Gigabyte GA-Z97X-UD7 TH Owner's manual

Brand: Gigabyte

Model: GA-Z97X-UD7 TH

Category: Server/workstation motherboards

Type: Owner's manual

GA-Z97X-UD7 TH

User's Manual

Rev. 1001

12ME-Z97XU7T-1001R

Motherboard

GA-Z97X-UD7 TH

May. 2, 2014

Motherboard

GA-Z97X-UD7 TH

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE

without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any

form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of

documentations:

For quick set-up of the product, read the Quick Installation Guide included with the product.

For detailed product information, carefully read the User's Manual.

For product-related information, check on our website at: http://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV:

1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before

updating motherboard BIOS, drivers, or when looking for technical information.

Example:

- 4 -

Table of Contents

Box Contents ...................................................................................................................6

Optional Items .................................................................................................................6

GA-Z97X-UD7 TH Motherboard Layout ..........................................................................7

GA-Z97X-UD7 TH Motherboard Block Diagram .............................................................. 8

Chapter 1 Hardware Installation .....................................................................................9

1-1 Installation Precautions .................................................................................... 9

1-2 ProductSpecications .................................................................................... 10

1-3 Installing the CPU and CPU Cooler ............................................................... 13

1-3-1 Installing the CPU ...................................................................................................13

1-3-2 Installing the CPU Cooler .......................................................................................15

1-4 Installing the Memory ..................................................................................... 16

1-4-1 DualChannelMemoryConguration .....................................................................16

1-4-2 Installing a Memory ................................................................................................17

1-5 Installing an Expansion Card ......................................................................... 18

1-6 Setting up AMD CrossFire™/NVIDIA® SLI™Conguration .............................. 19

1-7 Back Panel Connectors .................................................................................. 20

1-8 Onboard Buttons, Switches and LEDs ........................................................... 23

1-9 Internal Connectors ........................................................................................ 25

Chapter 2 BIOS Setup ..................................................................................................35

2-1 Startup Screen ............................................................................................... 36

2-2 The Main Menu .............................................................................................. 37

2-3 M.I.T. .............................................................................................................. 40

2-4 System Information ........................................................................................ 52

2-5 BIOS Features ............................................................................................... 53

2-6 Peripherals ..................................................................................................... 57

2-7 Power Management ....................................................................................... 62

2-8 Save & Exit ..................................................................................................... 64

Chapter3 ConguringSATAHardDrive(s) ................................................................... 65

3-1 ConguringIntel® Z97 SATA Controllers ........................................................ 65

3-2 ConguringMarvell® 88SE9172 SATA Controller ........................................... 77

3-3 Installing the SATA RAID/AHCI Driver and Operating System ....................... 82

- 5 -

Chapter 4 Drivers Installation ........................................................................................89

4-1 Chipset Drivers ............................................................................................... 89

4-2 Application Software ...................................................................................... 90

4-3 Information ..................................................................................................... 90

Chapter 5 Unique Features ...........................................................................................91

5-1 BIOS Update Utilities ..................................................................................... 91

5-1-1 Updating the BIOS with the Q-Flash Utility .............................................................91

5-1-2 Updating the BIOS with the @BIOS Utility .............................................................94

5-2 APP Center .................................................................................................... 95

5-2-1 EasyTune................................................................................................................96

5-2-2 System Information Viewer .....................................................................................97

5-2-3 EZ Setup .................................................................................................................98

5-2-4 Fast Boot ..............................................................................................................103

5-2-5 Smart TimeLock....................................................................................................104

5-2-6 Smart Recovery 2 .................................................................................................105

5-2-7 USB Blocker .........................................................................................................107

5-2-8 Smart Switch ........................................................................................................108

Chapter 6 Appendix ....................................................................................................109

6-1 ConguringAudioInputandOutput ............................................................. 109

6-1-1 Conguring2/4/5.1/7.1-ChannelAudio .................................................................109

6-1-2 ConguringS/PDIFOut ........................................................................................ 111

6-1-3 ConguringMicrophoneRecording ......................................................................112

6-1-4 Using the Sound Recorder ...................................................................................114

6-2 Troubleshooting............................................................................................ 115

6-2-1 Frequently Asked Questions ................................................................................115

6-2-2 Troubleshooting Procedure ..................................................................................116

6-3 Debug LED Codes ....................................................................................... 118

Regulatory Statements ............................................................................................ 122

Contact Us .............................................................................................................. 127

- 6 -

Box Contents

5GA-Z97X-UD7 TH motherboard

5Motherboard driver disk

5User's Manual

5Quick Installation Guide

5Four SATA cables

5I/O Shield

5One 2-Way SLI bridge connector

Optional Items

2-portUSB2.0bracket(PartNo.12CR1-1UB030-6*R)

eSATAbracket(PartNo.12CF1-3SATPW-4*R)

3.5"FrontPanelwith2USB3.0/2.0ports(PartNo.12CR1-FPX582-2*R)

HDMI-to-DVIadapter(PartNo.12CT2-HDMI01-1*R)

COMportcable(PartNo.12CF1-1CM001-3*R)

The box contents above are for reference only and the actual items shall depend on the product package you

obtain. The box contents are subject to change without notice.

- 7 -

GA-Z97X-UD7 TH Motherboard Layout

(Note) Fordebugcodeinformation,pleaserefertoChapter6.

CPU_FAN

ATX_12V_2X4

Renesas®

uPD720210

Intel®

DSL5520

ATX

F_AUDIO

AUDIO

USB30_LAN

B_BIOS

DDR3_2

DDR3_4

DDR3_3

DDR3_1

BAT

Intel® Z97

CLR_CMOS

M_BIOS

PCIEX1_1

LGA1150

GA-Z97X-UD7 TH

DVI

VGA

PCIEX4

F_USB30

iTE®

Super I/O

TPM

KB_MS_USB3

ATX4P

CODEC

Debug LED (Note)

SYS_FAN3

SYS_FAN4

RST_SW

BIOS_SW

CMOS_SW

F_PANEL

Intel®

GbE LAN

PLX®

PEX8605

MDP1

HDMI_SPDIF

PW_SW

Marvell®

88SE9172

PCIEX1_3

PCIEX8

PCIEX1_2

PCIEX16

MDP2

R_USB30

CPU_OPT

F_USB1F_USB2F_USB3COMASYS_FAN2

SYS_FAN1

SPDIF_O

SATA3

GSATA3

SATA3

1 0

7 6

2 4

3 5

SATA_EXPRESS

MBIOS_LED BBIOS_LED

- 8 -

GA-Z97X-UD7 TH Motherboard Block Diagram

Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications."

LGA1150

CPU

CPUCLK+/-(100MHz)

6 USB 2.0/1.1

PCI Express Bus

PCIe CLK

(100MHz)

DMI 2.0

FDI

4 SATA 6Gb/s

LAN

RJ45

Intel® GbE

LAN

Intel® Z97

4 USB 3.0/2.0

2 SATA 6Gb/s

4 USB 3.0/2.0

Renesas®

uPD720210 Hub

Marvell®

88SE9172

Center/Subwoofer

Speaker Out

Line Out

MIC

Line In

S/PDIF Out

Rear Speaker Out

Side Speaker Out

CODEC

3 PCI Express x1

PLX® PEX8605

x1 x1x1

HDMI

DVI-D

Thunderbolt(MDP2)

Thunderbolt(MDP1)

Intel®

DSL5520

Switch

PCI Express Bus x4

PCI Express Bus

PCIe CLK

(100MHz)

Switch

x16x16

1 PCI Express x16

2 PCI Express x8

x16

2 PCI Express x4+1 PCI Express x8

DDR31600/1333MHz

Dual Channel Memory

D-Sub

Dual BIOS

LPC

Bus

PS/2 KB/Mouse

iTE®

Super I/O

SATA Express

Switch 2 SATA 6Gb/s

COM

- 9 -

Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damagedasaresultofelectrostaticdischarge(ESD).Priortoinstallation,carefullyreadtheuser's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Priortoinstallation,donotremoveorbreakmotherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before unplugging the power supply cable from the motherboard, make sure the power supply

has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

Chapter 1 Hardware Installation

- 10 -

Hardware Installation

1-2 ProductSpecications

CPU Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/

Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors

in the LGA1150 package

(GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.)

L3 cache varies with CPU

Chipset Intel® Z97 Express Chipset

Memory 4 x DDR3 DIMM sockets supporting up to 32 GB of system memory

  * DuetoaWindows32-bitoperatingsystemlimitation,whenmorethan4GBofphysical

memoryisinstalled,theactualmemorysizedisplayedwillbelessthanthesizeof

the physical memory installed.

Dual channel memory architecture

SupportforDDR31600/1333MHzmemorymodules

Support for non-ECC memory modules

SupportforExtremeMemoryProle(XMP)memorymodules

 (GotoGIGABYTE'swebsiteforthelatestsupportedmemoryspeedsandmemory

modules.)

Onboard

Graphics

Integrated Graphics Processor:

 - 1xD-Subport,supportingamaximumresolutionof1920x1200@60Hz

 - 1xDVI-Dport,supportingamaximumresolutionof1920x1200@60Hz

 * TheDVI-DportdoesnotsupportD-Subconnectionbyadapter.

 - 1xHDMIport,supportingamaximumresolutionof4096x2160@24Hzor

2560x1600@60Hz

* SupportforHDMI1.4aversion.

Intel® DSL5520 Chip:

- 2Thunderboltports(MDP1/MDP2)supportforMini-DisplayPortandThunderbolt

monitor(s),andsupportingamaximumresolutionof3840x2160@60Hz.

* IfamonitorisconnectedtotheMDP2Thunderboltport,theDVIportwillbecome

unavailable.

* BecauseofthelimitedI/OresourcesofthePCarchitecture,thenumberofThunderbolt

devices that can be used is dependent on the number of the PCI Express and PCI devices

beinginstalled.(RefertoChapter1-7,"BackPanelConnectors,"formoreinformation.)

- Support for up to 3 displays at the same time

- Maximum shared memory of 1 GB

Audio Realtek® ALC1150 codec

HighDenitionAudio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN Intel®GbELANchip(10/100/1000Mbit)

Expansion Slots 1xPCIExpressx16slot,runningatx16(PCIEX16)

 * Foroptimumperformance,ifonlyonePCIExpressgraphicscardistobeinstalled,

be sure to install it in the PCIEX16 slot.

1xPCIExpressx16slot,runningatx8(PCIEX8)

 * ThePCIEX8slotsharesbandwidthwiththePCIEX16slot.WhenthePCIEX8slot

is populated, the PCIEX16 slot will operate at up to x8 mode.

1xPCIExpressx16slot,runningatx4(PCIEX4)

* ThePCIEX4slotsharesbandwidthwiththePCIEX8andPCIEX16slots.Whenthe

PCIEX4 slot is populated, the PCIEX16 slot will operate at up to x8 mode and the

PCIEX8 will operate at up to x4 mode.

* Wheninstallingax8orabovecardinthePCIEX4slot,makesuretosetPCIE Slot

Conguration (CPU) in BIOS Setup to x4.(Referto Chapter 2, "BIOS Setup,"

"Peripherals,"formoreinformation.)

 (ThePCIEX16,PCIEX8andPCIEX4slotsconformtoPCIExpress3.0standard.)

- 11 -

Hardware Installation

Expansion Slots 3 x PCI Express x1 slots

 (ThePCIExpressx1slotsconformtoPCIExpress2.0standard.)

Multi-Graphics

Technology Support for 3-Way/2-Way AMD CrossFire™and 2-Way NVIDIA® SLI™ Technology

Storage Interface Chipset:

- 1 x SATA Express connector

 - 6xSATA6Gb/sconnectors(SATA30~5)

 (SATAExpressandSATA34/5connectorscanonlybeusedoneatatime.)

- Support for RAID 0, RAID 1, RAID 5, and RAID 10

Marvell® 88SE9172 chip:

 - 2xSATA6Gb/sconnectors(GSATA36~7)

- Support for RAID 0 and RAID 1

USB Chipset:

 - 4xUSB3.0/2.0ports(2portsonthebackpanel,2portsavailablethrough

theinternalUSBheader)

- 6 x USB 2.0/1.1 ports available through the internal USB headers

Chipset + Renesas® uPD720210 USB 3.0 Hub:

- 4 x USB 3.0/2.0 ports on the back panel

Thunderbolt

Intel® DSL5520 Chip:

- 2 Thunderbolt ports on the back panel

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

1 x PCIe power connector

1 x SATA Express connector

8 x SATA 6Gb/s connectors

1 x CPU fan header

1xwatercoolingfanheader(CPU_OPT)

4 x system fan headers

1 x front panel header

1 x front panel audio header

1 x S/PDIF Out header

1 x USB 3.0/2.0 header

3 x USB 2.0/1.1 headers

1 x serial port header

1 x Clear CMOS jumper

1xTrustedPlatformModule(TPM)header

1 x power button

1 x reset button

1 x Clear CMOS button

2 x BIOS switches

Voltage Measurement Points

- 12 -

Hardware Installation

Back Panel

Connectors

1 x PS/2 keyboard/mouse port

1 x D-Sub port

1 x DVI-D port

1 x HDMI port

1 x optical S/PDIF Out connector

2 x Thunderbolt ports

6 x USB 3.0/2.0 ports

1 x RJ-45 port

6xaudiojacks(Center/SubwooferSpeakerOut,RearSpeakerOut,SideSpeaker

Out,LineIn,LineOut,MicIn)

I/O Controller

iTE® I/O Controller Chip

Hardware

Monitor

System voltage detection

CPU/System/Chipset temperature detection

CPU/CPU OPT/System fan speed detection

CPU/System overheating warning

CPU/CPU OPT/System fan fail warning

CPU/CPU OPT/System fan speed control

  * Whetherthefanspeedcontrolfunctionissupportedwilldependonthecooleryou

install.

BIOS 2x128Mbitash

Use of licensed AMI UEFI BIOS

Support for DualBIOS™

PnP 1.0a, DMI 2.7, SM BIOS 2.7, ACPI 2.0

Unique Features Support for APP Center

* AvailableapplicationsinAPPCentermaydifferbymotherboardmodel.Supported

functions of each application may also differ depending on motherboard

specications.

- @BIOS

- EasyTune

- EZ Setup

- Fast Boot

- ON/OFF Charge

- Smart TimeLock

- Smart Recovery 2

- System Information Viewer

- USB Blocker

Support for Q-Flash

Support for Smart Switch

Support for Xpress Install

Bundled

Software

Norton®InternetSecurity(OEMversion)

Intel® Rapid Start Technology

Intel® Smart Connect Technology

Intel® Smart Response Technology

Operating

System

Support for Windows 8.1/8/7

Form Factor

ATX Form Factor; 30.5cm x 24.4cm

* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

* PleasevisittheSupport & Downloads\UtilitypageonGIGABYTE'swebsitetocheckthesupportedoperatingsystem(s)

for the software listed in the "Unique Features" and "Bundled Software" columns.

- 13 -

Hardware Installation

1-3 Installing the CPU and CPU Cooler

Read the following guidelines before you begin to install the CPU:

•Make sure that the motherboard supports the CPU.

 (GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•LocatethepinoneoftheCPU.TheCPUcannotbeinsertediforientedincorrectly.(Oryoumay

locatethenotchesonbothsidesoftheCPUandalignmentkeysontheCPUsocket.)

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

•SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics

card, memory, hard drive, etc.

1-3-1 Installing the CPU

A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Notch

Alignment KeyAlignment Key

Notch

LGA1150 CPU

LGA1150 CPU Socket

Pin One Corner of the CPU Socket

Triangle Pin One Marking on the CPU

- 14 -

Hardware Installation

B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.

Step 1:

Gently press the CPU socket lever handle down

andawayfromthesocketwithyournger.Then

completely lift the CPU socket lever and the metal

load plate/plastic cover will be lifted as well.

Step 2:

HoldtheCPUwithyourthumbandindexngers.

AligntheCPUpinonemarking(triangle)withthe

pinonecorneroftheCPUsocket(oryoumayalign

theCPUnotcheswiththesocketalignmentkeys)

and gently insert the CPU into position.

Step 4:

Finally, secure the lever under its retention tab to

complete the installation of the CPU.

NOTE:

Hold the CPU socket lever by the handle, not the lever base portion.

•Before installing the CPU, make sure to turn off the computer and unplug the power cord from

the power outlet to prevent damage to the CPU.

•To protect the socket contacts, do not remove the protective plastic cover unless the CPU is

inserted into the CPU socket. Save the cover properly and replace it if the CPU is removed.

Step 3:

Once the CPU is properly inserted, carefully

replace the load plate. When replacing the load

plate, make sure the front end of the load plate

is under the shoulder screw. Then press the CPU

socket lever. The protective plastic cover may

pop off from the load plate during the process of

engagingthelever.Removethecover.(Savethe

cover properly and always replace it when the

CPUisnotinstalled.)

- 15 -

Hardware Installation

1-3-2 Installing the CPU Cooler

FollowthestepsbelowtocorrectlyinstalltheCPUcooleronthemotherboard.(Thefollowingprocedureuses

Intel®boxedcoolerastheexamplecooler.)

Use extreme care when removing the CPU cooler because the thermal grease/tape between the CPU

cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.

Step 5:

After the installation, check the back of the

motherboard. If the push pin is inserted as the

picture above shows, the installation is complete.

Step 6:

Finally, attach the power connector of the CPU

coolertotheCPUfanheader(CPU_FAN)onthe

motherboard.

Step 1:

Apply an even and thin layer of thermal grease on

the surface of the installed CPU.

Step 2:

Before installing the cooler, note the direction of the

arrow sign onthemalepushpin.(Turningthe

push pin along the direction of arrow is to remove

thecooler,onthecontrary,istoinstall.)

Step 3:

Place the cooler atop the CPU, aligning the

four push pins through the pin holes on the

motherboard. Push down on the push pins

diagonally.

Step 4:

You should hear a "click" when pushing down each

push pin. Check that the Male and Female push

pins are joined closely.

(RefertoyourCPUcoolerinstallationmanualfor

instructionsoninstallingthecooler.)

Male

Push Pin

Female

Push Pin

The Top

of Female

Push Pin

Direction of

the Arrow Sign

on the Male

Push Pin

- 16 -

Hardware Installation

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

 (GotoGIGABYTE'swebsiteforthelatestsupportedmemoryspeedsandmemorymodules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

1-4-1 DualChannelMemoryConguration

This motherboard provides four DDR3 memory sockets and supports Dual Channel Technology. After the

memoryisinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.Enabling

Dual Channel memory mode will double the original memory bandwidth.

The four DDR3 memory sockets are divided into two channels and each channel has two memory sockets as

following:

Channel A: DDR3_2, DDR3_4

Channel B: DDR3_1, DDR3_3

DDR3_4

DDR3_2

DDR3_3

DDR3_1

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. Dual Channel mode cannot be enabled if only one DDR3 memory module is installed.

2. When enabling Dual Channel mode with two or four memory modules, it is recommended that memory

of the same capacity, brand, speed, and chips be used and installed in the same colored DDR3

sockets. For optimum performance, when enabling Dual Channel mode with two memory modules,

we recommend that you install them in the DDR3_1 and DDR3_2 sockets.

DualChannelMemoryCongurationsTable

DDR3_4 DDR3_2 DDR3_3 DDR3_1

Two Modules - - DS/SS - - DS/SS

DS/SS - - DS/SS - -

Four Modules DS/SS DS/SS DS/SS DS/SS

(SS=Single-Sided,DS=Double-Sided,"--"=NoMemory)

- 17 -

Hardware Installation

1-4-2 Installing a Memory

Before installing a memory module, make sure to turn off the computer and unplug the power

cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs

are not compatible to each other or DDR DIMMs. Be sure to install DDR3 DIMMs on this

motherboard.

DDR3 DIMM

ADDR3memorymodulehasanotch,soitcanonlytinonedirection.Followthestepsbelowtocorrectlyinstall

your memory modules in the memory sockets.

Step 1:

Note the orientation of the memory module. Spread the retaining clips

at both ends of the memory socket. Place the memory module on the

socket.Asindicatedinthepictureontheleft,placeyourngerson

the top edge of the memory, push down on the memory and insert it

vertically into the memory socket.

Step 2:

The clips at both ends of the socket will snap into place when the

memory module is securely inserted.

Notch

- 18 -

Hardware Installation

1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

Follow the steps below to correctly install your expansion card in the expansion slot.

1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.

2. Align the card with the slot, and press down on the card until it is fully seated in the slot.

3. Make sure the metal contacts on the card are completely inserted into the slot.

4. Secure the card's metal bracket to the chassis back panel with a screw.

5. Afterinstallingallexpansioncards,replacethechassiscover(s).

6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for your

expansioncard(s).

7. Install the driver provided with the expansion card in your operating system.

Example: Installing and Removing a PCI Express Graphics Card:

PCI Express x1 Slot

PCI Express x16 Slot

•Installing a Graphics Card:

Gently push down on the top edge of the card until

it is fully inserted into the PCI Express slot. Make

sure the card is securely seated in the slot and

does not rock.

•Removing the Card:

Gently push back on the lever on the slot and then lift the card straight out from

the slot.

- 19 -

Hardware Installation

1-6 Setting up AMD CrossFire™/NVIDIA® SLI™Conguration

•Procedure and driver screen for enabling CrossFire/SLI technology may differ by graphics cards

and driver version. Refer to the manual that came with your graphics cards for more information

about enabling CrossFire/SLI technology.

•When two or more graphics cards are installed, we recommend that you connect the SATA power

cable from the power supply to the ATX4P connector to ensure system stability.

(Note) Thebridgeconnector(s)maybeneededornotdependingonyourgraphicscards.

C-2. To Enable SLI Function

After installing the graphics card driver in the operating system, go to

the NVIDIA Control Panel. Browse to the CongureSLI, Surround,

Physx screen and ensure Maximize 3D performance is enabled.

A. System Requirements

-Windows 8.1/8/7 operating system

-A CrossFire/SLI-supported motherboard with two or more PCI Express x16 slots and correct driver

-CrossFire/SLI-ready graphics cards of identical brand and chip and correct driver

 (CurrentGPUsthatsupport3-WayCrossFiretechnologyincludetheATIRadeon™ HD 3800, HD 4800, HD

5800 series, and AMD Radeon™ HD 6800, HD 6900, HD 7800, and HD 7900 series. For the latest GPU

supportinformation,pleaserefertotheAMDwebsite.)

-CrossFire(Note)/SLI bridge connectors

-Apowersupplywithsufcientpowerisrecommended(Refertothemanualofyourgraphicscardsforthe

powerrequirement)

B. Connecting the Graphics Cards

Step 1:

Observe the steps in "1-5 Installing an Expansion Card" and install CrossFireX/SLI graphics cards on the

PCIExpressx16slots.(Tosetupa2-Wayconguration,werecommendinstallingthegraphicscardsonthe

PCIEX16andPCIEX8slots.)

Step 2:

Insert the CrossFire(Note)/SLI bridge connectors in the CrossFire/SLI gold edge connectors on top of the cards.

Step 3:

Plug the display cable into the graphics card on the PCIEX16 slot.

C.ConguringtheGraphicsCardDriver

C-1. To Enable CrossFire Function

After installing the graphics card driver in the operating system,

go to the Catalyst Control Center. Browse to Performance\AMD

CrossFireX™ and ensure the Enable AMD CrossFireX check box

is selected. If your system have more than two CrossFire cards,

select the GPU combination you want to use and click Apply.

(Availablecombinationoptionsaredependentonthenumberof

graphicscards.)

- 20 -

Hardware Installation

1-7 Back Panel Connectors

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

USB 3.0/2.0 Port

TheUSB3.0portsupportstheUSB3.0specicationandiscompatibletotheUSB2.0/1.1specication.

UsethisportforUSBdevicessuchasaUSBkeyboard/mouse,USBprinter,USBashdriveandetc.

Thunderbolt Port (Note)

Use this port for Thunderbolt devices or Mini-DisplayPort monitors. Because of the limited I/O resources

of the PC architecture, the number of Thunderbolt devices that can be used is dependent on the number

of the PCI Express and PCI devices being installed. Each Thunderbolt port can daisy chain around three

devices. To connect more Thunderbolt devices, adjust the Reserved IO for Thunderbolt setting under

Peripherals\Intel(R)ThunderboltinBIOSSetup.

The two Thunderbolt ports support two DisplayPort monitors in total. The two DisplayPort monitors that

are daisy chained to the same port must be separated by a Thunderbolt device. The maximum supported

resolutionis3840x2160@60Hz,buttheactualresolutionssupportedaredependentonthemonitorbeing

used.

After installing the HDMI device, make sure to set the default sound playback device to HDMI.

(Theitemnamemaydifferdependingonyouroperatingsystem.Thescreenshotbelowisfrom

Windows8.1.)

After installing the DisplayPort device, make sure the default device for sound playback is the

DisplayPortdevice.(Theitemnamemaydifferfromoperatingsystem.Forexample,inWindows7,

go to Start>Control Panel>Hardware and Sound>Sound>Playback and set the DisplayPort device as

thedefaultplaybackdevice.RefertotheHDMIsettingsinformationonthecongurationdialogbox.)

Optical S/PDIF Out Connector

This connector provides digital audio out to an external audio system that supports digital optical audio.

Before using this feature, ensure that your audio system provides an optical digital audio in connector.

HDMI Port

The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD

MasterAudio formats.Italso supports up to192KHz/24bit8-channelLPCM

audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported

resolutionis4096x2160@24Hzor2560x1600@60Hz,buttheactualresolutionssupportedare

dependent on the monitor being used.

(Note) IfamonitorisconnectedtotheMDP2Thunderboltport,theDVIportwillbecomeunavailable.

Page is loading ...

Gigabyte GA-Z97X-UD7 TH Owner's manual

Brand: Gigabyte

Model: GA-Z97X-UD7 TH

Category: Server/workstation motherboards

Type: Owner's manual

Download PDF

report

Gigabyte GA-Z97X-UD7 TH Owner's manual

Gigabyte GA-Z97X-UD7 TH Owner's manual

Related papers

Other documents