Honeywell RTH6450D1009/A Datasheet

Operating

Manual

RTH6350/RTH6450/RET93E0/RET95E0 Series

Programmable Thermostat

69-2415ES-05

Read and save these instructions.

Need Help?

For assistance with this product please visit http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502

® U.S. Registered Trademark.

US Patent No. D542,677 and other patents pending

M28400

Quick Reference Card

Grasp and pull to see basic

operating instructions at a

glance.

Battery Holder

Press down and pull to

remove batteries.

Batteries should be

replaced once a year

(see page 15).

NOTE: Remove battery holder; model number is on the battery holder.

This manual covers the RTH6350, RTH6450, RET93E0, and RET95E0 models.

RTH6350/RTH6450/RET93E0/RET95E0 Series

1 69-2415ES—05

About your new thermostat

Thermostat features ...................................2

Programming at a glance ..........................3

Quick reference to controls ....................... 4

Quick reference to display ........................5

Programming & Operation

Set time and day ........................................6

Select fan setting (auto/on) ...................... 7

Select system setting (heat/cool)..............8

Using program schedules .........................9

Program schedule overrides ...................13

Auto Changeover

(RTH6450 and RET95E0 only) .................15

Built-in compressor protection ...............17

Smart Response

®

Technology .................18

Appendices

Battery installation ................................... 19

Customer assistance ............................... 20

In case of difficulty...................................21

Limited warranty ......................................23

This thermostat is ready to go!

Your new thermostat is pre-programmed

and ready to go.

See page 3 to check settings.

Table of contents

Operating Manual

69-2415ES—05 2

About your new thermostat

Congratulations on the purchase of your new Honeywell thermostat. It has been

designed to give you many years of reliable service and easy-to-use, push-button

climate control.

Features

• Easy-to-followmenuprogramming.

• One-touchtempcontroloverridesprogramscheduleatanytime.

• Large,clear,backlitdisplayiseasytoread—eveninthedark.

• Displaysbothroomtemperatureandtemperaturesetting.

• Removablebatteryholderforfast,easyreplacement.

• Built-incompressorprotection.

RTH6350/RTH6450/RET93E0/RET95E0 Series

3 69-2415ES—05

This thermostat is ready to go!

Your new thermostat is pre-programmed and ready to go. All you have to do is set the

time and day. Then check the settings below and change if needed:

1. Set time and day (required for proper operation) .........................See page 6

2. Select fan setting (Auto/On): Preset to Auto .................To change, see page 7

3. Select system setting (Heat/Cool): Preset to Heat ......To change, see page 8

4. Program schedules: Preset to energy-saving levels

while you’re at work or asleep (assumes you wake at

6 am, leave at 8 am, return at 6 pm and go to bed

at 10 pm) ......................................................................To change, see pages 9-11

ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time, and

manually adjust the temperature (see pages 12-13).

Operating Manual

69-2415ES—05 4

Quick reference to controls

M28401

Digital display (see page 5). Battery holder (see page 15).

Temperature buttons

Press to adjust temperature

settings (see pages 11-13).

Hold button

Press to override programmed

temperature control (see page 13).

Function buttons

Press to select the function displayed just above each button.

(Functions change depending on the task.)

RTH6350/RTH6450/RET93E0/RET95E0 Series

5 69-2415ES—05

Quick reference to display screen

Set Clock/Day/

Schedule

Auto

Wake Wed

Fan System

Heat On

Heat

Setting

Inside

AM

75

6

:

30

Replace Battery

M28402

In Recovery

Current inside temperature

Current program period

Wake/Leave/Return/Sleep

(see pages 9-11)

Set clock/day/schedule

Press to set time, day or

program schedules (see

pages 6 & 11)

Function buttons

Press the button beneath each function to view or change

settings (functions change depending on the task)

Low battery warning

(see page 15)

Current time/day

(see page 6)

Temperature setting

(see pages 11-13)

System status

Onwhen“calling”for

heating or cooling;

flashes when waiting for

compressor restart (see

page 14)

System setting

Heat/Cool/Off

(see page 8)

Fan setting

Auto/On(seepage7)

Smart Response

®

technology in effect

(see page 17)

Operating Manual

69-2415ES—05 6

M28404

Wed

Set Day Set Schedule

Done

PM

4

:

30

Set Clock/Day/

Schedule

Auto

Fan System

Heat

M28403

Set the time and day

1. Press the SET CLOCK/DAY/SCHEDULE

button, then press

s or t to set

the clock time.

2. Press the SET DAY button, then

press

s or t to select the day of

the week.

3. Press DONE to save & exit.

Note: If the SET CLOCK/DAY/SCHEDULE

option is not displayed, press DONE or

RUN SCHEDULE.

Note: If the display flashes Set Clock, the

thermostat will follow your settings for

theweekday“Wake”timeperioduntilyou

reset the time and day.

Press SET CLOCK/DAY/SCHEDULE, then adjust time

Press SET DAY, then select current day

RTH6350/RTH6450/RET93E0/RET95E0 Series

7 69-2415ES—05

Select the fan setting

Press the FAN button to select Auto or On.

In“Auto”mode(themostcommonlyused

setting), the fan runs only when the heat-

ingorcoolingsystemison.Ifsetto“On,”

the fan runs continuously.

M28405

Set Clock/Day/

Schedule

Auto

Fan System

Heat

M28406

Set Clock/Day/

Schedule

On

Fan System

Heat

Operating Manual

69-2415ES—05 8

Select the system setting

Press the SYSTEM button to select Heat, Cool or

Off.

• Heat: Thermostat controls only the heating

system.

• Cool: Thermostat controls only the cooling

system.

• Off: Heating and cooling systems are off.

• Auto (RTH6450 and RET95E0 only):

Thermostat automatically selects heating or

cooling depending on the indoor temperature.

CAUTION: EQUIPMENT DAMAGE

HAZARD. To prevent possible

compressor damage, do not operate

cooling system when outdoor

temperature is below 50 °F (10 °C).

Note: The Auto setting may not

appear, depending on how your

themostat was installed.

M28407

Set Clock/Day/

Schedule

Auto

Fan

System

Heat

M28408

Set Clock/Day/

Schedule

Auto

Fan

System

Cool

RTH6350/RTH6450/RET93E0/RET95E0 Series

9 69-2415ES—05

Save money by setting program schedules

It’s easy to program your system for maximum energy savings. You can program four

time periods each day, with different settings for weekdays, Saturday and Sunday.

Set to the time you awaken and the temperature you want

during the morning, until you leave for the day.

Set to the time you leave home and the temperature you

want while you are away (usually an energy-saving level).

Set to the time you return home and the temperature you

want during the evening, until bedtime.

Set to the time you go to bed and the temperature you want

overnight (usually an energy-saving level).

WAKE

6:00 am

70

°

LEAVE

8:00 am

62

°

RETURN

6:00 pm

70

°

SLEEP

10:00 pm

62

°

Operating Manual

69-2415ES—05 10

Energy-saving settings for maximum cost savings

This thermostat is pre-set with energy-saving program settings. We recommend these

settings, since they can reduce your heating/cooling expenses by as much as 33%.

(See next page to adjust times and temperatures of each time period.)

Wake

(6:00 am)

Leave

(8:00 am)

Return

(6:00 pm)

Sleep

(10:00 pm)

Cool (Mon-Fri)Heat (Mon-Fri) Heat (Sat-Sun) Cool (Sat-Sun)

70

°

75

°

70

°

75

°

62

°

83

°

62

°

[Orcancelperiod]

83

°

[Orcancelperiod]

70

°

75

°

70

°

[Orcancelperiod]

75

°

[Orcancelperiod]

62

°

78

°

62

°

78

°

RTH6350/RTH6450/RET93E0/RET95E0 Series

11 69-2415ES—05

To adjust program schedules (RTH6350 and RET95E0 only)

1. Press SET CLOCK/DAY/SCHEDULE, then SET

SCHEDULE.

2. Press s or t to set your weekday Wake

time (Mon–Fri), then press NEXT.

3. Press s or t to set the temperature for this

time period, then press NEXT.

4. Set time and temperature for the next time

period (Leave). Repeat steps 2 and 3 for each

weekday time period.

5. Press NEXT to set weekend time periods (Sat-

Sun), then press DONE to save & exit.

Note: Make sure the thermostat is set to the system

you want to program (Heat or Cool).

Note: You can press CANCEL PERIOD to eliminate

unwanted time periods (except Wake).

M28409

Set Clock/Day/

Schedule

Auto

Fan System

Heat

Set Day Set Schedule

Done

Mon Tue Wed Thu FriLeave

Set Schedule

Heat

Setting

AM

62

8

:

00

Done

CancelPeriod

Operating Manual

69-2415ES—05 12

About your new thermostatTo adjust program schedules (RTH6450 and RET95E0 only)

1. Press SET CLOCK/DAY/SCHEDULE, then SET

SCHEDULE.

2. Press s or t to set your weekday Wake

time (Mon–Fri), then press NEXT.

3. Press s or t to set the temperature for this

time period, then press NEXT.

4. Set time and temperature for the next time

period (Leave). Repeat steps 2 and 3 for each

weekday time period.

5. Press NEXT to set Saturday time periods.

6. Press NEXT to set Sunday time periods, then

press DONE to save & exit.

Note: Make sure the thermostat is set to the system

you want to program (Heat or Cool).

Note: You can press CANCEL PERIOD to eliminate

unwanted time periods (except Wake).

M28409

Set Clock/Day/

Schedule

Auto

Fan System

Heat

Set Day Set Schedule

Done

Mon Tue Wed Thu FriLeave

Set Schedule

Heat

Setting

AM

62

8

:

00

Done

CancelPeriod

RTH6350/RTH6450/RET93E0/RET95E0 Series

13 69-2415ES—05

About your new thermostat

M28410

Heat

Setting

Inside

AM

69

75

6

:

30

Temporary

Run Schedule

Auto

Fan System

Heat

Program schedule override (temporary)

Press s or t to immediately adjust

the temperature. This will temporarily

override the temperature setting for the

current time period.

The new temperature will be

maintained only until the next

programmed time period begins (see

page 10). For example, if you want to

turn up the heat early in the morning, it

will automatically be lowered when you

leave for the day.

To cancel the temporary setting at any

time, press RUN SCHEDULE.

Press to cancel temporary setting and

resume program schedule.

Note: Make sure the thermostat is set

to the system you want to control (heat

or cool).

Press to temporarily adjust temperature.

Operating Manual

69-2415ES—05 14

About your new thermostat

M28411

Heat

Setting

Inside

AM

69

75

6

:

30

Run Schedule

Auto

Fan System

Heat

Hold

Program schedule override (permanent)

Press HOLD to permanently adjust

the temperature. This will override

the temperature settings for all time

periods.

The“Hold”featureturnsoffthe

program schedule and allows you

to adjust the thermostat manually,

as needed.

Whatever temperature you set will

be maintained 24 hours a day until

you manually change it, or press

RUN SCHEDULEtocancel“Hold”and

resume the programmed schedule.

Presstocancel“Hold”settingand

resume program schedule.

Note: Make sure the thermostat is set

to the system you want to control (heat

or cool).

Press to permanently adjust temperature.

RTH6350/RTH6450/RET93E0/RET95E0 Series

15 69-2415ES—05

About your new thermostat

Use this feature in climates where both air conditioning and heating are used on the

same day. When the system mode is in Auto, the thermostat automatically selects

heating or cooling depending on the indoor temperature.

While in the Auto mode, if a schedule override takes place (temporarily or perma-

nently) the thermostat will automatically adjust the cooling and heating settings to

maintain a 3-degree separation between the cool and heat settings.

For example, if the heat temperature is raised to where it gets within 3-dgrees of the

coolsetting,thedisplaywillshowanuparrownextto“cool”toshowthethermostat

is raising the cool setting up to maintain a 3-dgreee separation.

Press the Select Heat/Cool button to select between the heat and cool to view/adjust

either mode.

Auto Changeover (RTH6450 and RET95E0 only)

Operating Manual

69-2415ES—05 16

About your new thermostat

If the cool temperature is lowered to where it gets close to the heat setting, an arrow

next to heat will show the thermostat is lowering the heat setting down to maintain a

3-degree separation.

Auto Changeover (RTH6450 and RET95E0 only)

CAUTION: To avoid possible compressor damage, do not use Auto

Changeover if the outside temperature drops below 50ºF (10ºC).

Run Schedule

Auto

Cool

Fan

Select

Heat/Cool

Heat

Setting

Inside

PM

73

1

:

05

Temporary

M27477

Press Select Heat/Cool to set the heat or cool

temperature.

The triangle indicates the cool temperature is

increasing to maintain 3 degrees between heat

and cool settings.

RTH6350/RTH6450/RET93E0/RET95E0 Series

17 69-2415ES—05

About your new thermostat

M28412

Cool On

Cool

Setting

Inside

AM

75

6

:

30

Set Clock/Day/

Schedule

Auto

Fan System

Cool

Built-in compressor protection

This feature helps prevent damage to the

compressor in your air conditioning or heat

pump system.

Damage can occur if the compressor is

re-started too soon after shutdown. This

feature forces the compressor to wait a few

minutes before restarting.

During the wait time, the display will flash

the message CoolOn (or HeatOn if you have

a heat pump). When the safe wait time has

elapsed, the message stops flashing and the

compressor turns on.

Message flashes until safe restart

time has elapsed.

Operating Manual

69-2415ES—05 18

About your new thermostat

Smart Response

®

Technology: This feature

allowsthethermostatto“learn”howlong

the furnace and air conditioner take to reach

programmed temperature settings, so the

temperature is reached at the time you set.

For example: Set the Wake time to 6 am, and

the temperature to 70°. The heat will come

on before 6 am, so the temperature is 70°

bythetimeyouwakeat6.Themessage“In

Recovery”isdisplayedwhenthesystemis

activated before a scheduled time period.

Smart Response

®

Technology

M27476

Cool On

Cool

Setting

Inside

AM

75

6

:

38

Set Clock/Day/

Schedule

Auto

Fan System

Cool

In Recovery

Displays when Smart Response is active.

Page is loading ...

Honeywell RTH6450D1009/A Datasheet

This manual is also suitable for

Honeywell RTH6450D1009/A Datasheet

in other languages

Related papers

Other documents