![](//vs1.manuzoid.com/store/data-gzf/c111d9a0144f69cc55377f823f1e6720/2/000942012.htmlex.zip/bg1.jpg)
without pilot holes
Qty. Description
Model: TWST, BST
Step 1
__(2) Trays
__(2) Leg assembly
Uses (4) 8x3 screws
8
by resting tray on the leg assemblies
TOOLS NEEDED
A screw gun is required
Phillips head screwdriver
Attach a tray to the middle of the leg assemblies
__(1) Hardware pack
Note:
Trays do not have pilot holes.
Screws go directly into Polywood
ALL HARDWARE IS COATED STAINLESS STEEL
12/4/2012
ASSEMBLY INSTRUCTIONS
A - 8 X 3 PHIL FLAT SCREW
Step 2
Attach other tray to the top of the leg
assemblies.
Uses (4) 8x3 screws