Wacker Neuson PG3A is a centrifugal pump designed for dewatering applications. It is powered by a Honda GX160 engine and features a 3-inch discharge port and suction port. The pump can handle solids up to 3/8 inch in diameter and has a maximum flow rate of 150 gallons per minute. It is also self-priming, so it can be used to pump water from flooded areas or other sources that are below the level of the pump.
Wacker Neuson PG3A is a centrifugal pump designed for dewatering applications. It is powered by a Honda GX160 engine and features a 3-inch discharge port and suction port. The pump can handle solids up to 3/8 inch in diameter and has a maximum flow rate of 150 gallons per minute. It is also self-priming, so it can be used to pump water from flooded areas or other sources that are below the level of the pump.
Wacker Neuson PG3A is a centrifugal pump designed for dewatering applications. It is powered by a Honda GX160 engine and features a 3-inch discharge port and suction port. The pump can handle solids up to 3/8 inch in diameter and has a maximum flow rate of 150 gallons per minute. It is also self-priming, so it can be used to pump water from flooded areas or other sources that are below the level of the pump.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI