Nail 6" o.c.
1" Lap Joint with Sealant
Gravel Stop
without Cleat
Typical Installation
Gravel
Cap Sheet
Gravel Stop Flashing
Base Sheet
Minimum 1 ¼"
Ring Shank
Roong Nail
GRAVEL STOP FLASHING
INSTALLATION GUIDELINES
These installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed professional, and to
check with your local building inspector or building permit office for approvals and possible variations that may apply.
CAUTION!
Working above grade is inherently dangerous, be sure that proper fall protection measures are in place.
When working with power tools and sheet metal, gloves and eye protection are absolutely required.
-
1
Construction Metals CS34G Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Arrow EZ6565LVCRCC User manual
-
Spacemaker VERSA-SHED EVRS63 Owner's Manual & Assembly Manual
-
-
Arrow EZ8772HVCR User manual
-
-
Cedarshed B84 Installation guide
-
-
-
Arrow Storage Products EZ6565LVCRCC Owner's manual
-
