1 IPC-SND-03
Desk Top Stand
IPC-SND-03 User’s Guide
CONTEC CO.,LTD.
Thank you for purchasing the CONTEC product.
Check, with the following list, that your package is complete. If you discover damaged or missing items,
contact your retailer.
Product Configuration List
- Stand [IPC-SND-03]… 1 - Flat-head screws (M4 x 6)...4
- This User’s Guide (this booklet)…1 - Hex-nut (M4)...4
- Attachment[IPC-SND-AT1]...1 - Spring washer (M4)...4
- 3-piece sems screws (M4 x 8)...4 - Flat-washer (M4)...4
WARNING
Indicates dos and don'ts that are assumed to result in possible death or serious injury if they are
inappropriately handled ignoring this icon.
Please do not establish it in an unstable place. There is the danger that falls.
External Dimensions and Component Identification
200
140
140
200
114
100
100
114
(182)
(179.5)
2-
φ
4.5 x 6
115
15
2-φ4.5
Back:4-M4 [The engage of screw is 4mm maximum.]
0
~
1
1
0
°
IPC-SND-03 User’s Guide
Installation Procedure
For VESA 100mm
The angle adjustment lock screw.
(Loosen the screw and adjust angle.)
M4 Screw
IPC-SND-03
IPC-SND-AT1
M4 Nut / Washer /
SpringWasher
F
o
r
V
E
S
A
7
5
m
m
The angle adjustment lock screw.
(Loosen the screw and adjust angle.)
For VESA 75mm
Fixing “75mm VESA Attachment(IPC-SND-AT1)” on PANEL-PC which is included in ,
and fix to STAND (IPC-SND-03) using Nut, Washer and SpringWasher.
Copyright 2002 CONTEC CO., LTD. ALL RIGHTS RESERVED.
CONTEC CO., LTD. December 2003 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/
English http://www.contec.com/
Chinese http://www.contec.com.cn/
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD. [12092003]
[01152002] Management No. A-46-601
[12092003_rev2] Parts No. LYAX131
/