ZyXEL V-630 Owner's manual

V630

VoIP Wi-Fi Phone

Quick Start Guide

Version 3.60

6/2008

Edition 1

CONTENTS

ENGLISH 3

DEUTSCH 19

ESPAÑOL 39

FRANÇAIS 57

ITALIANO 75

РУССКИЙ 93

简体中文 113

繁體中文 129

Page is loading ...

ENGLISH

3

1 Overview

The V630 lets you use a wireless network connection to make

and receive phone calls through the Internet.

" You should have Internet access and a voice

account already set up.

This Quick Start Guide covers the following. See the User’s

Guide for more information on all features.

• Physical Features. See page 4.

• Installing and Charging the Battery. See page 5.

• The LCD Screen. See page 7.

• Initial Configuration. See page 9.

• Connect to a Wireless Network. See page 13.

• Basic Phone Operation. See page 15.

ENGLISH

4

2 Physical Features

NAME DESCRIPTION

LCD screen Use this screen to display information and

navigate the phone’s menus.

Left key Press this to open the on-screen menus and

select options.

Right key Press this to return to the previous menu. It is

also a shortcut to the phone book.

LCD screen

Alphanumeric

Left key

Right key

Power/End

Talk key

USB/recharge port

Headset jack

key

keypad

Up/Down key

ENGLISH

5

3 Installing and Charging the Battery

• WARNING: NEVER expose the battery to high temperatures

(such as fire or prolonged direct sunlight), short-circuit it or

open the battery’s casing. This could cause the battery to

ignite or explode.

• WARNING: DANGER OF ELECTRICAL SHOCK. Remove

the battery or battery cover only when the V630 is turned off

and the charger/USB cable is unplugged.

• Charge the battery for 10 hours before you first use the

V630.

Talk key Press this to make and receive calls.

Up/Down

keys

In the main screen, these are quick access

buttons. By default, Up opens the information

menu and Down opens the phone settings

profile setup. See the User’s Guide to change

their functions.

In the menus, these keys move the cursor.

Power/End

key

Press this to finish or reject calls. Hold it down

for a few seconds to turn the V630 on or off.

Alphanumeric

keypad

Use these keys to enter numbers, letters and

symbols.

Headset jack Connect a headset (not included) to this jack.

USB/

recharge port

Connect the phone’s power adaptor here to

charge the battery.

NAME DESCRIPTION

ENGLISH

6

1 Press the button on the V630’s battery cover and slide the

cover towards the V630’s base and lift it off.

2 Remove any packaging from the included battery. Hold the

battery with the plastic tab facing up. Insert the battery so

the end with the contacts (the metal areas) touches the

V630’s contacts located near the base. Press the battery

down.

3 Replace the battery cover.

ENGLISH

7

1 WARNING: Use only the included charger

or a USB cable (not included) with a

computer’s USB port. A different charger

might damage the V630 or its battery.

4 Connect the charger’s cable into the USB/Recharge port.

5 Connect the charger’s plug to a power socket. The

backlight turns on. If the V630 is turned on, the level

indicated in the battery icon’s meter cycles.

4 The LCD Screen

Press the red End/Power key for a few seconds to turn on the

V630. After the welcome display, the V630 prompts you to

enter the time and date.

V If the screen does not come on, ensure that the

battery is charged. See Section 3.

USB/recharge port

ENGLISH

8

The LCD main screen displays next.

The icons at the top of the LCD screen

display status information.

ICON DESCRIPTION

This shows the wireless LAN signal strength.

The keypad is locked. Press the Left key and * to

unlock it.

This shows whether the ring is turned on or not.

Vibrate is turned on.

This shows the remaining battery power. The

battery meter cycles during recharging.

No WLAN

Service

The status of the wireless LAN connection or SIP

server registration displays here.

Time/Date The time and date (in month/day/year format)

display in the middle of the screen.

Menu Use the Left key to perform the function shown

here. In the main screen, press the Left key to

enter the V630’s main menu.

Name Use the Right key to perform the function shown

here. In the main screen, press the Right key to

add or find a contact in the phonebook.

No WLAN Service

2:44

10/18/2007

Menu Name

ENGLISH

9

5 Initial Configuration

VoIP (Voice over IP) allows you to make phone calls over the

Internet. SIP is the protocol the V630 uses to make VoIP

calls. Before you configure the V630, you need:

• An active account with a VoIP service provider that uses SIP.

• A wireless LAN (IEEE 802.11b or IEEE 802.11g) connection.

See Section 6 for more information.

5.1 Entering Your VoIP Account

Do the following to set the V630 to use your VoIP account.

1 From the V630’s main screen, press the Left key (Menu)

to enter the menus.

2 Use the Down key to go to 4

Network and then the Left key to

select it.

3 Select 3 SIP Profiles.

--------Main Menu--------

1 Call log

2 Profiles

3 Setup

4 Network

Select Back

----------Network----------

1 Site Scan

2 WLAN Profiles

3 SIP Profiles

4 Ping Test

Select Back

ENGLISH

10

4 Select 2 Add to Profile.

5 Enter a name to identify the profile

and select Done.

• You may need to press a key

several times to input the desired

character.

• Press # to use lower-case let-

ters, upper-case letters, num-

bers, or symbols.

6 Select 2 Phone Number.

7 Enter your SIP account number. For

example, if you have a SIP account

like 1234567@voip-provider.com,

your SIP account number is 1234567.

-------SIP Profiles-------

1 Profiles List

2 Add to Profile

Select Back

---New Profile Name----

Done abc Clear

-------Add to Profile------

1 Display Name

2 Phone Number

3 SIP Server

4 SIP Proxy

Select Back

-----Phone Number------

1234567

Done Clear

ENGLISH

11

8 Select 3 SIP Server.

9 Select 1 SIP Address.

10 Enter the IP address of the SIP server

for this account and select Done. If

you have more than one server’s

address, enter the registrar server’s

address.

11 If the VoIP service provider gave you

a SIP port number other than 5060,

select 2 SIP Port and go to step 12.

Otherwise, skip to step 13.

-------Add to Profile------

1 Display Name

2 Phone Number

3 SIP Server

4 SIP Proxy

Select Back

----SIP Server Setup---

1 SIP Address

2 SIP Port

Select Back

------SIP Address------

111.222.333.444

Done Clear

----SIP Server Setup---

1 SIP Server Address

2 SIP Port

Select Back

ENGLISH

12

12 Enter the SIP port number from the

VoIP service provider and select

Done.

13 Select 4 SIP Proxy.

14 Configure your SIP account’s

username and password as the

proxy username and password. If

the VoIP service provider provided a

SIP proxy server address and/or a

port number other than 5060, enter

it.

15 Don’t modify the NAT traversal,

expire, or codec order settings

unless the VoIP service provider

provided settings for them or you

have a specific reason to do so.

Press the Power/End key to return

to the main screen.

Congratulations! You have configured the VoIP settings.

Continue with Section 6 to set up the wireless connection.

----------SIP Port---------

5060

Done Clear

-------Add to Profile------

1 Display Name

2 Phone Number

3 SIP Server

4 SIP Proxy

Select Back

-------Proxy Setup------

1 Proxy Address

2 Proxy Port

3 Proxy Username

4 Proxy Password

Select Back

-------Add to Profile------

4 SIP Proxy

5 NAT traversal

6 Expire

7 Codec Order

Select Back

ENGLISH

13

6 Connect to a Wireless Network

Do the following to configure the V630 to connect to the

wireless network.

1 From the V630’s main screen, press the Left key (Menu)

to enter the menus.

2 Use the Down key to go to 4

Network and then the Left key to

select it.

3 Select 1 Site Scan.

4 The V630 scans and then lists the

APs in the area. Select the AP to

which you want to connect.

--------Main Menu--------

1 Call log

2 Profiles

3 Setup

4 Network

Select Back

----------Network----------

1 Site Scan

2 WLAN Profiles

3 SIP Profiles

4 Ping Test

Select Back

------WLAN Scan-------

WLAN Example

RSSI: 64

Chan: 6

Select Back

ENGLISH

14

5 The AP in this example uses

(WPA-PSK) security, enter the

key (password) and select Done.

• You may need to press a key

several times to input the

desired character.

• Press # to use lower-case let-

ters, upper-case letters, num-

bers, or symbols.

6 To use a static IP address or PPPoE,

select IP Setting and select the

appropriate option.

Otherwise, press the Power/End key

to return to the main screen.

With a single SIP account, every WLAN

profile you create uses it. If you create

multiple SIP profiles, edit a WLAN profile SIP binding settings

to set which SIP profile the WLAN profile uses.

The signal strength icon displays after the V630 connects to

the AP. Next the V630 attempts to register with the SIP

server. “ZyXEL V630” displays in the main screen after

successful SIP registration (see the User’s Guide for how to

modify the SIP profile’s display name). You can now start

making calls. See Section 7 for details.

-------Enter Key--------

Done abc Clear

------Add to Profile:-----

1 SSID

2 Security set..

3. IP Setting

4. SIP Binding

Select Back

ENGLISH

15

7 Basic Phone Operation

V If you cannot call, make sure you have a

wireless LAN signal and check your VoIP

account settings. Try using a different VoIP

account, and/or try calling a different phone

number. If the problem persists, contact your

VoIP service provider.

MAKING A CALL

1 From the main screen, enter the number you want to call

or press the Right key to open the V630’s phone book.

See your User’s Guide for how to use the phone book.

2 Press the green Talk key to start the call.

USING THE SPEAKER PHONE

Press the Right key during a call to activate the speaker phone

feature.

RECEIVING A CALL

Press the green Talk key to answer an incoming call.

ENGLISH

16

ENDING A CALL

Press the red Power/End key to end a call.

CALL HOLD/UNHOLD

During a call, press the Left key (Call Option) to open the call

options. Select Hold/Unhold to put the call on or off hold.

MAKING A 3-WAY CONFERENCE CALL

1 During a call, press the Left key (Call Option) to open the

call options and then select New call.

2 Enter another phone number and press the green Talk key.

3 After the third party answers, press the Left key (Call

Option) to open the call options. Select conference.

TRANSFERRING A CALL

1 During the call, press the Left key (Call Option) to open

the call options. Select Blind Transfer.

2 Dial the number to which you want to transfer the call.

3 Wait until you hear it ring. Then press the Power/End key

to finish transferring the call.

ENGLISH

17

LOCKING AND UNLOCKING THE KEYPAD

Lock the keypad to prevent accidental calls. From the main

screen, press the Left key and * to lock or unlock the V630. You

can also have the keypad lock to turn on automatically if you do

not use the V630 for a specific length of time. See the User’s

Guide for how to do this.

PEER TO PEER CALLS (P2P)

Do the following to call directly to someone’s SIP phone

number and IP address without going through a SIP server.

1 Section 5 covered creating a SIP profile for using a SIP

server. Create a different SIP profile for P2P calls. The SIP

profile needs a phone number for the V630 (but no SIP

server settings). From the main screen, select Menu >

Network > SIP Profiles > Add to Profile.

2 You must use a static IP address. Create a WLAN profile

that uses a static IP address. From the main screen, select

Menu > Network > WLAN Profiles > Add to Profile.

Configure the IP address, subnet mask, gateway address,

and DNS server address. Use the SIP binding option to

select the SIP profile you created in the previous step. Your

phone number and (P2P) displays in the main screen.

ENGLISH

18

3 In the main screen, press the Right key to open the

phonebook. In the contact list, press Option > Add. Create

a phone book entry for the callee. Enter the callee’s name

and SIP phone number. Then select the P2P mode and

enter the callee’s IP address and SIP port number (5060 is

the default). Select what group the callee should belong to

(if any). Press the Left key to start the call.

PEER TO PEER CALLS (P2P)

Viewing a Product’s Certification(s)

1 Go to www.zyxel.com.

2 Select your product from the drop-down list box on

the ZyXEL home page to go to that product's page.

3 Select the certification you wish to view from this

page.

Page is loading ...

DEUTSCH

27

2 Gehen Sie mit der Down (Nach-

unten)-Taste zur Option 4 Network

(Netzwerk), und wählen Sie sie mit

der Left (Nach-links)-Taste aus.

3 Wählen Sie 3 SIP Profiles (SIP-

Profile).

4 Wählen Sie 2 Add to Profile (Zu

Profilen hinzufügen).

5 Geben Sie einen Namen für das

Profil ein, und wählen Sie Done

(Fertig).

• Um das gewünschte Zeichen

einzugeben, müssen Sie u. U.

mehrmals auf eine bestimmte

Taste drücken.

• Drücken Sie auf #, um Klein-

buchstaben, Großbuchstaben, Zahlen oder Symbole

zu verwenden.

--------Main Menu--------

1 Call log

2 Profiles

3 Setup

4 Network

Select Back

----------Network----------

1 Site Scan

2 WLAN Profiles

3 SIP Profiles

4 Ping Test

Select Back

-------SIP Profiles-------

1 Profiles List

2 Add to Profile

Select Back

---New Profile Name----

Done abc Clear

DEUTSCH

28

6 Wählen Sie 2 Phone Number

(Telefonnummer).

7 Geben Sie Ihre SIP-Kontonummer

ein. Wenn Ihr SIP-Konto z.B.

1234567@voip-provider.com heißt,

ist die Nummer Ihres SIP-Kontos

1234567.

8 Wählen Sie 3 SIP Server (SIP-

Server).

9 Wählen Sie 1 SIP Address (SIP-

Adresse).

-------Add to Profile------

1 Display Name

2 Phone Number

3 SIP Server

4 SIP Proxy

Select Back

-----Phone Number------

1234567

Done Clear

-------Add to Profile------

1 Display Name

2 Phone Number

3 SIP Server

4 SIP Proxy

Select Back

----SIP Server Setup---

1 SIP Address

2 SIP Port

Select Back

Page is loading ...

ESPAÑOL

46

1 En la pantalla principal del V630, presione la tecla Left

(Izquierda) (Menú) para entrar en los menús.

2 Utilice la tecla Down (Abajo) para ir a

4 Network (4 Red) y luego utilice la

tecla Left (Izquierda) para

seleccionar.

3 Seleccione 3 SIP Profiles (3 Perfiles

SIP).

4 Seleccione 2 Add to Profile (2

Añadir a perfil).

5 Escriba un nombre para identificar al

perfil y seleccione Done (Listo).

• Puede que necesite presionar

una tecla varias veces para

escribir el carácter deseado.

--------Main Menu--------

1 Call log

2 Profiles

3 Setup

4 Network

Select Back

----------Network----------

1 Site Scan

2 WLAN Profiles

3 SIP Profiles

4 Ping Test

Select Back

-------SIP Profiles-------

1 Profiles List

2 Add to Profile

Select Back

---New Profile Name----

Done abc Clear

Page is loading ...

ZyXEL V-630 Owner's manual

This manual is also suitable for

ZyXEL V-630 Owner's manual

in other languages

Related papers

Other documents