IC Intracom 503785 Installation guide

Brand: IC Intracom

Model: 503785

Category: Network antennas

Type: Installation guide

HigH-gain

OutdOOr

ParabOlic

grid antenna

QuicK inStall

guide

Model 503785

Thank you for purchasing this

INTELLINET NETWORK

SOLUTIONS

™

High-Gain

Outdoor Parabolic Grid Antenna,

Model 503785.

Use it to avoid the cost and the

trouble of running outdoor cable

between buildings when you

expand your wireless network.

(Installation instructions on back.)

INT-503785-miniQIG-0508-01

INTELLINET NETWORK SOLUTIONS

™

offers a complete line of active and passive

networking products. Ask your local computer dealer for more information or visit

All products mentioned are trademarks or registered trademarks of their respective owners.

www.intellinet-network.com.

•

Weatherproof

and corrosion

resistant

•

For either pole

or wall mounting

•

Lifetime

Warranty

•

Ideal for long-distance,

outdoor, wireless

point-to-point

connections

of up to 15

km (9 mi.)

•

Survives hurricane-force

winds up to 168 km/h (105 mph)

ElEctrical

• Frequency band: 2.4000 –

2.4835 GHz (Industrial

 ScienticMedicalBand)

•Gain:24dBi

•VSWR:≤2.0

• Polarization: vertical

•HPBW/horizontal:7.7°

•HPBW/vertical:6.5°

• Power handling: 10 W

• Impedance: 50 Ohms

• Connector: N-type female

EnvironmEntal/mEchanical

• Operating temperature:

 -30–80°C(-22–140°F)

• Humidity: 95% RH

• Radome color: white

•Radomematerial:ABS+

UV resistance

• Mount: zinc-iron plating

•Weight:3.0kg(6.6lbs.)

•Dishdiameter:600mm

 (23.6in.)

• Max. pole mount diameter:

4.8 cm (1.8 in.)

• Mounting hardware

included

SPecificatiOnS

* To obtain optimal results in extending the range of your wireless network, it is

recommended that a professional installer service be consulted for a site survey

and proper installation. The actual achievable wireless distance depends on the

installation environment and may vary.

inStallatiOn*

Fig. 1

• Remove the nut from the feeder,

ensuring the O-ring remains on

the feeder.

• With the O-ring still in place,

push the feeder through the

 centerholeofthereecting

grid. Make sure the arrow on

the feeder is pointing up.

• Insert the screws through the

holes so the threads come out

the back of the grid to attach it

 totheN-typefemaleconnector/

bracket.

Fig. 2

• Place a washer on each screw

protruding through the grid.

• Line up the screws with the

corresponding holes on the N-

 typefemaleconnector/bracket

and attach the grid to the bracket,

securing it with the nuts.

Fig. 3

• Position the unit on a pole (max.

 4.8cmdiameter)**andxitin

place with the U-shaped staples

and remaining washers and nuts.

** For wall mounting, simply attach

 thebrackettoaatsurfacethat

you know can support the weight

of the assembled unit.

Fig. 1

Fig. 2

Fig. 3

IC Intracom 503785 Installation guide

Brand: IC Intracom

Model: 503785

Category: Network antennas

Type: Installation guide

Download PDF

report

IC Intracom 503785 Installation guide

IC Intracom 503785 Installation guide

Related papers

Other documents