POLYWOOD TWSTWH Operating instructions

without pilot holes

Qty. Description

Model: TWST, BST

Step 1

__(2) Trays

__(2) Leg assembly

Uses (4) 8x3 screws

by resting tray on the leg assemblies

TOOLS NEEDED

A screw gun is required

Phillips head screwdriver

Attach a tray to the middle of the leg assemblies

__(1) Hardware pack

Note:

Trays do not have pilot holes.

Screws go directly into Polywood

ALL HARDWARE IS COATED STAINLESS STEEL

12/4/2012

ASSEMBLY INSTRUCTIONS

A - 8 X 3 PHIL FLAT SCREW

Step 2

Attach other tray to the top of the leg

assemblies.

Uses (4) 8x3 screws

This manual is also suitable for

Download PDF