2. Herman Miller
  3. Teneo Storage Furniture
Teneo Storage Furniture

Herman Miller Teneo Storage Furniture Product Instructions

  • Hello! I've analyzed the provided document which contains installation instructions for the Herman Miller Teneo top surfaces. These instructions cover models such as WA110.1, WA110.2, WA120.1, WA120.2, WA110.3, and WA120.3. They detail how to attach the top surfaces onto storage units, including information about the required tools and torque settings. I am ready to answer your questions about these installation instructions.
  • What tool is required for the installation?
    What is the torque specification for the screws?
    What type of top surfaces are covered by these instructions?
! "
/
0
1
2
! "
/
0
1
2
<C;03@
16/<53
AG; <C;03@
@3D7A7=<
2@
19
2/B32/B3
;/B3@7/:
</;3
A1/:3
B=:3@/<13AC<:3AA
=B63@E7A3A>3174732
FFFu#
FFu!
Fu$
/<5:3Aut!
2@/E<0G
/>>@=D320G
2/B3
2/B3 16319320G
>@3>/@320G 2/B3
2/B3
@343@3<13 <C;03@ A633B =4
B637<4=@;/B7=<1=<B/7<3263@37<7A1:/AA74732
1=<4723<B7/:7B7AB63A=:3>@=>3@BG=463@;/<;7::3@
7<1/<2/<GCA3B63@3=4/<2=@@3>@=2C1B7=<B63@3=4
7A3F>@3AA:G>@=6707B32E7B6=CBB63E@7BB3<1=<A3<B=4
63@;/<;7::3@7<1
3
3
4
1B42FB
1B42FB
INSTRUCTIONS-
TOP SURFACE INSTALLATION
20 LB 92 BRIGHT PAPER
NONE
MEK JM08/16/07 08/16/07
JM JM08/16/07 08/16/07
1
08/16/07
JM
MEK
1C10DARLS FOR DATABASE
08/02/17
DC
PSE
1DJBZBOBSOLETE
2
1B42FB REV B
Teneo™ Storage Furniture Flat and Curved Top Surface
Installation
WA110.3
WA110.1
WA110.2
WA120.1
WA120.2
Tools Required:
3/16 Allen Wrench
3
1B42FB REV B
1. Set Pillars, supplied with storage unit, on top of Rings and align holes.
Note: Product WA110. shown throughout instructions.
2. Set Top onto Pillars.
3.Insert Screws, supplied with storage unit, through Rings, Pillars and into Top
Surface. Do not tighten until all screws are installed. Once all Screws are started,
Ring
Pillar
WA110.1 & WA120.1
WA110.2 & WA120.2
Screw
Pillar
Screw
Pillar
Screw
Top Surface
Top Surface
Ring
Ring
Ring
Ring
Pillar
Screw
Pillar
tighten to 50-75 in-lbs.
4
1B42FB REV B
WA110.3 & WA120.3
2. Set Pillars, supplied with storage unit, on top of Rings and align holes.
3. Set Top onto Pillars.
4. Insert Screws, supplied with Unit, through Rings, Pillars and into Top
Surface. Do not tighten until all screws are installed.
Pillar
Screw Ring
Ring
Ring
Pillar
Pillar
1. Position Units back to back.
/