DKS Chain Stop User manual

Chain and Gate Connection Accessory Kit

2840-065-B-12-08

DoorKing Part Numbers

2600-849, 2600-852

Accessories to connect a slide gate operator to a sliding gate with #40 or #41 chain.

120 Glasgow Avenue

Inglewood, California 90301

U.S.A.

Chain stop

installation

at end of gate.

Chain stop installed

at opposite end.

Rubber bumper faces towards gate operator.

Slides into grove.

Slides around chain.

Fits between chain links.

Master Link

Rubber Bumper

Chain Bracket Nut

20 ft. #41 Chain 20 ft. #40 Chain

Adjust the chain by tightening the chain bracket nuts. The chain

should sag no more than one (1) inch per 10 feet of chain travel.

Do not over tighten the chain.

To order extra chain:

10 ft. #41 chain. - P/N 2600-443

10 ft. #40 chain. - P/N 2600-444

hain Bracket

Kit Includes:

1. 20 ft. of chain with (2) master links.

2. (2) Chain stop assemblies.

3. (2) Chain brackets with chain connectors.

This manual is also suitable for

Download PDF