Mode
No
1
2
3
4
STOP MODE
LOADING
MODE
PLAY MODE
EJECT
MODE
- Disc haven’t been inserted or disc have been ejected. When disc shall be transported
into the unit
Mechanism shall be fixed at this mode.
- Loading device can insert disc thru the slot.
- Floating device being locked.
- Disc have been inserted thru the slot in front of unit. It is transient state between STOP
mode and PLAY mode.
- If disc should be inserted at the state of POWER ON, disc shall be loaded by a series of
operation of specified device.
- After disc have being clamped on the turn-table, disc shall be rotated.
- Disc shall be played.
- Floating device being unlocked.
- Disc is to be ejected at this mode. It is transient state between PLAY mode and STOP
mode.
-
If disc should be mounted at the state of POWER ON and commanded by EJECT key, disc
shall be ejected thru the slot by a series of operation of specified device.
MODE DEFINITION & STATUS
Standard values / Play-ability test
No
1
2
3
4
5
Loading Time
Ejecting Time
Access Time
Disc
Take-up Force
Disc
7sec + 3sec
6sec + 3sec
<
17 sec
<
15 sec
<
15 sec
<
5 sec
> 120g
> 120g
> 80g
> 90g
During play in
low temp.
> 70g
During play in
low temp.
From insertion up to make sound.
(TCD-784)
From track No.1 Between the EJECT
command and the disc eject completion.
(TCD-784)
From out-most Track, Between the PLAY
command of in-most Track and marking
sound.
Shall be measure when the center of Disc is
correspond with the center of Roller.
Shall be measure when the center of Disc is
correspond with the center of Roller.
ITEMS
CONNEC
TION
SPECIFIED VALUES, CONDITIONS
STANDARD VALUES RELIABILITY LIMITS
TEST CONDITIONS, REFERENCES
4-4. CDP MODE TEST & ADJUSTMENT METHOD
10
No
8
9
10
11
12
13
14
15
16
17
Anti-Vibrational
Performance
Playability
Disc Deflection
Disc
Eccentricity
Jitter
Frequency
Response
Harmonic
Distortion
Dynamic
Range
S/N Ratio
Channel
+ 0.4mm
+ 0.21mm
< 28 nsec
< 0.03% at 1kHz
> 80dB at 1kHz
> 85dB at 1kHz
> 70dB at 1kHz > 65dB at 1kHz
> 85dB at 1kHz
> 75dB at 1kHz
< 0.05% at 1kHz
20-20kHz + 2dB 20-20kHz + 3dB
< 33 nsec
+ 0.21mm
+ 0.4mm
equal with
standard values
-Interruption:0.7mm
-Block Dot Disc:0.8mm
-Scratch Disc:1mm
-
Finger Print Disc:65um
>1.0g/10Hz-20Hz, Z way
>2.0g/30Hz-200Hz, Z way
>0.6g/10Hz-20Hz, X&Yway
>1.2g/30Hz-200Hz, X&Yway
X=side to side
Y=front to back
Z=up to down
Z way only
10Hz-20Hz:0.7g
30Hz-200Hz:1.2g
-The G level should be upped to the sound
skip level from the less level slowly at the
frequency.
-Ignore the sound skip at the near of
resonance frequency(about 100Hz).
-In playing YEDS-10 Tr #5, shall perform with
vibration
-No sound skipping.
-No sound skipping in the specified range.
-The sound skipping does not include any
interpolating noise.
-No sound skipping at the ABEX 731RA Tr
No8
-The sound skipping does not include any
interpolating noise.
-Except from specified item due to the
reliability limits of TEST DISC in the HTO
TEST.
-No sound skipping at the ABEX 713 Tr No8
-The sound skipping does not include any
interpolating noise.
-Except from specified item due to the
reliability limits of TEST DISC in the HTO
TEST.
This measurement may be done at 20Hz,
20kHz, (1kHz=0dB)
400Hz HIGHPASS FILTER
20kHz(-60dB 24kHz) LOWPASS FILTER
20kHz(-60dB 24kHz) LOWPASS FILTER,
60dB AMP IHF-A WEIGHTING FILTER
400Hz HIGHPASS FILTER
20kHz (-60dB 24kHz)LOWPASS FILTER
ITEMS
CONNEC
TION
SPECIFIED VALUES, CONDITIONS
STANDARD VALUES RELIABILITY LIMITS
TEST CONDITIONS, REFERENCES
7
Mechanical
Noise
Loading Eject
< 75dB(A)
Play < 40dB(A)
Access < 70dB(A)
If anything is not
error, shall not
defined.
-Test should be performed in no reverberation
room at the noise level of less than 20dB(A).
-Test should be performed at the 50cm in front
of the unit.
-IHF-A MODE (RMS-FAST)(TCD-792D)
6
Clamping Force
> 130g > 130g
ADJUSTMENTS
11
5. SCHEMATIC DIAGRAMS
OPTION
RDS Function
CDC Function
for ACP-0108Seires
6-1. PCB MAIN
12
6. PARTS LOCATION ON P.C. BOARD
PART SIDE
13
PARTS LOCATION ON P.C. BOARD for ACP-0108Series
BOTTOM SIDE
PARTS LOCATION ON P.C. BOARD for ACP-0108Series
14
PART SIDE
BOTTOM SIDE
6-2. PCB FRONT
15
7. OVERALL EXPLODED VIEW & PARTS LIST
for ACP-0108Seires
16
8. DECK MECHANISM EXPLODED VIEW&PARTS LIST for ACP-0108Seires
8-1. PARTS LIST for DCM-200/201
DECK MECHANISM EXPLODED VIEW & PARTS LIST
for
ACP-0108
Series
No PART NAME
CHASSIS SIDE TOTAL ASSY
CHASSIS SIDE ASSY
LOCK PLATE R ASSY
WASHER CUT D4xD2xT0.25
MOVING PLATE R ASSY
SPG MOVING PLATE
CHASSIS GEAR TOTAL ASSY
CHASSIS GEAR ASSY
MOTOR LOADING
GEAR LOAD MOTOR
CONNECTOR ASSY 2P
SCREW MACHINE PAN M2x2.5
IDLER PLATE ASSY
GEAR 1
GEAR 2
GEAR 3
GEAR 4
WASHER CUT D5xD1.6xT0.25
LEVER SOLENOID
SOLENOID
SPRING IDLER
SCREW MACHINE PAN M2x2.5
CHASSIS TOP TOTAL ASSY
CHASSIS TOP
CUSHION PLATE CLAMP
BRACKET CD GUIDE
SCREW TAPTITE SPL M2x3.5
CHASSIS FLOATING ASSY
CHASSIS CLAMP TOTAL ASSY
CHASSIS CLAMP ASSY
ROLLER CLAMP
WASHER CUT D4xD1.6xT0.25
PLATE CLAMP
DRIVE UNIT TOTAL ASSY
DRIVE UNIT ASSY
PICK-UP ASSY(DOP-200)
GUIDE SLED SCREW
97LA202300
97LA202400
97L3101500
97LA202500
97L3003900
97LA202600
97LA302500
97L8100500
97L2702600
97L8800202
97L3101700
97LA302700
97L2702100
97L2702200
97L2702500
97L2703400
97L3101400
97L2601500
97L7102100
97L3003500
97L3101700
97LA202900
97L0602400
97L4201100
97L2400900
97L3101300
97LA202700
97LA303300
97LA402000
97L3700900
97L3101400
97L0901500
97LA303200
97LA401700
97LA101700
97L2501400
PART NO. Q’TY
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
4
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
MARK
A
A
A
B
A
S
A
A
E
M
E
B
A
M
M
D
M
B
P
E
S
B
A
P
B
M
B
A
A
A
C
C
M
A
A
A
C
1
2
3
4
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
D1
1
2
3
4
D2
1
2
3
AA
B
C
D
17
DECK MECHANISM EXPLODED VIEW & PARTS LIST
for ACP-0108 Series
18
No PART NAME
GEAR SLED SCREW
SLIDER RACK
SPG SLED INSERT
SCREW MACHINE PAN M1.7x3
HOLDER FEED MOTOR
GEAR CENTER
MOTOR FEED
GEAR FEED MOTOR
SCREW MACHINE PAN M2x5 SW
SCREW MACHINE PAN M2x3
PLATE SPG
SCREW TAPPING PAN T2S M2x4
MOTOR SPINDLE
TURN TABLE
SCREW MACHINE PAN M1.7x2.5
PCB SP MOTOR
SWITCH LIMIT
SCREW TAPPING PAN T2S M2x4
DAMPER RUBBER
E-RING( 2)
SPRING CLAMP
SENSOR PCB ASSY
LED PCB ASSY
PCB LED
LED
CONNECTOR ASSY 12P
CONNECTOR ASSY 5P
CONN WAFER(ANGLE) 2P
SWITCH DETECT
PT PCB ASSY
PCB PT
PHOTO TR
HOLDER ROLLER TOTAL ASSY
HOLDER ROLLER ASSY
SHAFT ROLLER
GEAR ROLLER
BEARING ROLLER
ROLLER RUBBER
WASHER CUT D4xD2xT0.25
97L5200300
97L2702700
97L5200100
97L3102100
97L2301100
97L2702800
97L8100600
97L2703300
7051200511
7001200311
97L0902200
7121200411
97L8100700
97L2501500
97L3102200
97L65015BA
5S50101113
7121200411
97L2600900
7402002011
97L3004300
97LA203200
97LA303100
97L65015DA
DSI2321---
97L8800201
97L8800203
97P6271000
5S50101112
97LA303400
97L65015LA
TST2321---
97LA202800
97LA302700
97L3600800
97L2703100
97L5300100
97L3700800
97L3101500
PART NO. Q’TY
1
1
1
2
1
1
1
1
2
2
1
1
1
1
2
1
1
2
3
1
2
1
1
1
4
1
1
2
1
1
1
4
1
1
1
1
2
1
1
MARK
M
M
M
B
M
M
E
M
B
B
P
B
E
M
B
E
E
B
Ru
B
S
A
A
E
E
E
E
E
E
A
E
E
A
A
C
M
M
Ru
B
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
1
2
E1
1
2
3
4
5
6
E2
1
2
1
2
3
4
5
6
E
F
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39

Daewoo ACP-5010C Servise Manual

Daewoo
Brand
Daewoo
Model
ACP-5010C
Category
Car media receivers
Type
Servise Manual
This manual is also suitable for

Daewoo ACP-5010C: This is a car audio system that will allow you to fully immerse yourself in your favorite music with its 40 watts per channel output. It features electronic tuning, volume, bass, treble, balance, and fader controls, giving you the ability to customize your listening experience to your exact preferences. With its 42 memory capability (18FM+12MW+12LW), you can store your favorite radio stations for easy access. It also includes a local/DX switch, loudness & mute control, and a detachable face for anti-theft protection.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents