Home Decorators Collection AC421LKLED is a universal ceiling fan LED light kit with a 14w LED light kit assembly and glass shade. It's suitable for indoor use only and should not be installed in damp or wet locations.
To install the light kit, you'll need a variety of tools including a Phillips screwdriver, electrical tape, wire cutter, and a step ladder. The package includes a nut, lock washer, rubber washer, glass secure nut, glass cap, and decorative nut.
To prepare the fan, remove the switch housing cover and plastic plug. Route the light kit wires through the hole in the switch housing cover and screw the cover onto the light kit stem. Attach the light kit to the switch housing, making sure to push all wires back into the switch housing.
Home Decorators Collection AC421LKLED is a universal ceiling fan LED light kit with a 14w LED light kit assembly and glass shade. It's suitable for indoor use only and should not be installed in damp or wet locations.
To install the light kit, you'll need a variety of tools including a Phillips screwdriver, electrical tape, wire cutter, and a step ladder. The package includes a nut, lock washer, rubber washer, glass secure nut, glass cap, and decorative nut.
To prepare the fan, remove the switch housing cover and plastic plug. Route the light kit wires through the hole in the switch housing cover and screw the cover onto the light kit stem. Attach the light kit to the switch housing, making sure to push all wires back into the switch housing.
Home Decorators Collection AC421LKLED is a universal ceiling fan LED light kit with a 14w LED light kit assembly and glass shade. It's suitable for indoor use only and should not be installed in damp or wet locations.
To install the light kit, you'll need a variety of tools including a Phillips screwdriver, electrical tape, wire cutter, and a step ladder. The package includes a nut, lock washer, rubber washer, glass secure nut, glass cap, and decorative nut.
To prepare the fan, remove the switch housing cover and plastic plug. Route the light kit wires through the hole in the switch housing cover and screw the cover onto the light kit stem. Attach the light kit to the switch housing, making sure to push all wires back into the switch housing.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI