Wet Sounds SW-10FA Owner's manual

Wet Sounds
Brand
Wet Sounds
Model
SW-10FA
Category
Loudspeakers
Type
Owner's manual

This manual is also suitable for

XS-12/XS-10FA/SW-10FA/SS-10B
MarineSubwoofers
Owner’sManual
323099/227-25/08/10
Wet Sounds professional marine audio products represent the ultimate in high performance marine audio. Wet Sounds speakers are specifically
engineered to withstand the rigorous marine environment. The Wet Sounds subwoofers were designed to provide amazing output combined with a cutting
edge style. Utilizing state of the art acoustic engineering and three dimensional computer aided design, the subwoofers represent the most advanced marine
speakers in the world. Please take a moment to read the instruction manual before starting your installation. If you have any questions or concerns, please
contact you certified Wet Sounds dealer or Wet Sounds at 877-938-7757.
Thank YouforpurchasingthisWetSoundsproduct!
TECHNICAL SPECIFICATIONS
12inchmarinesubwoofer
Impedance – Dual2ohms
Resistance(parallel) – 1.0ohm
Sd – 0.0511m2
Xmax – 11.0mm
Fs=28Hz
Vas=60l
Qts=0.47
SPL – 88dB/w/m
Frequencyresponse – 20to400Hz
RMSPower – 500watts
PeakPower – 1000watts
XS-12D-2
12inchmarinesubwoofer
Impedance
– Dual4ohms
Resistance(parallel) – 1.9ohms
Sd – 0.0511m2
Xmax – 11.0mm
Fs=28Hz
Vas=62l
Qts=0.48
SPL – 88dB/w/m
Frequencyresponse – 20to400Hz
RMSPower – 500watts
PeakPower – 1000watts
XS-12D-4
10inchmarinesubwoofer
10inchmarinesubwoofer
Impedance
Impedance
–
–
Dual2ohms
Dual2ohms
–
–
1.0ohm
1.0ohm
Sd
Sd
–
–
0.0380m2
0.0363m2
Xmax
Xmax
–
–
1
1.0mm
7.0mm
Fs=30Hz
Fs=32Hz
Vas=40l
Vas=45l
Qts=0.48
Le=0.46mH
Le=0.40mH
Le=0.37mH Le=0.24mHLe=0.60mH
Le=0.32mH
Qts=0.42
SPL
SPL
–
–
88
88
dB/w/m
dB/w/m
Frequencyresponse
Frequencyresponse
–
–
RMSPower
RMSPower
–
–
300watts
250watts
PeakPower
PeakPower
–
–
600watts
500watts
XS-10FAD-2
SS-10B
SW
-10FA-WD2
20to500Hz
28to2000Hz
Resist
ance(parallel)
Resistance(parallel)
10inchmarinesubwoofer
10inchmarinesubwoofer
Impedance
Impedance
–
–
Dual4ohms
Dual2ohms
–
–
1.8ohms
1.0ohm
Sd
Sd
–
–
0.0380m2
0.0380m2
Xmax
Xmax
–
–
11.0mm
11.0mm
Fs=30Hz
Fs=30Hz
Vas=45l
Vas=40l
Qts=0.54
Qts=0.48
SPL
SPL
–
–
88
88
dB/w/m
dB/w/m
Frequencyresponse
Frequencyresponse
–
–
RMSPower
RMSPower
–
–
300watts
300watts
PeakPower
PeakPower
–
–
600watts
600watts
XS-10FAD-4
20to500Hz
20to500Hz
Resist
ance(parallel)
Resistance(parallel)
WhatThisWarrantyCovers
HowLongCoverageLast
WhatIsNotCovered
WhatWetSounds,Inc.WillDo
HowtoObtainWarrantyService
InternetWarning
Thisisa“Limited”warranty.Thiswarrantycoversanydefectsinmaterialsandworkmanshipandwarrantyonlyappliestotheoriginalpurchaserandis
nottransferable.ThiswarrantyisalsoonlyvalidiftheoriginalpurchasewasmadefromanauthorizedWetSounds™dealer.
Thiswarrantyrunsforoneyearfromthedateofthepurchase.ItisrecommendedtoREGISTERyourwarrantyonlinewithin45daysofyourpurchaseat
www.wetsounds.com-clickon“warrantyregistration”
WetSounds,Incwillrepairanypartofyourproductthatprovestobedefectiveinmaterialsorworkmanship.Intheeventrepairisnotpossible,Wet
Sounds,Incwillreplacetheproductinquestion.IfitisdeemednecessaryWetSounds,Inc.willeitherreplacetheentireproductwitha
refurbishedunitoritwillbereplacedwithamodelthatissimilarinpriceifthatmodelisnolongeravailable.Laborcostandmaterialsneededto
completethisservicewillbeatnochargetothepurchaser.Additionally,thecostofshippingTOtheconsumerisalsocoveredunderthiswarranty.
ContactWetSounds,Inc.eitherbyphoneat877-938-7757orbyemailat w[email protected].Aservicerepresentativewillassistyouinthe
necessaryactionstoverifythattheproblemthatyouareexperiencingiscoveredunderwarranty.Ifitisinfactawarrantyissue,WetSoundswillissue
anRAnumberfortrackingpurposesandgiveinstructionsonsendingtheproductinforevaluation.
WetSounds,Inc.productssoldonanynonauthorizedwebsiteorinternetauctionsitearevoidofanyandallmanufacturer'swarranty.Pleasecontact
WetSounds™at877-938-7757orvisitourwebsiteatwww.wetsounds.comtosearchforanauthorizedsiteand/oranauthorizedretailernearyou.
Thiswarrantydoesnotcoverfadingordiscolorationcausedbyexposuretosunlightorchemicalssuchasammonia,householdbleach,oranycleaning
materialthatcontainsabrasivesubstances.(Forinformationonhowtopreventfadingordiscoloration,consult for
recommendationsoncleaningproducts) WetSounds,Inc.doesnotcoverthecostforremovalandreinstallationofanykind.Additionally,shippingTO
WetSounds,Inc.iscoveredbythepurchaser ThiswarrantyisvoidandinapplicableifWetSounds™deemsthattheproductwasabusedormisused;
includingbutnotlimitedtoSpeakerproductthathasbeenimproperly-powered(underoroverpowered),causingthermal(burntvoicecoil)and/or
mechanicalfailure(tornsurroundsorspiders),damagecausedbyaccident,mishandling,improperinstallation,negligence,normalwearandtear,
excessivewaterorheatdamage,freightdamageorproductsthathavebeenalteredinanyway.Productownedbyanyoneotherthantheoriginal
purchaserfromanauthorizedWetSoundsdealer. (Thewarrantyisnottransferableandwillnotapplytoproductspurchasedfromunauthorized
dealers.)WetSoundsisnotresponsibleforanydamagestoaconsumer'sboatorpersonfromaproductfailure.ThewarrantyisvoidifWetSounds
deemstheproductwasinstalledorusedimproperly.WetSoundsshallnotberesponsibleforanyincidentalorconsequentialdamages,excepttothe
extentprovided(orprohibited)byapplicablelaw.Thiswarrantygivesyouspecificlegalrights,andyoumayalsohaveotherrightswhichvaryfromstate.
newora
.
.
www.wetsounds.com
LimitedWarranty
WIRING
WET SOUNDS Marine subwoofers are offered in Dual Voice Coil configuration 2+2 and 4+4 ohms. Voice coils can be wired
in parallel (Z = 1or 2 ohms) or in series (Z = 4 or 8 ohms), allowing the user to properly match the driver to the amplifier.
2+2ohms
XS-10FA SW-10FA XS-12
XS-10FA SW-10FA XS-12
4+4ohms
ParallelZ=1Ohm
ParallelZ=2Ohms
SS-10B
2ohms 2ohms
Series Z=4Ohms
2ohms 2ohms
ParallelZ=1Ohm
SeriesZ=4Ohms
SeriesZ=8Ohms
The Wet Sounds subwoofers are a line of advanced low frequency transducers. These subwoofers use advanced materials throughout such as our
exclusive rubber spider, composite cones and thermoformed rubber surrounds. Wet Sounds has developed an exclusive rubber spider for our subwoofers
which is used for the spider as most marine speakers use cloth that will deteriorate over time. These subwoofers are built to last in the harshest environments.
The XS/WS subwoofers utilize a cast aluminum frame that is powder coated to provide a solid non flexing mount. Advanced acoustical technologies like
perimeter venting, high temperature voice coils also help to make these the most advanced marine subwoofers on the market.
DIMENSIONSmm(”)
SS-10B
0.21”(5.5mm)
9.68”(246mm)
10.12”(257mm)
o
o
o
6.30”(160mm)
9.21”(234mm)
5.27”
(134mm)
6mm
0.24”
o
o
XS-12
4.92”
(125mm)
11.22”(285mm)
7.36”(187mm)
20mm
0.78”
o
o
0.27”(7mm)
12.6”(320mm)
11.8”(300mm)
o
o
o
6.49”(165mm)
9.37”(238mm)
4.72”
(120mm)
36mm
1.42”
o
o
10.07”(256mm)
0.21”(5.5mm)
11.02”(280mm)
o
o
o
XS-10FA
SW-10FA
4.72”
(120mm)
6.49”(165mm)
9.37”(238mm)
36mm
1.42”
o
o
10.07”(256mm)
0.21”(5.5mm)
11.02”(280mm)
o
o
o
3
SS-10B
Ventedbox 1.32ft/37liters
Tunedat32Hz
3
”
o
XS-10FA
SW-10FA
Sealedbox 1.1ft/31liters
3
SS-10B
Sealedbox 0.85ft/24liters
3
The SPL marine subwoofer have been specifically engineered to produce outstanding results in both small sealed
enclosures and vented enclosures.
WET SOUNDS
As a rule, sealed enclosures provide better transient bass response than their vented counterparts, although the
vented enclosures generally provide more deep bass. However, both enclosure types will work in any situation.
This enclosure is made up of a totally closed, air-tight box. This type of enclosure gives excellent, tight bass response, as well as
providing an effective control of loudspeaker excursion, maintaining it within reasonable limits and generally providing lower distortion and very high
volume levels. If you build your own enclosure, recommends that you glue and screw all joints using enough adhesive to ensure
that all joints are air-tight.
WET SOUNDS
SEALEDENCLOSURES
Vented enclosures are not air-tight and incorporate an additional opening known as a port or vent, which is generally fabricated from
either plastic or cardboard tubing. The port augments the sound coming out of the woofer and is in most cases capable of going lower in frequency
than the same woofer in a sealed box. Even though vented enclosures are not air-tight, you should follow the same procedure as with sealed boxes
and glue and screw together all joints. Bellow you will find drawings for enclosures specifically designed for Marine subwoofer . The
dimensions shown in drawings (already taking in account the volume occupied by the subwoofer) are intended as a guideline and specific
dimensions (HxWxD) may be used provided the internal volume of the enclosure is maintained. In the special case of SEALED enclosures,
volumes greater or smaller than specified in the table can be chosen, with different results. Smaller enclosures lead to a more enhanced response
and higher power handling whereas larger ones exhibit better transient and more extended response.
WET SOUNDS
VENTEDENCLOSURES
INSTALLATION-SEALED ANDVENTEDENCLOSURES
Sealedbox 1.18ft/33liters
3
XS-12
14”
3
XS-12
Ventedbox 1.64ft/46liters
Tunedat26Hz
3
”
o
17”
14”
12-
13-
13-
13-
1/2”
1/2”
1/2”
1/2”
13”
12”
12-
16-
13-
14”
13-
14-
15”
16”
1/2”
3/4”
1/2”
1/2”
½”
For best performance the walls of the enclosure should be rigid and not vibrate as a result of the internal pressures generated
by the loudspeakers. recommends constructing enclosures from a marine grade plywood like Birch with a minimum
thickness of 3/4”. In larger enclosures over 1 cubic foot, internal bracing that joins opposite walls can be incorporated and the final enclosure
should be as rigid as possible. All joints should be glued and fastened with screws. Additionally, internal joints can be covered with a small
bead of silicone adhesive to ensure that the enclosure is completely air-tight. Drivers should be fastened to the enclosure with self-threading
screws with adequate length and diameter, utilizing all the mounting holes in the frame. To avoid air leakage, a foam rubber gasket or similar
sealing method should be applied between the loudspeaker and the enclosure. The external surface of the enclosure may be painted or
fabric-covered, to suit the consumer. Since low frequency sounds are not directional, subwoofer enclosures can generally be placed
anywhere within the boat, without compromising stereo imaging. However, different placement locations of subwoofer enclosures can
sometimes influence the overall quality of bass/midbass response, so you may wish to experiment with various mounting locations before
permanently mounting the woofer.
WET SOUNDS
ENCLOSURECONSTRUCTION
SS-10B
o
o
o
o
o
(246.0mm)
(6.3mm)
(6.3mm)
(6.3mm)
9-
9-
11-
9-
(235.0mm)
60°
HOLETEMPLATE
XS-10FA
SW-10FA
o
o
(256.0mm)
10”
(240.0mm)
60°
XS12
12”
(286.0mm)
(300.0mm)
45°
o
o
1/4”
1/2”
1/4”
1/4”
1
/4”
1/4”
11/16”
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Wet Sounds SW-10FA Owner's manual

Wet Sounds
Brand
Wet Sounds
Model
SW-10FA
Category
Loudspeakers
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents