Powerfist 9118126 Owner's manual

  • Hello! I've reviewed the user manual for the Power Fist Portable Air Compressor and I'm ready to assist you. This document covers everything from essential safety precautions and operational guidelines to maintenance and troubleshooting. Feel free to ask me any questions about the air compressor or the information provided in the manual.
  • What should I do before using the air compressor?
    What personal protective equipment should I wear?
    What should I do if part of the air compressor is missing?
SPECIFICATIONS
HAZARD DEFINITIONS
INTRODUCTION
SAFETY
WARNING! Read and understand all instructions before
using this tool. The operator must follow basic
precautions to reduce the risk of personal injury
and/or damage to the equipment.
WORK AREA
PERSONAL SAFETY
WARNING! Wear personal protective equipment
approved by the Canadian Standards Association (CSA)
or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
PERSONAL PRECAUTIONS
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with
product (gained from repeated use) replace strict
adherence to the tool safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious personal
injury.
DANGER! Do not use an air tank beyond its expiration
date. A tank rupture or explosion may kill or cause a
serious injury to yourself or a bystander. Disable and
discard the air tank according to the your municipality
by-laws.
EXTENSION CORDS
Ampere Rating
Volts
Total length of cord (AWG)
ELECTRICAL SAFETY
WARNING! Do not touch or handle a live tool with any
part of your body that is wet or damp. Wet skin
reduces resistance to electrical current, increasing
the danger of a serious or fatal shock.
WARNING! To reduce risk of electric shock, be certain
that the plug is connected to a properly grounded
receptacle.
WARNING! All wiring should be performed by a
qualified electrician.
AIR HOSE PRECAUTIONS
UNPACKING
WARNING! Do not operate the tool if any part is
missing. Replace the missing part before operating.
Failure to do so could result in a malfunction and
personal injury.
IDENTIFICATION KEY
OPERATION
START-UP
SHUT-DOWN
CARE & MAINTENANCE
WARNING! Before performing any checks or
maintenance, make sure the compressor is off and
unplugged, the air has been bled and that it is properly
cooled.
WARNING! Only qualified service personnel should
repair the tool. An improperly repaired tool may
present a hazard to the user and/or others.
CHECKING THE TANK VALVE
STORAGE
MAINTENANCE SCHEDULE
Frequency
Operation
LUBRICATION
DISPOSAL
IMPORTANT! DO NOT pollute the environment by
allowing uncontrolled discharge of waste oil.
TROUBLESHOOTING
Problem(s)
Suggested Action
PARTS BREAKDOWN
PARTS LIST
DESCRIPTION
QTY
/