Proslat 19103 Installation guide

Type
Installation guide

This manual is also suitable for

PROSLAT CABINET WARRANTY
We guarantee our cabinet against material and workmanship defects for 10 years. This warranty does not include any cost related to installation or return of the cabinet.
This warranty is valid provided that the maximum weight supported by the cabinet does not exceed 250 pounds when directly mounted to studs or 150 pounds when hung on a proslat panel. The
customer, installer or the dealer, releases PROSLAT of all claims if the cabinet has been loaded with more than mentioned above. The cabinet MUST BE installed as described in the INSTALLATION
INSTRUCTIONS.
This warranty does not cover corrosion, rust or discoloration of paint, or product failure due to misuse, abuse, faulty installation, alteration or any other failure not related to defects in materials or
workmanship.
DISCLAIMER OF LIABILITY
Proslat Inc. and its successors, distributors and dealers (hereafter SELLER) shall in no way be responsible for the product’s proper use and service. THE BUYER HEREBY WAIVES ALL LIABILITY CLAIMS. The
BUYER acknowledges that he/she is not relying on the SELLER’s skill or judgment to select or furnish goods suitable for any particular purpose and that there are no liabilities which extend beyond the
description on the face hereof and the BUYER hereby waives all remedies or liabilities, expressed or implied, arising by law or otherwise, (including without any obligations of the SELLER with respect to
merchantability and consequential damages) or whether or not occasioned by the SELLER’s negligence. The SELLER disclaims any warranty and expressly disclaims any liability for personal injury or
damages. The BUYER acknowledges and agrees that the disclaimer of any liability for personal injury is a material term for this agreement and the BUYER agrees to indemnify the SELLER and to hold the
SELLER harmless from any claim related to the item of the equipment purchased. Under no circumstances will the SELLER be liable for any damages or expenses by reason of use or sale of any such
equipment. The SELLER assumes no liability regarding the improper installation or misapplication of its products. It is the installers responsibility to check for proper installation and if in doubt, contact
the manufacturer. These assembly guidelines will direct you through the process of assembling a section of Proslat Inc product. Please keep in mind that they may not cover every assembly or
installation scenario you may encounter. Since each installation is unique in its performance requirements, the ultimate installation method used is the sole responsibility of the installer. Proslat Inc.
disclaims any liability or responsibility for the improper installation of this product. The purchaser is solely responsible for compliance with applicable local codes. Proslat Inc. recommends that all designs
be reviewed
INSTALLATION INSTRUCTIONS
On Proslat panels On standard walls
PROSLAT CABINET WARRANTY
1. Install the supplied backplate at the
desired height.
1. Locate your studs.
2. Screw cabinet into your studs. Screw must
penetrate 2 inches into studs.
Screws not included
2. Hang your cabinet on the backplate.
Two dierent elevations for height adjustment.
When installing two cabinets, one above the other
the lower cabinet can be hung on the lower cut
outs and the upper on the upper cut outs. This will
make a perfect uniform t.
  • Page 1 1
  • Page 2 2

Proslat 19103 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages