POLYWOOD TWSTGY, TWSTMA, TWSTSA, TWSTWH Operating instructions

Hello! I am an AI chatbot trained to assist you with the POLYWOOD TWSTGY Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

without pilot holes

Qty. Description

Model: TWST, BST

Step 1

__(2) Trays

__(2) Leg assembly

Uses (4) 8x3 screws

by resting tray on the leg assemblies

TOOLS NEEDED

A screw gun is required

Phillips head screwdriver

Attach a tray to the middle of the leg assemblies

__(1) Hardware pack

Note:

Trays do not have pilot holes.

Screws go directly into Polywood

ALL HARDWARE IS COATED STAINLESS STEEL

12/4/2012

ASSEMBLY INSTRUCTIONS

A - 8 X 3 PHIL FLAT SCREW

Step 2

Attach other tray to the top of the leg

assemblies.

Uses (4) 8x3 screws