1

Wattstopper

®

Commercial Equinox Widgets Guide

Installation Instructions

No: IS-0550 – 07/17 rev. 1

EQ73-TB-TI

Country of Origin: Made in China

FEATURES AND OPERATION OVERVIEW

created to provide the most common interface controls. Widgets are self discovering, eliminate countless hours of tedious

programming. Enjoy easy navigation and control, with real time feedback, of lighting, audio, video, climate, weather, security,

cameras, and more. Widgets may be further customized and additional controls accessed, directly from the touchscreen device.

• Landscape orientation for Equinox 73 and compatible tablets

- View three widgets at a time

• Portrait orientation for smart phones, iPods, etc.

- View one widget at a time with a simple swipe or drop-down widget menu for selection of widgets

• Equinox widgets use proprietary, auto discovery technology for fast automatic screen design

• Equinox widgets use a consistent user experience, eliminating learning curves switching interface devices

• Equinox touchscreens, Android tablets and phones, and iPhone, iPod, and iPad Apps all use matching Equinox widgets

 -Showorhideavailablewidgets,basedonprole,byselectingorunselectingthem

 -Createmultipleprolesfordifferentareas,users,ortimeofday

• Middle of screen automatically displays three widgets in a dashboard layout as illustrated. Smaller screens, typically phone sized

screens, only display one widget at a time

• Widgetsareautomaticallycreated(somewidgetsareonlycreatedwhentheDesignCenterprojectlecontainstheappropriate

driver and/or object)

46 3:44 pm mobile 1

2

2

• The Scenes widget allows the creation of personal scenes that can include lighting, music, climate schedules, and other

allows additional weather locations to be added directly from the Weather widget

• The Climate widget allows control and feedback of Vantage thermostats and driver supported thermostats

• The Lighting widget allows control and status feedback of selected lights at the dashboard level. All lights may be seen when

entering full page mode

• The Security widget allows control and monitoring of driver supported security systems

• The Cameras widget allows live streaming of IP enabled cameras using supported camera types

• Bottom of screen, on some tablets, display the tablet’s menu

• Customize widget settings with a press and release of the upper right section of each widget –

• Button text changes color for status.

- White = off and ochre = on.

Compatible with InFusion DesignCenterversion3.2softwareorhigher.Fornewprojectsitisrecommendedthatrmwareand

software be kept to the most current release.

Initial Available Status

3

3

SPECIFCATION Requires Supported Driver/Object

Setup in Design Center

Vantagerecommendsthatrmwareandsoftwarealwaysbekepttothemostcurrentversionsupportedbyhardware.

These are minimum recommendations.

Android Tablets

Android Phones

iPad

Security

Shades

Timers

Cameras

Pool and Spa

EQ41TB-TI

EQ-APP-5 Equinox App License 1-5

EQ-APP-10 Equinox App License 1-10

EQ-APP-X Equinox App License Unlimited

Equinox Widgets provide complete control wherever you are from In-wall devices to mobile devices. The Equinox App and

accompanying in-wall touchscreens provide a simple interface for managing any environment.

INSTALLATION

Installation and use of Vantage’s Equinox App is designed for today’s tablets and smart phones. The App is easy to install. A valid

4

4

LEVEL 1: DASHBOARD - where 90% every day control is used

LEVEL 2: FULL SCREEN - access more options on the selected widget

LEVEL 3: EDIT MODE - edit and customize the selected widget

QUICK START STEPS AND APP DOWNLOAD INSTRUCTIONS

1. Make sure your Vantage System has one or more available Equinox licenses. Configurations for licenses are detailed in the

Additional Equinox App Licenses table. Please contact your Vantage dealer for licensing options.

2. Place the Equinox license SD Card in the InFusion Controller. It is recommended to replace the existing SD card. Remember to

select the option to Write to Memory Cards next time (and periodically) the system is programmed from Design Center to completely

update the new SD card.

3. Make sure the Design Center project has been programmed with an Equinox Mobile Passcode, and an Equinox Admin PIN.

5

5

NOTE: • If the mobile device has already been configured to the

system but has been used on another system and or the device’s

data has been cleared, then after pressing the button in step 2

above, the App will launch. Either message at the left may appear in

similar scenarios.

If the data has been cleared on the InFusion Controller, then the App

should go through the setup wizard steps.

6

6

12. Press the lower right side of the screen, or swipe the screen, to continue to the widgets page.

13. Press the circle to place or remove the checkmark for each widget wanted. The widgets wanted

may also be selected/deselected in Design Center.

14. Press and hold grid icon to slide the selected widget up/down in the list to change the order.

15. Press the modify button to select a default room and from the pursuing screens select the floor

and then the room wanted. The default room selected, in this step, will automatically populate the

lighting widget, for the chosen profile, when setup is finished.

16. Press either fahrenheit or celsius for all temperature displays (default = fahrenheit)

17. Press 12 or 24 hour clock display. (default = 12 hour)

and status information.

7

7

DEVICE SETTINGS (continued)

6. Scroll down to the next device screen for:

• Firmware version – connected: true (false)

- App version – xx.xx.xx (used in diagnostics)

- Kernel version – version and date (used in diagnostics)

- Rootfs version – xx.xx.xx (used in diagnostics)

• Controller ip address – local controller’s IP address to connect to

• Remote ip address – remote connection – typically not used with the

Equinox 73 station

reconnect

reconnect

reset

WIDGETS OVERVIEW

Fordetailedinformationaboutwidgets,clickonletoloadwidgetinstructions

Widget Instructions Equinox Widgets_install.pdf

EQUINOX 73 MOUNTING RING ADJUSTMENT TOOL

Locate this tool-card shipped with the Equinox 73. Inside the wall box is a rectangular ring that must be parallel with the wall surface

and 1” behind the wall surface on the left and right sides. Loosen the two inside screws and use this tool to set the mounting ring

depth at 1”.

CLEANING

• Dampen a soft cloth in water and wring-out to barely damp

• Usealightbufngmotiontowipeclean

• Do not take the station apart

• Never spray station with any cleaners

removing. Do not accidentally touch or push in

on the speaker cones to avoid damage to either speaker.

800.879.8585

of defects in materials and workmanship for a

period of five (5) years. There are no obligations

or liabilities on the part of Wattstopper for

consequential damages arising out of, or in

connection with, the use or performance of this

product or other indirect damages with respect

removal, installation or reinstallation.

ne peut être tenu responsable de tout dommage

dommage indirect lié à la perte de propriété, de

revenus, ou de profits, ou aux coûts d’enlèvement,

d’installation ou de réinstallation.

están libres de defectos en materiales y mano

de obra por un período de cinco (5) años. No

existen obligaciones ni responsabilidades por

parte de Wattstopper por daños consecuentes

que se deriven o estén relacionados con el

uso o el rendimiento de este producto u otros

daños indirectos con respecto a la pérdida

WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA