Seconique QUEBEC Assembly Instructions

Type
Assembly Instructions

Seconique QUEBEC is a stylish and comfortable bar chair designed for domestic use. With a maximum weight capacity of 100kg, it is suitable for most users. Assembly is simple and requires no special tools, but it is important to follow the instructions carefully to ensure safety. The chair is made of durable materials and is easy to clean with a damp cloth. It is important to avoid using polish or allowing the chair to come into contact with wet or damp objects, as this may cause staining or marking. The surface is not heat resistant, so always use a place mat under hot or cold items.

Seconique QUEBEC is a stylish and comfortable bar chair designed for domestic use. With a maximum weight capacity of 100kg, it is suitable for most users. Assembly is simple and requires no special tools, but it is important to follow the instructions carefully to ensure safety. The chair is made of durable materials and is easy to clean with a damp cloth. It is important to avoid using polish or allowing the chair to come into contact with wet or damp objects, as this may cause staining or marking. The surface is not heat resistant, so always use a place mat under hot or cold items.

SEC/SW/05/23/SF1
Page 01
FOR DOMESTIC USE ONLY
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND
PERIODIC MAINTENANCE AND CLEANING .
ASSEMBLE ON A SOFT CLEAN SURFACE
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD
MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY
BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME . THIS IS
COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT USE POLISH,
DETERGENT OR CHEMICAL CLEANERS.
THIS PRODUCT MAY STAIN OR MARK IF ALLOWED TO COME INTO
CONTACT WITH WET OR DAMP OBJECTS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A
PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
BROWN PU
QUEBEC BAR CHAIR
ASSEMBLY INSTRUCTIONS
MAX CHAIR
WEIGHT
100KG
HARDWARE LIST
12
SEC/SW/05/23/SF1
Page 02
PARTS LIST
BEFORE YOU START ASSEMBLING.IF YOU DO FIND THAT
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
PLEASE CONTACT YOUR SUPPLIER IMMEDIATELY.
SOMETHING IS MISSING.DO NOT CONTINUE ASSEMBLY.
3 4
REF HARDWARE NAME QTY
Allen Key
M8
M5
4
Metal Washer
E
Bolt M6*25mm
Bolt M6*16mm
Bolt M6*13mm 3
4
4
Part Code
Part Number Part Description Quantity Carton
1
3
2
4
1
1
1/1
1
1
1/1
1/1
1/1
Seat Pad
Front Leg
Back Leg
Support Bar
S400-404-026-SF1-01
S400-404-026-SF1-02
S400-404-026-SF1-03
S400-404-026-SF1-04
STEP 1
STEP 2
2 - FRONT LEG x1
PARTS REQUIRED
3 - BACK LEG x1
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
B04
SEC/SW/05/23/SF1
Page 03
TOOLS REQUIRED
HARDWARE REQUIRED
A04
C03
2
3
4
1
4 - SUPPORT BAR x1
1 - SEAT PAD x1
D04
MAX CHAIR
WEIGHT
100KG
M6x16mm
M6x13mm
M6x25mm
M6x16mm
M6x13mm
M6x25mm
  • Page 1 1
  • Page 2 2
  • Page 3 3

Seconique QUEBEC Assembly Instructions

Type
Assembly Instructions

Seconique QUEBEC is a stylish and comfortable bar chair designed for domestic use. With a maximum weight capacity of 100kg, it is suitable for most users. Assembly is simple and requires no special tools, but it is important to follow the instructions carefully to ensure safety. The chair is made of durable materials and is easy to clean with a damp cloth. It is important to avoid using polish or allowing the chair to come into contact with wet or damp objects, as this may cause staining or marking. The surface is not heat resistant, so always use a place mat under hot or cold items.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI