LifeGear 94010 Owner's manual

LifeGear
Brand
LifeGear
Model
94010
Category
Fitness, gymnastics & weight training
Type
Owner's manual
Magnetic Elliptical Trainer
ITEM NO.: 94010
OWNER’S MANUAL
IMPORTANT: Read all instructions carefully before using this product. Retain this
owner’s manual for future reference.
The specifications of this product may vary from this photo and are subject to change without
prior notice.
2018, April
1
TABLE OF CONTENTS
WARRANTY ------------------------------------------------------------------------------- 2
IMPORTANT SAFETY INSTRUCTIONS ------------------------------------------- 3
PARTS LIST ------------------------------------------------------------------------------- 4
HARDWARE LIST AND ASSEMBLY PART --------------------------------------- 6
TOOLS -------------------------------------------------------------------------------------- 7
EXPLODED VIEW ----------------------------------------------------------------------- 8
ASSEMBLY INSTRUCTIONS --------------------------------------------------------- 10
HOW TO MOVE THE ELLIPTICAL TRAINER ------------------------------------ 26
OPERATING THE COMPUTER ------------------------------------------------------ 27
ADJUSTMENTS -------------------------------------------------------------------------- 29
MAINTENANCE -------------------------------------------------------------------------- 30
TROUBLESHOOTING ------------------------------------------------------------------ 30
WARM UP AND COOL DOWN ROUTINE ----------------------------------------- 31
2
ONE YEAR LIMITED WARRANTY
LifeGear Inc. warrants to the original purchaser that this product is free from defects in
material and workmanship when used for the purpose intended, under the conditions that it
has been installed and operated in accordance with LifeGear's Owner's Manual. LifeGear's
obligation under this warranty is limited to replacing or repairing free of charge, any parts
which may prove to be defective under normal home use. This warranty does not include
any damage caused by improper operation, misuse or commercial application.
From the date of purchase, the frame is warranted to be free from defects for 1 (one) year.
This warranty is offered only to the original owner and is not transferable. Proof of
purchase is required.
When ordering replacement parts please have the following information ready:
1. Owner's Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase
3
IMPORTANT SAFETY INSTRUCTIONS
Basic precautions should always be followed, including the following important
safety instructions when using this equipment. Read all instructions before using
this equipment.
1. Read all instructions and follow it carefully before using this equipment. Make sure the
equipment is properly assembled and tightened before use.
2. Before exercise, in order to avoid injuring the muscle, warm-up exercises are
recommended.
3. Please make sure all parts are not damaged and fixed well before use. This
equipment should be placed on a flat surface when using. Using a mat or other
covering material on the ground is recommended.
4. Please wear proper clothes and shoes when using this equipment; do not wear clothes
that might catch any part of the equipment.
5. Do not attempt any maintenance or adjustments other than those described in this
manual. Should any problems arise, discontinue use and consult your local dealer.
6. Be careful when step on or leave the pedal always hold the handlebars first. Make the
pedal at your side at the lowest position, step on the pedal, and stride over the main
frame then step on the other pedal. When using, please hold the handlebar by hands,
make the pedals running smoothly by push or pull handlebars, then run the equipment
regularly by cooperation of hands and feet. After exercise, please also make one
pedal at the lowest position and leave your foot on the higher pedal first and then
another.
7. Do not use the equipment outdoors.
8. This equipment is for household use only. It is not a commercial model.
9. Only one person at a time should use this equipment.
10. If you feel any chest pains, nausea, dizziness, or short of breath, you should stop
exercising immediately and consult your physician before continuing.
11. Care should be taken in mounting or dismounting the equipment.
12. Do not allow children to use or play on the equipment. Keep children and pets away
from the equipment while in use. This machine is designed for adults use only. The
minimum free space required for safe operation is not less than two meters.
13. The maximum weight capacity for this product is 110 kgs.
WARNING: Before beginning any exercise program consult your
physician. This is especially important for people who are over 35 years old or who
have pre-existing health problems. Read all instructions before using any fitness
equipment. Do not operate this exercise equipment without properly fitted guards,
as the moving parts can present a risk of serious injury if exposed.
CAUTION: Read all instructions carefully before operating this product.
Retain this Owner’s Manual for future reference.
4
PARTS LIST
No. Description Qty No. Description Qty
001 Main Frame 1 028
Hexagon Socket Pan Head Cap
Bolt M8x15 (S6)
12
002 Left Handrail Arm 1 029 Big Washer Ø25xØ19x2.0T 4
003 Left Foot Pedal Arm 1 030 Foot Pedal Arm Axle Ø19x174 2
004 Right Foot Pedal Arm 1 031 Washer Ø20xØ8x2.0T 10
005 Roller Arm 2 032
Hexagon Socket Pan Head Cap
Bolt M8x25
4
006 Right Handrail Arm 1 033 Plastic Bushing 2
007 Roller Arm Plate 2 034 Plastic Bushing Ø38xØ19x20 12
008 Rear Base Frame 1 035 Washer Ø5 1
009 Front Post 1 036 Plastic Bushing Ø28.6xØ16x20 4
010 Handlebar Ø25 1 037 Nut M10x1.25xH6 2
011 Left Handrail Ø32 1 038 Crank Cap 2
012 Right Handrail Ø32 1 039 Handlebar End Cap Ø25 2
013 Front Stabilizer 1 040
Handlebar Foam Grip
Ø24xØ31x140
2
014 Front Post Cover 1 041 U-Shape Bracket 2
015 Tension Control Knob 1 042
Powder Metal Bushing
Ø18xØ8x10
4
016 Round Cap Ø38 4 043
Hand Pulse Sensor with Wire
(L=550 mm)
2
017
Hexagon Socket Pan Head Cap
Bolt M8x20 (S6)
13 044 Spacer Ø22x3 4
018 Spring Washer Ø8 20 045 Bearing 6202 4
019 Washer Ø33xØ8x2.0T 4 046 Roller 2
020
Extension Sensor Wire
(L=1000 mm)
1 047 Left Foot Pedal 1
021 Bushing Ø27x11 12 048 Carriage Bolt M8x75 2
022 Round Cap 10 049 Curve Washer Ø25xØ8x2.0T 2
023 Hexagon Head Bolt M8x15 8 050 Axle Ø15x63.8 2
024 Axle Ø16x65.5 2 051 Round End Cap Ø60 4
025 Plastic Bushing Ø32xØ16x20 4 052 Adjustable Leveler M10x30 6
026 Hexagon Head Bolt M8x50 2 053 Hexagon Nut M10 6
027 Idler Wheel 1 054 Screw ST4.2x20 8
5
PARTS LIST
No. Description Qty No. Description Qty
055 Aluminum Track 2 078 Left Crank Cover 1
056 Washer Ø25xØ8x2.0T 8 079 Spring Clip Ø20 2
057 Crank 2 080 Wave Washer Ø20 1
058
Cross Recessed Pan Head Bolt
M5x10
4 081 Bearing 6004ZZ 2
059
Cross Recessed Pan Head Bolt
M5x35
1 082 Sensor with Wire (L=950 mm) 1
060 Curve Washer Ø16xØ8x1.5T 10 083
Cross Recessed Pan Head
Tapping Screw ST2.9x12
2
061 Washer Ø6 1 084 Tension Cable L=1500 mm 1
062 Right Foot Pedal 1 085 Rubber Cover Ø13 2
063 Hexagon Nylon Nut M8 7 086 Hexagon Nut M6 (S10) 2
064 Front Stabilizer End Cap 2 087 Spring Washer Ø6 6
065
Hexagon Socket Pan Head Cap
Bolt M8x35
2 088 Tension Bracket 31x30x1.0T 2
066 Transport Wheel Ø68x20 2 089 Eyebolt M6x36 2
067
Hexagon Socket Pan Head Cap
Bolt M8x49 (S6)
4 090 Nut M10x1.0xH6 2
068 Cap Nut M8 6 091 Flywheel 1
069 Plastic Bushing Ø38xØ32.6x80 2 092
Cross Recessed Pan Head Bolt
M6x15
4
070
Handrail Foam Grip
Ø31xØ37x860
2 093 Belt Pulley 1
071 Handrail End Cap Ø50xØ32 2 094 Belt Pulley Shaft 1
072 Computer (HR-1560) 1 095
Cross Recessed Pan Head Bolt
M6x10
1
073 Wave Washer Ø26xØ19x0.3T 2 096 Hexagon Nylon Nut M6 (S10) 4
074 Right Crank Cover 1 097 Belt PJ400 1
075 Eyebolt M8x65 1 098 Right Cover 1
076
Cross Recessed Pan Head
Tapping Screw ST4.2x20
9 099 Washer Ø8xØ16x1.5T 4
077 Left Cover 1 100 Idler Arm 1
6
(16) Round Cap
4 PCS
(48) Carriage Bolt
2 PCS
(49) Curve Washer
2 PCS
(68) Cap Nut
2 PCS
(18) Spring Washer
2 PCS
(22) Round Cap
10 PCS
(60) Curve Washer
4 PCS
(68) Cap Nut
4 PCS
(67) Hexagon Socket Pan Head Cap Bolt
4 PCS
HARDWARE LIST AND ASSEMBLY PART
7
TOOLS
Multi Hex Tool with Phillips Screwdriver
1 PC
Allen Wrench
1 PC
Double Open End Wrench
2 PCS
8
5
2
16
9
6
7
23
22
22
23
56
17
56
17
58
28
31
28
60
17
18
19
34
34
33
59
35
33
34
34
19
18
17
16
72
22
23
25
3
19
29
30
21
7
31
17
44
45
46
45
44
1
48
51
53
8
55
4
17
31
30
29
19
47
62
15
32
32
52
67
60
68
60
68
67
11
12
70
70
71
71
28
60
10
57
64
52
52
53
53
65
66
63
31
28
69
37
38
82
84
20
20
39
39
40
40
43
76
29
29
18
17
16
18
17
16
18
18
49
68
18
5
18
18
64
14
73
73
57
25
13
66
65
53
52
51
51
54
55
54
43
76
69
25
25
22
37
38
44
45
46
45
44
56
56
24
23
56
24
56
21
21
21
21
34
34
21
34
21
34
21
34
21
21
34
34
21
22
23
56
23
22
56
50
22
23
56
50
23
22
56
42
42
17
56
18
36
36
26
99
63
41
22
17
18
56
41
22
26
99
63
36
36
42
1,9
34
21
EXPLODED VIEW
9
78
54
77
54
90
89
91
89
90
87
88
86
87
88
79
80
81
1
81
79
92
93
94
87
98
54
54
76
85
97
63
99
17
100
27
61
95
75
96
74
76
76
76
76
76
82
83
85
86
82
84
84
EXPLODED VIEW
10
ASSEMBLY INSTRUCTIONS
STEP 1
Remove two Hexagon Socket Pan Head Cap Bolts (28) and two Washers (31) from the
Front Stabilizer (13). Remove bolts with the Allen Wrench provided.
STEP 2
Install two Adjustable Levelers (52) with two Hexagon Nuts (53) onto the Front Stabilizer
(13).
31
28
13
13
13
53
52
53
52
11
STEP 3
Position the Front Stabilizer (13) in front of the Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (13) onto the front curve of the Main Frame (1) with two Hexagon
Socket Pan Head Cap Bolts (28) and two Washers (31). Tighten bolts with the Allen
Wrench provided.
STEP 4
Install four Adjustable Levelers (52) with four Hexagon Nuts (53) onto the Rear Base Frame
(8).
31
28
13
1
31
28
13
1
31
28
13
1
53
52
8
53
52
12
1
48
49
68
18
8
1
48
49
68
18
8
1
48
49
68
18
8
48
68
49
18
(48) Carriage Bolt
2 PCS
(49) Curve Washer
2 PCS
(68) Cap Nut
2 PCS
(18) Spring Washer
2 PCS
STEP 5
Position the Rear Base Frame (8) behind the Main Frame (1) and align bolt holes.
Attach the Rear Base Frame (8) onto the rear curve of the Main Frame (1) with two Carriage
Bolts (48), two Curve Washers (49), two Spring Washers (18), and two Cap Nuts (68).
Tighten cap nuts with the Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
13
STEP 6
Remove eight Hexagon Socket Pan Head Cap Bolts (28), eight Spring Washers (18), and
four Washers (31), and four Curve Washers (60) from the Main Frame (1). Remove bolts
with the Allen Wrench provided.
STEP 7
It is recommended to have a second person assist with this step. One person should hold
the Front Post (9) in place while the other person to connect the wires.
Insert the Tension Cable (84) through into the bottom hole of the Front Post (9) and pull it
out from the square hole of the Front Post (9).
Connect the Sensor Wire (82) from the Main Frame (1) to the Extension Sensor Wire (20)
from the Front Post (9).
28
31
28
60
18
18
84
82
1
1
82
84
1
20
9
20
82
82
84
1
20
9
84
9
14
1
9
9
1
9
28
31
28
60
18
18
60
18
28
31
18
28
STEP 8
Insert the Front Post (9) onto the tube of the Main Frame (1) and secure with eight Hexagon
Socket Pan Head Cap Bolts (28), eight Spring Washers (18), and four Washers (31), and
four Curve Washers (60) that were removed. Tighten bolts with the Allen Wrench provided.
STEP 9
Remove one Cross Recessed Pan Head Bolt (59) and one Washer (35) from the Tension
Control Knob (15). Remove bolt with the Multi Hex Tool with Phillips Screwdriver provided.
59
35
15
15
59
35
84
9
15
A
B
C
D
15 15
15
15
84
84
84
84
9
15
17
18
19
29
9
9
73
STEP 10
Put the cable end of resistance cable of Tension Control Knob (15) into the cable lock of
Tension Cable (84), see Figure A.
Pull the resistance cable of Tension Control Knob (15) up and force it into the slot of metal
bracket of Tension Cable (84), see Figure B.
Insert the metal fitting on the resistance cable of Tension Control Knob (15) into the hole at
the end of the slot in the metal bracket of Tension Cable (84), see Figure C.
Connect the resistance cable of Tension Control Knob (15) to Tension Cable (84) complete,
see Figure D.
Attach the Tension Control Knob (15) onto the Front Post (9) with one Cross Recessed Pan
Head Bolt (59) and one Washer (35) that were removed. Tighten bolt with the Multi Hex
Tool with Phillips Screwdriver provided.
STEP 11
Remove one Hexagon Socket Pan Head Cap Bolt (17), one Spring Washer (18), one
Washer (19), and one Big Washer (29) from the left horizontal axle of the Front Post (9).
Remove bolt with the Allen Wrench provided.
16
9
16
17
18
19
29
73
2
9
17
18
19
29
16
19
2
2
16
(16) Round Cap
1 PC
STEP 12
The Left Handrail Arm (2) is marked with the letter L for the Left.
Slide the Left Handrail Arm (2) onto the left horizontal axle of the Front Post (9) with one
Hexagon Socket Pan Head Cap Bolt (17), one Spring Washer (18), one Washer (19), and
one Big Washer (29) that were removed. Tighten bolt with the Allen Wrench provided.
Install one Round Cap (16) onto the Washer (19).
STEP 13
Remove one Hexagon Socket Pan Head Cap Bolt (17), one Spring Washer (18), one
Washer (19), and one Big Washer (29) from the right horizontal axle of the Front Post (9).
Remove bolt with the Allen Wrench provided.
9
9
19
18
17
29
73
17
41
41
26
99
63
STEP 14
The Right Handrail Arm (6) is marked with the letter R for the Right.
Slide the Right Handrail Arm (6) onto the right horizontal axle of the Front Post (9) with one
Hexagon Socket Pan Head Cap Bolt (17), one Spring Washer (18), one Washer (19), and
one Big Washer (29) that were removed. Tighten bolt with the Allen Wrench provided.
Install one Round Cap (16) onto the Washer (19).
STEP 15
Remove one Hexagon Head Bolt (26), one Washer (99), and one Hexagon Nylon Nut (63)
from the U-Shape Bracket (41). Remove bolt and hexagon nylon nut with two Double
Open End Wrenches provided.
(16) Round Cap
1 PC
19
18
17
16
29
73
9
6
16
19
6
16
17
18
19
29
9
6
18
2
56
23
24
2
23
56
STEP 16
The Left Foot Pedal Arm (3) is marked with the letter L for the Left.
Attach the Roller Arm (5) to the U-Shape Bracket (57) with one Hexagon Head Bolt (26),
one Washer (99), and one Hexagon Nylon Nut (63) that were removed. Tighten bolt and
hexagon nylon nut with two Double Open End Wrenches provided.
Install one Round Cap (22) onto the Hexagon Head Bolt (26).
Place the Roller (46) onto the track of the Rear Base Frame (8).
STEP 17
Remove one Axle (24), two Hexagon Head Bolts (23), and two Washers (56) from the Left
Handrail Arm (2). Remove bolts with two Double Open End Wrenches provided.
5
41
1
3
5
46
8
8
46
99
63
26
22
41
5
(22) Round Cap
1 PC
19
2
3
23
56
22
22
56
23
24
24
2
3
2
3
(22) Round Cap
2 PCS
STEP 18
Attach the Left Foot Pedal Arm (3) onto the bottom end of the Left Handrail Arm (2) with one
Axle (24), two Hexagon Head Bolts (23), and two Washers (56) that were removed. Tighten
bolts with two Double Open End Wrenches provided.
Install two Round Caps (22) onto the both Hexagon Head Bolts (23).
STEP 19
Remove one Hexagon Head Bolt (26), one Washer (99), and one Hexagon Nylon Nut (63)
from the U-Shape Bracket (41). Remove bolt and hexagon nylon nut with two Double
Open End Wrenches provided.
41
1
41
26
99
63
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33

LifeGear 94010 Owner's manual

LifeGear
Brand
LifeGear
Model
94010
Category
Fitness, gymnastics & weight training
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents