PAC GMK381 User manual

Category
Car kits
Type
User manual

This manual is also suitable for

PAC BKGMK381 is a vehicle-specific mounting kit designed to ease the installation of aftermarket stereos into select Buick, Chevy, Hummer, Pontiac, and Saturn vehicles manufactured between 2005 and 2013. It is compatible with single ISO mount and double DIN mount stereos, allowing for a wide range of aftermarket options.

The kit includes ISO brackets, mounting brackets, and screws to securely mount the new stereo in place. Additionally, a back strap is included to provide optional support for the rear of the radio component.

To use the kit, simply insert the ISO brackets into the rear of the kit, remove the center rib for double DIN radios, and attach the left and right mounting brackets. Insert the radio between the brackets and loosely attach it with screws. Slide the radio forward or backward for the desired look and tighten the screws.

PAC BKGMK381 is a vehicle-specific mounting kit designed to ease the installation of aftermarket stereos into select Buick, Chevy, Hummer, Pontiac, and Saturn vehicles manufactured between 2005 and 2013. It is compatible with single ISO mount and double DIN mount stereos, allowing for a wide range of aftermarket options.

The kit includes ISO brackets, mounting brackets, and screws to securely mount the new stereo in place. Additionally, a back strap is included to provide optional support for the rear of the radio component.

To use the kit, simply insert the ISO brackets into the rear of the kit, remove the center rib for double DIN radios, and attach the left and right mounting brackets. Insert the radio between the brackets and loosely attach it with screws. Slide the radio forward or backward for the desired look and tighten the screws.

GMK381 Mounting Kit
Buick
2005-07 TERRAZA
Chevy
2005-13 CORVETTE
2005-08 UPLANDER
Hummer
2005-10 H3
2009-10 H3T
Pontiac
2005-06 MONTANA SV6
Saturn
2005-07 RELAY
VEHICLE APPLICATIONS
CUSTOMER HELP LINE
USA 800-323-4329 Canada 800-245-8777
iGMK381
©2015 AMERICAN INTERNATIONAL INDUSTRIES, INC.
TECH Ver. 4/15 PRINT Ver. 4/15
2500 East Francis Street Ontario, CA 91761, U.S.A.
USA Sales (800) 336-6500
Canada Sales (888) 922-3006
For information about other American International automotive
accessories visit our website at:
http://www.aius.net
1. Carefully unclip the trim from around the radio/Climate controls and remove.
(Use of a panel removal tool, or a right angle scribe tool is recommended).
2. Remove the (8) 9/32 or Phillips screws securing the Radio and Climate controls to
the sub-dash.
3. Pull the Radio and Climate controls forward, lower and set the climate control out of
the way, disconnect the wire harnesses and antenna lead from the rear of the factory
radio and remove radio.
DASH DISASSEMBLY INSTRUCTIONS
3
1. Insert ISO brackets to rear of kit as shown in Figure A (Pg 3).
2. Insert pocket into lower section of kit from rear & lock into slots of mounting brackets.
3. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible or screws supplied with kit.
4. Slide radio forward or backward for desired look and tighten screws.
5. Attach a rear support bracket to the rear of the new radio and adjust as necessary
to support the weight of the radio (Optional)
Continued on Next Page
SINGLE ISO MOUNT INSTALLATION INSTRUCTIONS
Fig. B
1. Remove center rib shown in Fig. B for double DIN radios only.
2. Attach left and right mounting brackets to the kit as shown in Figure C.
3. Insert ISO mountable radio between ISO mount brackets and loosely attach to
sides of radio using screws provided with radio when possible or screws supplied
with kit.
4. Slide radio forward or backward for desired look and tighten screws.
5. Support the rear of the radio component with back strap (optional).
DOUBLE DIN MOUNT INSTALLATION INSTRUCTIONS
2
005-07 BUICK TERRAZA / 2005-08 CHEVY UPLANDER
2005-06 PONTIAC MONTANA SV6 / 2005-07 SATURN RELAY
1. Carefully remove trim from around radio.
2. Remove (4) 9/32 screws securing factory radio and climate controls to the sub-dash
3. Lay climate controls out of the way.
4. Pull radio and climate controls forward, disconnect all harnesses from radio and
remove radio.
DASH DISASSEMBLY
2005-10 HUMMER H3/ 2009-10 HUMMER H3T
1. Carefully lift up and remove the Ride Control switch/ cover plate located at the base
of the center console, behind the Shifter.
2. Remove the (2) 9/32 screws located beneath the Ride Control/cover plate.
3. Carefully unfasten and remove the entire Radio/Climate Control trim bezel.
4. Remove the (4) 9/32 screws securing the radio to the sub-dash.
5. Pull the radio forward, disconnect all attached harnesses and antenna lead and
remove radio.
DASH DISASSEMBLY
2005-12 CHEVROLET CORVETTE
Fig. A
Remove shaded tabs
on left and right sides
of the brackets
  • Page 1 1
  • Page 2 2

PAC GMK381 User manual

Category
Car kits
Type
User manual
This manual is also suitable for

PAC BKGMK381 is a vehicle-specific mounting kit designed to ease the installation of aftermarket stereos into select Buick, Chevy, Hummer, Pontiac, and Saturn vehicles manufactured between 2005 and 2013. It is compatible with single ISO mount and double DIN mount stereos, allowing for a wide range of aftermarket options.

The kit includes ISO brackets, mounting brackets, and screws to securely mount the new stereo in place. Additionally, a back strap is included to provide optional support for the rear of the radio component.

To use the kit, simply insert the ISO brackets into the rear of the kit, remove the center rib for double DIN radios, and attach the left and right mounting brackets. Insert the radio between the brackets and loosely attach it with screws. Slide the radio forward or backward for the desired look and tighten the screws.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI