SPEEDLINK GLANCE Screen Protection Kit, SL-3453 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the SPEEDLINK GLANCE Screen Protection Kit Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Anbringen der
Schutzfolie
Applying the
Screen Protection
© 2012 Jöllenbeck GmbH.
All rights reserved. SPEEDLINK
®
, the SPEEDLINK
word mark and the SPEEDLINK swoosh are registered
trademarks of Jöllenbeck GmbH. Jöllenbeck GmbH
shall not be made liable for any errors that may appear
in this manual. Information contained herein is subject
to change without prior notice.
All trademarks are the property of their respective
owner. Please keep this information in a safe place for
later reference.
LLENBECK GmbH, Kreuzberg 2
27404 Weertzen, GERMANY
Entfernen Sie Abdeckung 2
nach dem Anbringen der Schutzfolie.
Peel off mask 2 after the application
is completed.
Schritt 4/4
Step 4/4
PROTECTION
FOILS
SL-3453
1
D
2
P
l
e
a
s
e
p
ee
l
o
ff
t
his
ma
s
k
b
efo
re ap
p
li
c
ati
o
n
D
1
2
2
D
Schritt 1/4
Step 1/4
Bitte beachten Sie, dass die Schutzfolie (D)
von zwei Abdeckungen umschlossen ist.
Please note that the protective lm (D)
is enclosed by two masks (1+2).
Schritt 2/4
Step 2/4 Schritt 3/4
Step 3/4
Entfernen Sie vorsichtig Abdeckung 1 und
berühren Sie hierbei nicht die Klebeseite.
Peel off mask 1 carefully and take care not
to touch the adhesive side.
Richten Sie die Schutzfolie (D) an die Ecken
des Displays aus und streichen Sie sie mit dem
Folienwerkzeug glatt.
Align the protective lm (D) with
the edges of the screen and plane it
with the applicator.
D = Schutzfolie / Protective lm, 1 + 2 = Abdeckungen / Protection masks
/