Intellinet 503785 Installation guide

Category
Network antennas
Type
Installation guide
HigH-gain
OutdOOr
ParabOlic
grid antenna
QuicK inStall
guide
Model 503785
Thank you for purchasing this
INTELLINET NETWORK
SOLUTIONS
High-Gain
Outdoor Parabolic Grid Antenna,
Model 503785.
Use it to avoid the cost and the
trouble of running outdoor cable
between buildings when you
expand your wireless network.
(Installation instructions on back.)
INT-503785-miniQIG-0508-01
INTELLINET NETWORK SOLUTIONS
offers a complete line of active and passive
networking products. Ask your local computer dealer for more information or visit
Copyright © INTELLINET NETWORK SOLUTIONS
All products mentioned are trademarks or registered trademarks of their respective owners.
www.intellinet-network.com.
Weatherproof
and corrosion
resistant
For either pole
or wall mounting
Lifetime
Warranty
Ideal for long-distance,
outdoor, wireless
point-to-point
connections
of up to 15
km (9 mi.)
Survives hurricane-force
winds up to 168 km/h (105 mph)
ElEctrical
Frequency band: 2.4000
2.4835 GHz (Industrial
ScienticMedicalBand)
•Gain:24dBi
•VSWR:≤2.0
Polarization: vertical
•HPBW/horizontal:7.7°
•HPBW/vertical:6.5°
Power handling: 10 W
Impedance: 50 Ohms
Connector: N-type female
EnvironmEntal/mEchanical
Operating temperature:
-30–80°C(-22–140°F)
Humidity: 95% RH
Radome color: white
•Radomematerial:ABS+
UV resistance
Mount: zinc-iron plating
•Weight:3.0kg(6.6lbs.)
•Dishdiameter:600mm
(23.6in.)
Max. pole mount diameter:
4.8 cm (1.8 in.)
Mounting hardware
included
SPecificatiOnS
* To obtain optimal results in extending the range of your wireless network, it is
recommended that a professional installer service be consulted for a site survey
and proper installation. The actual achievable wireless distance depends on the
installation environment and may vary.
inStallatiOn*
Fig. 1
Remove the nut from the feeder,
ensuring the O-ring remains on
the feeder.
With the O-ring still in place,
push the feeder through the
centerholeofthereecting
grid. Make sure the arrow on
the feeder is pointing up.
Insert the screws through the
holes so the threads come out
the back of the grid to attach it
totheN-typefemaleconnector/
bracket.
Fig. 2
Place a washer on each screw
protruding through the grid.
Line up the screws with the
corresponding holes on the N-
typefemaleconnector/bracket
and attach the grid to the bracket,
securing it with the nuts.
Fig. 3
Position the unit on a pole (max.
4.8cmdiameter)**andxitin
place with the U-shaped staples
and remaining washers and nuts.
** For wall mounting, simply attach
thebrackettoaatsurfacethat
you know can support the weight
of the assembled unit.
Fig. 1
Fig. 2
Fig. 3
  • Page 1 1
  • Page 2 2

Intellinet 503785 Installation guide

Category
Network antennas
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI