Sharp LL-S242A-W Owner's manual

Category
Flat panel accessories
Type
Owner's manual

This manual is also suitable for

LL-S242A-W
LL-P202V
LCD MONITOR
MONITEUR LCD
MONITOR LCD
LCD FARBMONITOR
ЖК МОНИТОР
SETUP MANUAL
MANUEL D’INSTALLATION
MANUAL DE INSTALACIÓN
INSTALLATIONSANLEITUNG
РУКОВОДСТВО ПО УСТАНОВКИ
ENGLISH ...... E1
FRANÇAIS ..... F1
ESPAÑOL .... S1
DEUTSCH ..... D1
РУССКИЙ...... Р1
(

CD-ROM

)
DEUTSCH РУССКИЙ
ENGLISH FRANÇAIS ESPAÑOLENGLISH FRANÇAIS ESPAÑOL
NOTE FOR USERS IN U.K.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
BLUE: “NEUTRAL”
BROWN: “LIVE”
CONNECTING PLUG TO MAINS LEAD:
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the
terminals in your plugs, proceed as follows:
• The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
• The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
CAUTION:
Do not connect the Live (BROWN) wire or the neutral (BLUE) wire to the earth terminal of your 3 pin mains plug.
ENGLISH
1
E
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning ash with arrowhead symbol, within
a triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufcient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within a triangle is
intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your
product, please read the Safety Precautions carefully before using this product.
DEAR SHARP CUSTOMER
IMPORTANT INFORMATION
Contents
Read the manuals in the “Manual” folder of the provided CD-ROM. (Adobe Reader is required to view the manuals.)
[ENGLISH]
IMPORTANT INFORMATION ............................................1
DEAR SHARP CUSTOMER .............................................. 1
SAFETY PRECAUTIONS ..................................................2
SAFETY INSTRUCTION ...................................................3
Supplied Components ..................................................... 4
Applying the Logo Sticker ..............................................4
Binding Cables ................................................................. 5
Connecting Devices ........................................................6
Connecting the Monitor to a Power Source ..................7
Installation ........................................................................8
Turning Power On/Off ....................................................11
Specications ................................................................12
The volume is set to 0 when the monitor is shipped from the factory.
2
E
SAFETY PRECAUTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly
handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can
result in electric shock and/or re. In order to prevent potential danger, please observe the following instructions when installing,
operating and cleaning the product. To ensure your safety and prolong the service life of your LCD product, please read the
following precautions carefully before using the product.
1. Read instructions — All operating instructions must be read and understood before the product is operated.
2. Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future
reference.
3. Observe warnings — All warnings on the product and in the instructions must be observed closely.
4. Follow instructions — All operating instructions must be followed.
5. Cleaning — Unplug the power cord from the AC outlet before cleaning the product. Use a dry cloth to clean the product. Do
not use liquid cleaners or aerosol cleaners.
6. Attachments — Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result
in accidents.
7. Water and moisture — Do not use the product near water. Do not install the product in a place where water may splash onto
it. Be careful of equipment which drains water such as an air-conditioner.
8. Ventilation — The vents and other openings in the cabinet are designed for ventilation.
Do not cover or block these vents and openings since insufcient ventilation can cause overheating and/or shorten the life
of the product. Do not place the product on a sofa, rug or other similar surface, since they can block ventilation openings.
Do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the
manufacturers instructions are followed.
9. Power cord protection — The power cords must be routed properly to prevent people from stepping on them or objects from
resting on them.
10. The screen used in this product is made of glass. Therefore, it can break when the product is dropped or applied with
impact. Be careful not to be injured by broken glass pieces in case the screen breaks.
11. Overloading — Do not overload AC outlets or extension cords. Overloading can cause re or electric shock.
12. Entering of objects and liquids — Never insert an object into the product through vents or openings. High voltage ows in
the product, and inserting an object can cause electric shock and/or short internal parts.
For the same reason, do not spill water or liquid on the product.
13. Servicing — Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other
dangerous conditions. Request a qualied service person to perform servicing.
14. Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualied service
person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls
not described in the instructions can cause damage, which often requires extensive adjustment work by a qualied
technician.
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product
needs servicing.
15. Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement
parts specied by the manufacturer, or those with the same characteristics and performance as the original parts. Use of
unauthorized parts can result in re, electric shock and/or other danger.
16. Safety checks — Upon completion of service or repair work, request the service technician to perform safety checks to
ensure that the product is in proper operating condition.
17. Wall mounting — When mounting the product on a wall, be sure to install the product according to the method
recommended by the manufacturer.
18. Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating
products (including ampliers).
19. Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury,
severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and
missile launch control in a weapon system.
20. Do not touch the parts of the product or the AC adapter that become hot for long periods of time. Doing so may result in
low-temperature burns.
To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: HDMI input terminal
and DisplayPort input terminal.
This product is designed for commercial application only and as such it falls outside the scope of Regulation (EC) 1275/2008
implementing EU Directive 2005/32/EC on eco-design requirements for standby and off mode electric power consumption.
SHARP do not recommend the product for domestic application and will not accept any liability for such use.
ENGLISH
3
E
- Do not use the monitor where there is a lot of dust, where
humidity is high, or where the monitor may come into contact
with oil or steam. Do not use in an environment where
there are corrosive gases (sulfur dioxide, hydrogen sulde,
nitrogen dioxide, chlorine, ammonia, ozone, etc.). As this
could lead to re.
- Ensure that the monitor does not come into contact with
water or other uids. Ensure that no objects such as paper
clips or pins enter the monitor as this could lead to re or
electric shock.
- Do not place the monitor on top of unstable objects or in
unsafe places. Do not allow the monitor to receive strong
shocks or to strongly vibrate. Causing the monitor to fall or
topple over may damage it.
- Continuous Operation Time and Warranty
This product has been designed based on the assumption
of 15 or fewer hours of usage in one day. Continuous usage
that exceeds 15 hours in one day is not covered by the
warranty.
- Do not use the monitor near heating equipment or in places
where there is likelihood of high temperature, as this may
lead to generation of excessive heat and outbreak of re.
- Do not use the monitor in places where it may be exposed to
direct sunlight.
- The AC outlet shall be installed near the equipment and shall
be easily accessible.
- Do not use in applications where water or other uid may
adhere to the screen. If uid adheres to the screen, the touch
panel may not operate correctly.
- Do not use your nails, touch pens or digitizer pens other
than the one supplied, sharp pencils, or other hard objects to
operate the unit.
- If the pen tip of the digitizer pen is worn or damaged, replace
the pen tip. Failure to do so may scratch the screen or cause
the digitizer pen functions to not operate correctly.
SAFETY INSTRUCTION
The Power Cord and AC Adapter
- Use only the power cord and AC adapter supplied with the
monitor.
- When handling the AC adapter, observe the following:
Incorrect handling may result in re, electric shock, or injury.
Do not drop the AC adapter or subject it to impact.
Never disassemble the AC adapter. It contains high voltage
parts that are dangerous to touch.
The AC adapter is for indoor use only. Do not use it outside.
Do not use the supplied AC adapter with other devices.
- Do not damage the power cord and AC adapter nor place
heavy objects on it, stretch it or over bend it. Also, do not
add extension cords. Damage to the cord may result in re
or electric shock.
- Do not use the power cord with a power tap.
Adding an extension cord may lead to re as a result of
overheating.
- Do not remove or insert the power plug with wet hands.
Doing so could result in electric shock.
- Unplug the power cord if it is not used for a long time.
- Do not attempt to repair the power cord if it is broken
or malfunctioning. Refer the servicing to the service
representative.
- Do not stay in contact with the parts of the product and the
AC adapter that become hot for long periods of time.
Doing so may result in low-temperature burns.
- For your health, observe the following:
If using the monitor continuously, take a 10- to 15-minute
break every hour to rest your eyes.
Do not use the monitor in high-contrast light conditions.
Do not use the monitor in locations where the screen is
subject to direct sunlight.
If a monitor is not positioned in a sufciently stable location, it can be potentially hazardous due to falling. Many injuries,
particularly to children, can be avoided by taking simple precautions such as:
Using xing devices like wall mount brackets recommended by the manufacturer.
Only using furniture that can safely support the monitor.
Ensuring the monitor is not overhanging the edge of the supporting furniture.
• Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the
monitor to a suitable support.
Not standing the monitors on cloth or other materials placed between the monitor and supporting furniture.
Educating children about the dangers of climbing on furniture to reach the monitor or its controls.
SAFETY PRECAUTIONS (Continued)
4
E
Supplied Components
If any component should be missing, please contact your dealer.
Liquid Crystal Display Monitor: 1
Power cord
CD-ROM (Utility Disk): 1
Logo sticker: 1
AC adapter: 1
USB cable (USB-microUSB Type B for touch panel): 1
Setup Manual (this manual): 1
LL-S242A-W only:
Touch pen: 1
Rack stand (front, back, support, xing screws: 2): 1
LL-P202V only:
Digitizer pen: 1
Digitizer pen cable clamper (clamper, xing screw: 1): 1
Variable stand (stand, xing screws: 4, hexagonal wrench): 1
Digitizer pen stand: 1
Digitizer pen spare pen tips: 1
* Purchase a commercially available video cable.
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* Keep packaging for use when transporting monitor, etc.
Applying the Logo Sticker
You can apply the supplied logo sticker to the unit.
Attach as shown in the following diagram, as required.
Power LED
Power LED
Landscape orientation Portrait orientation
ENGLISH
5
E
Binding Cables
Caution
When connecting cables, spread a soft cloth on a stable level surface such as a desk, and gently place the monitor on it with
the screen facing down.
Video cable and USB cable
Secure the video cable (HDMI or DisplayPort) and USB cable using the cable clamp.
1. Remove the cable clamp.
Cable clamp
2. Route the cables through the cable
restraint slot.
Cable restraint
slot
3. Push the cable clamp down into
place.
Cable clamp
Digitizer pen cable
Secure the digitizer pen cable using the supplied clamper and xing screw.
1. Pass the digitizer pen cable through the ring of the clamper.
2. Attach the clamper using the xing screw.
Clamper
Digitizer pen cable
Fixing screw
6
E
Caution
Be sure to turn off the power and disconnect the plug from
the power outlet before connecting/disconnecting cables.
Also, read the manual of the equipment to be connected.
Do not forcibly bend or apply force to cables. Doing so may
result in wire breakage or other damage.
When connecting cables, spread a soft cloth on a stable
level surface such as a desk, and gently place the monitor
on it with the screen facing down.
Do not use any cable that has a damaged or deformed
terminal. Using such cables may cause malfunctions.
Connect USB devices that have the following thicknesses
around the connector area.
1/2 inch (12mm)
1-1/2 inch (38mm)
5/16 inch (8mm)
A
B
C
11/16 inch (17mm)D
D
B
C
A
TIPS
Images may not be displayed properly depending on the
computer (video card) to be connected.
To use the digitizer pen, the necessary software must be
installed on the computer from the supplied CD-ROM.
When connecting a USB device to the USB terminal, use
only USB devices with current consumption of 500mA or
lower.
Connection with a PC
Connect the monitor and a PC using the connection cable.
n
Inputting video and audio
HDMI input terminal
HDMI input terminal
Commercially available HDMI cable
(conforming to the HDMI standard)
To HDMI output
terminal on PC
Check the orientation of the connector and insert it horizontally
as far as it will go.
It is possible to connect the monitor’s HDMI input terminal
to a smartphone or similar MHL-compliant device using a
commercially available MHL cable.
This product supports MHL 1.
Connecting Devices
DisplayPort input terminal
DisplayPort input terminal
Commercially available DisplayPort cable
To DisplayPort output
terminal on PC
Check the orientation of the connector and insert it horizontally
as far as it will go.
TIPS
The length of the signal cables or surrounding environment
may affect the image quality.
The video from the terminal that has signal input is
displayed. In this state, even if a signal is input from the
other terminal, the display is not switched. To switch the
display, use [Input Select] on the menu screen.
If the LCD monitor is turned on when there are input signals
from both terminals, the video from the DisplayPort input
terminal is displayed (factory default).
The terms HDMI and HDMI High-Denition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States
and other countries.
DisplayPort is a registered trademark of Video Electronics
Standards Association.
MHL, the MHL logo, and Mobile High-Denition Link are
trademarks or registered trademarks of MHL, LLC in the
United States and other countries.
n
Using the touch panel
To use the touch panel, connect the monitor to a USB port on
a PC using the supplied USB cable.
USB terminal
Touch panel terminal
Supplied USB cable
To USB port on PC
Check the orientation of the connector and insert it horizontally
as far as it will go.
ENGLISH
7
E
Connecting Devices (Continued)
Connecting USB devices
When using a commercially available mouse, keyboard, or
other device, connect the device to the USB port.
USB terminal
USB cable
Check the orientation of the connector and insert it horizontally
as far as it will go.
Connecting the Monitor to a Power Source
Caution
Use only the AC adapter and power cord supplied with the monitor.
1. Connect the monitor to the power outlet using the supplied AC adapter and power cord.
AC adapter core
Core restrainer
Back of monitor
AC adapter
connection terminal
Power cord
(Supplied)
AC adapter (Supplied)
For power
outlet
2. Push the AC adapter core into the core restrainer.
Connecting the digitizer pen
(LL-P202V)
When using the supplied digitizer pen, connect the digitizer
pen cable.
Digitizer pen connection terminal
Digitizer pen cable
Check the orientation of the connector and insert it horizontally
as far as it will go.
8
E
Installation
You can install the touch display for each monitor in the
following positions.
Installation position LL-S242A-W LL-P202V
Standing
position
Rack stand Yes No
Variable stand
No Yes
Pen writing position No Yes
Horizontal position Yes Yes
Installing on a stand
(Standing position)
n
LL-P202V
Placement on the variable stand
Place the unit on the supplied variable stand.
Caution
The variable stand is designed for placement of the unit in
the landscape orientation. It cannot be used for the portrait
orientation.
When connecting the stand, spread a soft cloth on a stable
level surface such as a desk, and gently place the monitor
on it with the screen facing down.
Applying excessive pressure to the LCD panel with your
hands may result in damage to the unit.
Be careful not to get your ngers caught when adjusting the
angle. There is a risk of injury.
1. Place the variable stand on the rear of the monitor,
insert the xing screws and tighten by hand to position
the stand.
2. Securely tighten the xing screws using the supplied
hexagonal wrench.
3. Place the monitor in the standing position, and adjust
the angle of the stand.
Hold the top of the display with one hand so that it does not
fall over, hold the rear leg of the stand with your other hand,
and adjust the angle of the stand.
The legs can extend about 20 to 75 degrees in relation to
the at surface.
20°
75°
ENGLISH
9
E
Installation (Continued)
n
LL-S242A-W
Placement on the rack stand
Place the unit on the supplied rack stand.
1. Attach the back of the stand to the front.
Position the front and back sides parallel with each other
and attach the hinge.
Back
Front
Front hinge part
Back
Support
Tape
Front
Back hinge part
2. Spread the base of the front and back sides.
3. Peel off the adhesive tape securing the support to the
back side.
Back
Support
Tape
4. Fold down the support, inserting the tabs into the
holes on the front side.
5. Position the stand.
6. Place the monitor in the stand.
Landscape orientation
Run the cables out between the legs of the back side.
10
E
Installation (Continued)
Portrait orientation
Run the cables along the hollow on the front side and out
between the legs of the back side.
7. Secure the monitor to the stand using the two xing
screws.
Landscape orientation
Fixing screws (supplied)
Portrait orientation
Fixing screws (supplied)
Installing on a table
(Pen writing position/Horizontal
position)
Remove the monitor from the stand and place face-down on a
table or other level surface.
Caution
Do not exert a large amount of force on the monitor from
above. Doing so may damage the ap. (LL-P202V)
After removing the monitor from the rack stand, store the
stand so that the screws will not be lost.
n
LL-P202V
Pen writing position
Place the monitor on a table or other level surface.
1. Hold the ap by the depression on the back of the
monitor and pull the ap up.
Depression
2. Place the monitor where you want to use it.
Horizontal position
Place the monitor on a table or other level surface.
Caution
When using the monitor horizontally, use the horizontal tab
in the upright position.
1. Lift up the two tabs on the back of the monitor.
ENGLISH
11
E
Installation (Continued)
Turning Power On/Off
Turning on the power
1. Press the POWER button.
Press
POWER button
Power LED
The power LED turns on.
2. Turn on the PC.
The screen appears.
Status Status of the monitor
Green lit Signal input
Orange lit No signal input
Alternately ashing red and
green
Abnormal temperature
Caution
When switching the POWER button off and back on,
always wait for an interval of at least 5 seconds. Rapid
switching may lead to errors or malfunctions.
High temperatures inside the unit are indicated when the
Power LED is alternately ashing red and green, and may
lead to the power turning off automatically.
For a complete electrical disconnection, pull out the main
plug.
Turning off the power
1. Turn off the PC.
2. Depress the POWER button for around 2 seconds.
Depress for around
2 seconds
POWER button
The power LED turns off.
Caution
If the monitor will not be used for a long time, disconnect
the power plug from the power outlet.
2. Place the monitor where you want to use it.
n
LL-S242A-W
Horizontal position
Place the monitor on a table or other level surface.
1. Simply lay the unit on the desired location.
n
Operation Mode
When the monitor is turned on for the rst time after being shipped from the factory, the operation mode setting screen will be
displayed. Set it to Mode1 or Mode2.
Mode1......If there is no operation for 4 hours or more, the monitor automatically turns off the power.
Mode2......Will perform standard operation.
Even after being set, changes can be made using [Operation Mode], located in the menu of the monitor. (See OPERATION
MANUAL.)
12
E
Specications
Model LL-S242A-W (white) LL-P202V
Power requirement AC 100 V - 240 V, 50/60 Hz (when using the supplied AC adapter),
DC 19 V
Operating temperature 32°F to 95°F (0°C to 35°C)
Operating humidity 20% to 80% (no condensation)
Power consumption 48W (when using supplied AC
adapter)
41W (when using supplied AC
adapter)
Dimensions (excluding protrusions) inch (mm) Approx. 22-5/16 x 1-1/8 x 13-5/16
(566.4 x 28.7 x 338.3) (WDH)
Approx. 18-1/4 x 1 x 10-13/16
(463.8 x 25.2 x 274.8) (WDH)
Weight lbs. (kg)
Approx. 10.58 (4.8) (excluding stand)
Approx. 12.13 (5.5) (including stand)
Approx. 5.07 (2.3) (excluding stand)
Approx. 7.94 (3.6) (including stand)
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement
without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
Printed in China
Imprimé en China
Impreso en Chine
Gedruckt in China
Отпечатано в Китае
14B KS1
TINSM1349MPZZ(1)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Sharp LL-S242A-W Owner's manual

Category
Flat panel accessories
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI