Tripp Lite 1U Rackmount Console (for KVM Switch or Server) Owner's manual

Brand: Tripp Lite

Model: 1U Rackmount Console (for KVM Switch or Server)

Category: Rack consoles

Type: Owner's manual

Owner’s Manual

1U Rackmount Console

(for KVM Switch or Server)

Model:

B021-000-19-HD

Series No:

AGCB6533

1111 West 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Package Contents

Features

• Rackmount console (LCD monitor, keyboard, touch pad) in an integrated 1U rackmountable housing

• Sleep mode when the monitor cover is closed

• Rackmountable in standard 19-inch rack (1U)

• Includes rackmount brackets

• Supports resolutions up to 1366 x 768 pixels

• Includes a USB 2.0 Pass-Through port which can be used to provide easy access to a USB port on a connected device

(KVM switch or computer)

• Includes a DVI-I port for connecting to a DVI or VGA* server or KVM switch

*VGA server connection using the included DVI-to-VGA adapter

SAVE THESE INSTRUCTIONS

This manual contains important instructions that should be followed during the installation and operation of the rackmount console

described in this manual. Read all instructions thoroughly before attempting to install or operate the rackmount console. Failure to comply

will void the warranty and could damage the rackmount console or connected equipment.

WARNING:

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the

life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence

of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

Español p. 5 Français p. 9

• 1U Rackmount Console

• KVM Cable Kit (DVI-I, USB)

• DVI (Female) to VGA (Male) Adapter

• AC Power Cord

• Owner’s Manual

• Mounting Brackets

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $50 value!

www.tripplite.com/warranty

Introduction

Front View

Handle: Pull to slide the module out; push to slide the

module in.

LCD Monitor: After sliding the module out, flip up the cover to

access the LCD monitor, keyboard and touch pad.

Keyboard

Rackmounting Brackets: The brackets secure the chassis to

a standard 19-inch rack or rack enclosure.

2-Button Touchpad: Press the left button to left-click, press

the right button to right-click. Scroll up and down the screen by

running finger up or down the far right side of the touchpad.

Console and LCD Controls: The controls located here include

the console power On/Off button, and the buttons used to

control the position and picture setting of the LCD display.

Pass-Through USB Port: This port is inactive until a USB A

Male/Male cable (Tripp Lite model UR020-Series) is used to

connect the Pass-Through port on the back of the console to a

USB port on a computer or KVM switch. When active, a USB

device connected to the front of the console will then be

available for use with the connected computer or KVM switch.

Rear View

Console Port Section: Connects the console to your server or

KVM switch with the included KVM cable kit.

Power Socket: The AC power cord plugs in here.

Pass-Through USB Port: This port is connected to the Pass-

Through USB port on the front of the console. The front Pass-

Through port is active when a USB A Male/Male cable (Tripp Lite

model UR020-Series) is connected between the Pass-Through

port on the back and a USB port on a KVM or server.

Rackmounting

Tripp Lite's 1U Rackmount Console is designed for mounting in a 1U

rack system. The various mounting options are explained in the

sections that follow.

Standard 4-Post Rackmounting

The standard rackmounting brackets that come attached to the unit

allow it to be installed in standard 1U racks by a single individual.

Slide out the rear mounting brackets from the console and

mount both brackets (separate from the console) to the inside

rear of a standard 1U rack system using user-supplied screws.

Take the console and gently slide it into the two rear-mounted

brackets in the rack and secure the console in place by inserting

user-supplied screws.

2-Post Rackmounting

The console can also be mounted in a 2-post rack using the

optional 2-Post Rackmount Kit (Tripp Lite model B019-000). The

mounting hardware allows for the console to be opened with the

drawer in any position. The kit provides added stability and prevents

the console frame from twisting. See the B019-000 Owner's Manual

for detailed mounting instructions.

12 3

Refer to the installation diagrams below as you perform these steps.

Note: Make sure that the power to the computer or KVM switch being connected to the console is powered off before proceeding with the installation.

Using the included cable kit, connect the DVI connector marked CONSOLE to the DVI port on the back of the console.

Connect the DVI connector marked SERVER to the DVI port on your server or KVM switch.

Note: If you are connecting to a computer with a VGA port, use the included DVI-I to VGA adapter. If your server or KVM switch uses a DVI-D port, you will need a

DVI-I to DVI-D adapter such as Tripp Lite’s P118-000 (sold separately).

Connect the USB connector on the SERVER side of the included cable kit to a USB port on your server or KVM switch.

Note: Although KVM switches contain two USB console ports for keyboard and mouse, you can plug the cable kit’s USB connector into either port.

Remove the USB covers from each of the Pass-Through USB ports. Connect the Pass-Through USB port on the back of the console to a

USB port on a computer or KVM switch using a USB A Male/Male cable, such as Tripp Lite’s UR020-Series. Connect a USB device to the

Pass-Through USB port on the front of the console.

Note: The Pass-Through ports do not connect to the internal components in the console (the keyboard, the touchpad or the console).

Connect the power cord to the socket on the back of the console, and then plug it into a Tripp Lite Surge Protector, Power Distribution Unit

(PDU), or Uninterruptible Power Supply (UPS).

Power on the connected computer or KVM switch.

Turn on the LCD screen by pressing the On/Off button on the control panel of the built-in monitor.

Computer Installation

Note: The diagram below shows the connection of a computer with PS/2 keyboard and mouse ports. To connect to a USB computer, use the PS/2 to USB adapter

provided with the console.

Function Specification

Connectors

Console 1 x DVI-I female

Cable Kit 1 x DVI-I male to 1 x DVI-I male, 1 x USB male

Power 1 x IEC-60320-C14 AC socket (100-240V~, 50/60Hz)

Comm. 1 x USB (Type A to Type A)

LCD Resolution 1366 x 768; DDC2B

Environment

Operating Temperature: 32°- 104°

Storage Temperature: -4°- 140°

Humidity: 0 - 80% RH Noncondensing

Housing Metal

Weight 30.8 lbs.

Dimensions (L x W x H) 28 x 19 x 1.7 in.

Installation

Specifications

KVM Installation

Note: The diagram below shows the connection of a B042-016 KVM switch. The console ports of different model KVM switches may be located elsewhere on

the unit.

Computer Installation

KVM Installation

1-YEAR LIMITED WARRANTY

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP

LITE's obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must

obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an

authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of

date and place of purchase. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or

modified in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may

not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES

ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs,

such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or

otherwise.

Product Registration

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to win a FREE

Tripp Lite product! *

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

FCC Notice, Class A

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense. The user must use shielded cables and connectors with this equipment. Any changes or modifications

to this equipment not expressly approved by Tripp Lite could void the user's authority to operate this equipment.

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number

can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this

product, always refer to the series number. The series number should not be confused with the marking name or model number of the product.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic

equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)

• Send the new equipment back for recycling when this ultimately becomes waste

Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice.

Warranty and Product Registration

1111 West 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Page is loading ...