OPERATING INSTRUCTIONS

To set time, pull out the crown fully to second position (most outer position); rotate crown to advance time clockwise. To change date

push in crown to number one postion (middle postion) and rotate to set correct date. Push crown back in until firm and watch will operate.

Watch is water-resistant & shock-proof. This watch is also equipped with a stop-second feature and LPC (Low Power Consumption)

movement with EOL (End-of-Life) display where second hand advances in 4 second increments when battery needs replacing.

Accuracy maximum error rate is -0.3/+0.5 seconds per day. Replacement battery is 371 watch battery or equivalent.

This watch is manufactured in accordance with MIL-PRF-46374G, Type II, Class 1. (Analog, minimum life: 2 years, antimagnetic,

water resistant, electrical movement, battery installed).

WATCH, WRIST, GENERAL PURPOSE QUARTZ WITH DATE