English
Read the manual carefully and ensure you have fully understood
its contents before operating this device for the first time.
A
Important Safety Instructions
Paragraphs beginning with the symbol indicate important instructions, tips or
conditions for the following settings.
For your own safety and the optimal performance of your TV, ensure to
read the safety instructions before performing any installation.
Hisense does not guarantee operation and performance of peripheral devices made by
other manufacturers. We disclaim any liability or damage that may arise from operation
and/or performance from usage of such other maker’s peripheral devices.
The recording and playback of content on this or any other device may require
permission from the owner of the copyright or other such rights in that content. It is
your responsibility to ensure that your use of this or any other device complies with
applicable copyright legislation in your country. Please refer to that legislation for more
information on the relevant laws and regulations involved or contact the owner of the
rights of the content you wish to record or playback.
The Index/Glossary explains certain terms used in this user manual and in the TV menu.
Read these instructions
Follow all instructions
Heed all warnings
Keep these instructions
All rights reserved.
▐ Important Notice
B
Important Safety Instructions
To ensure safe and correct use of this product, always comply with the following
precautions to avoid dangerous situations and damage to your unit:
The intended use and ambient conditions for this TV
This TV is intended for the rendering of video and audio signals, on a table-top or wall-
mounted, in a home or ofce environment. It must not be used in rooms with a high
level of humidity or dust concentration. The warranty is only valid if used as intended
by the manufacturer.
WARNING
High humidity and dust concentration may lead to current leaks in the device. To
reduce the risk of re or electrical shock:
- Do not expose this unit to rain, moisture, dripping or splashing water, and do
not place objects lled with liquids, such as vases, cups, etc. on or over the
unit.
- Do not touch the TV with wet hands.
- Do not expose to direct air-conditioning and keep candles or other naked
ames away from the TV at all times.
If the TV is moved from a cold environment to a hot environment, leave it switched off
▌Safety Instructions
The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Class II product : This symbol indicates
that it does not require a safety connection
of protective earthing (ground).
AC voltage : This symbol indicates that
the rated voltage marked with the symbol
is AC voltage.
C
Important Safety Instructions
WARNING
Never place a television set in an unstable location. A television set may fall,
causing serious personal injury or death. Many injuries, particularly to children, can
be avoided by taking simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the television
set.
- Only using furniture that can safely support the television set.
- Ensuring the television set is not overhanging the edge of the supporting
furniture.
- Not placing the television set on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and television set to a suitable
support.
- Not placing the television set on cloth or other materials that may be located
between the television set and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the
television set or its controls.
If your existing television set is being retained and relocated, the same
considerations as above should be applied.
for at least an hour to avoid condensation. If used outside, make sure it is protected
from moisture.
If you notice anything unusual, immediately remove the power plug.
In case of re, use preferably a CO
2
gas or powder re extinguisher. If such
extinguishers are not accessible, try to isolate the electrical supply before using a
water re extinguisher.
D
Important Safety Instructions
Moving/Transportation
Before moving this TV, disconnect all
cables and move in the vertical position
only. Grasp the device on the upper and
lower edges of the frame.
- Do not press or put stress on the front
panel of the TV. It may take two or
more people to carry larger TVs.
If you have to briey lay down the TV,
place the unit with its entire front surface
lying at on soft material.
The LED screen is made of glass and can
break if is not handled properly. Always
wear rubber gloves to carry the unit. If
the LED screen is damaged, liquid crystal
might leak out. In case of skin contact,
immediately rinse thoroughly with water.
Power Supply
Incorrect voltages can damage the TV.
Only connect this unit to a power supply
with the correct voltage and frequency
noted on the type plate, using the
supplied power cable.
The power plug must be easily accessible
so that the device can be disconnected at
all time. The unit is live, even if in standby
mode, as long as the unit is connected to
a power outlet.
It is recommended that this unit is placed
on a dedicated circuit.
- Do not overload the power outlets by
connect too many appliances to the
same outlet. Overloaded wall outlets,
extension cords, etc. are dangerous
and can result in electric shock and
re.
After power off, don't turn it on again in
5 seconds. Frequent switching power
supply in a short period of time can cause
abnormal TV.
Power plug and power cable
- Do not touch the power plug with wet
hands.
- Do not place heavy objects on the
power cable. Route the cable so that it
is not kinked or laid over sharp edges,
walked on or exposed to chemicals. A
power cable with damaged insulation
can cause electric shock and re.
- Pull the power plug, NOT on the cable
when disconnecting. The cable can
become damaged and cause a short
circuit if pulled on.
- Do not place the power cable near a
high temperature object.
- Do not move the TV with the power
cable plugged into a socket.
- Do not use a damaged or loose power
cable, or a damaged socket outlet.
- Do not use any power cords other
then the one supplied with this unit.
Set-up
Check that the location is suitable to bear
the load of the TV. Place on a level, sturdy
and horizontal base. Ensure that the unit
does not hang over the edge of the base
when placed in or on furniture. If placed
on a cart, use caution when moving to
avoid the unit from tipping over.
- Place the unit in a normal upright
horizontal position. It must never
be operated vertically, lying at or
hanging overhead from the ceiling.
- Place the unit where it is not exposed to
direct sunlight or other sources of heat.
When mounting the TV on a wall, follow
the instructions supplied with the wall-
mount, make sure not to install the TV by
hanging the power and signal cables on
the back of the TV.
E
Important Safety Instructions
Air ventilation and high
temperatures
Install your TV only where there is proper
ventilation, and ensure that there is at least
10 cm free space on the sides and 20 cm
above the unit for air circulation. Excessive
heat and obstruction of ventilation could
lead to re or early failure of some electric
components.
- Do not block any ventilation openings
with newspapers, tablecloths, curtains,
etc.
- Do not dry clothing etc. on top of the unit.
- Take care not to touch the ventilation
openings since they may become hot.
- Do not insert foreign objects into the TV
through the vents.
The Stand
- Do not use any stand other than the one
supplied with this unit.
- Do not modify or use the stand if it
becomes warped of physically damaged.
- During setup, make sure that all the
screws are securely tightened.
- Ensure that the TV does not suffer any
impact during the attachment of the
stand.
- Ensure that children do not climb onto
the stand.
- Attach or remove the stand with at least
two people.
20cm
10cm
10cm
10cm
Prevent small items from getting into the
interior of the device through the ventilation
slots. Such objects may cause short circuits,
which may cause re.
If something should get inside the unit,
immediately unplug the power plug of the
device and contact service support.
The LED screen
Despite thorough care when manufacturing
this display, it cannot be 100% guaranteed
that no sub-pixel defects will occur due
to technical reasons. These cannot be
considered as a device defect in terms
of the guarantee. They will not affect the
performance and reliability of the TV.
To prevent “image burn”, avoid displaying
still images for long periods of time, there
is a possibility that a copy of the image
may remain. If the aspect ratio is set to 4:3
for a long period of time, image burn may
occur on the black areas. Image burn is not
covered by the warranty.
- Do not apply strong force or impact on
the display panel.
Avoid touching the LED screen or touching
it for long periods of time. Doing so may
produce some temporary distortion effects
on the screen.
F
Important Safety Instructions
Supervision
- Do not let children play unsupervised
close to the TV. It could tip over, be
pushed off or pulled down from the
stand surface and injure someone.
- Do not allow a switched-on TV to run
unattended.
Volume
Loud music and noises can lead to
irreversible damage to your ears. Avoid
extreme volume, especially over long
periods and when using headphones.
If you hear a drumming noise in your ears,
turn down the volume or temporarily stop
using headphones.
Thunder Storms
Pull out the power plug and all connected
antenna cables from the TV during a
thunderstorm. Overvoltage caused by
lightning strikes can damage the TV via
the antenna system, as well as the wall
socket.
Long periods of absence
As long as the power plug is connected to
a live socket outlet, the TV will consume
power even in standby mode. The power
plug and all connected antenna cables
should be disconnected out during long
periods of absence.
Radio waves
- Do not use the TV in any medical
institutions or locations with medical
equipment. Radio waves may interfere
with medical equipment and cause
malfunction.
- Do not use the TV near any automatic
control equipment such as automatic
doors or re alarms. Radio waves
may interfere with automatic control
equipment and cause malfunction.
If you have a cardiac pacemaker, keep a
distance of at least 22 cm from the TV. Radio
waves may interfere with the operation of a
pacemaker.
Built-in wireless LAN
- Do not connect to wireless networks
that you do not have the usage rights
for. Data transmitted and received over
radio waves may be intercepted and
monitored.
The built-in wireless LAN uses 2.4 GHz
frequency bands. To avoid malfunctions
or slow response caused by radio wave
interference, keep the TV away from
devices such as other wireless LAN devices,
microwaves, mobile phones, and other
devices that use 2.4 signals.
G
Cleaning and care
CAUTION:
Unplug the power cord prior to cleaning
the TV.
Clean the TV, the screen, and the remote
control with a soft, moist, clean and
color-natural cloth only. Do not use any
chemicals.
- Do not subject the surfaces to insect
repellent, solvent, thinner or other
volatile substances. This may degrade
the surface quality.
- Do not spray water or other liquids
directly on the TV. Liquid inside the TV
could lead to product failure.
- The surface of the display panel is
treated and may be easily damaged.
Take care not to scratch it with
ngernails or other hard objects.
- Also wipe the power plug with a dry
cloth at regular intervals.
Service/Repair
Never remove the cover/back of the TV;
there are no user serviceable parts inside.
Refer all service to qualied service
personnel.
Packaging
Keep the anti-moisture materials and
plastic bags out of reach of children.
Plastic bags can cause suffocation and
the anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital.
Modication
Do not attempt to modify this product
in any way. Unauthorized modication
could void the warranty of this unit, cause
electric shock and res.
Remote Control batteries
- Incorrect installation may cause battery
leakage, corrosion and explosion.
- Replace only with the same or
equivalent type.
- Do not mix old and new batteries.
- Do not mix different battery types
- Do no use rechargeable batteries
- Do not burn or break up batteries.
- Be sure to dispose of batteries
correctly.
- Do not expose batteries to excessive
heat such as sunshine, re or the like.
Outdoor Antenna Grounding
If an outdoor antenna used, be sure the
antenna system is protected against
voltage surges and built-up static charges.
Disposal
Refer to the recycling section of this manual.
Important Safety Instructions
1
Contents
Contents
Accessories List..............................................................................................................1
Installing the Stand .........................................................................................................2
Installing the wall mount bracket (not included)..............................................................3
TV Front..........................................................................................................................5
TV Rear ..........................................................................................................................6
Making Connections .......................................................................................................7
Remote Control ............................................................................................................12
Turning the TV on for the First Time .............................................................................14
Specifications ...............................................................................................................15
Other Information..........................................................................................................16
TV User Manual European Guarantee
Base Stand Remote Control AAA Batteries × 2
screw × 4 Earphone to YP
B
P
R
Cable Earphone to Audio Cable
Accessories List
The following accessories are included with TV:
Please visit Hisense ofcial website for more details.
Product image is only for reference, actual product may vary in appearance.
Parts of the software function changes with the system upgrade.
2
Installing the Stand
Installing the Stand
CAUTION
Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount
brackets.
The LED display is very fragile, and must be protected at all times when installing
the base stand. Be sure that no hard or sharp object, or anything that could scratch
or damage the LED display, comes into contact with it. DO NOT exert pressure on
the front of the TV at any time because the screen could crack.
Follow the illustrations and textual instructions below to complete the installa-
tion steps:
Product images are only for reference, actual product may vary in appearance.
NOTE
1. Carefully place your TV facedown on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Remove the 2 stands from the accessory bag and then insert the stands into the
bottom slots of the TV.
3. Secure the base stand to the TV with the 4 screws in accessary tightly.
BASE STAND
Screws: ST4×14F
(
39"
)
3
Installing the wall mount bracket (not included)
Installing the wall mount bracket (not included)
Before you begin the third-party manufacturer instructions, be sure to do the following
things:
1.Place the TV face down on a clean, safe and cushioned surface.
2.Remove the TV stand if you already attached it.
3.Place the spacers (not included) in the corresponding bracket holes.
CAUTION
When you attach the mount, be sure to use the spacers (provided by the third-party
manufacturer) between the TV and the bracket.
To prevent internal damage to the TV and ensure it is mounted securely, be sure
to use fixing screws (not provided) that are 8.0 -10.0 mm
(39") in length when
measured from the attaching surface of the mounting hook.
8.0 -10.0 mm (39")
Wall mount bracket
Screw
Spacer
Rear cover of the TVRear cover of the TV
Screw
(not provided)
Bracket
(not provided)
Spacer
(not provided)
Wall mount hole pattern VESA (mm) 200 × 200
Wall mount screw size (mm) M6
4
Installing the wall mount bracket (not included)
Follow instructions provided with the Wall mount bracket.
To complete the installation, please contact the wall-mount manufacturer or the
retailer from which you purchased the TV.
The selected screws are 8.0 -10.0 mm
(39") in length when measured from the
attaching surface of the rear cover. The diameter and length of the screws differ
depending on the Wall mount bracket model.
The diameter and length of the screws differ depending on the wall mount bracket model.
NOTE
5
TV Front
TV Front
Remote sensor /
Power indicator
STANDBY / SOURCE
NOTES
The Picture is Only for Reference.
Powering on the TV requires several seconds to load program. Do not rapidly turn
the TV off as it may cause the TV to work abnormally.
Item Description
Remote sensor
Receive remote signals from the remote control.
Do not put anything near the sensor, as its function may be
affected.
Power indicator Red light up in standby mode. Blue light up in power on mode.
STANDBY/
SOURCE
Press the button to turn on the TV. Press the button for a few
seconds to put the TV in standby mode.
Touch to select among the different signal sources.
6
TV Rear
TV Rear
NOTES
Product images are only for reference, actual product may vary in appearance.
ANT2 Jack supports power supply for satellite antenna (13/18V, 0.5A max.)
Check the jacks for position and type before making any connections. Loose
connections can result in image or color problems. Make sure that all connections
are tight and secure.
Not all A/V devices have the ability to connect to a TV, please refer to the user’s
manual of your A/V device for compatibility and connections procedure.
Before connecting external equipment, remove the mains plug
from the wall socket. This may cause electric shock.
ANT 1
DVB-T/T2/C
ANT 2
DVB-S/S2
HEADPHONE
COMMON INTERFACE
ARC MHL
HDMI 2 HDMI 1
SERVICE
USB
DC 5V 0.5A(MAX)
LAN
DIGITAL
AUDIO OUT
VIDEO
L/R
L/R
AV IN
COMP IN
7
Making Connections
LAN (
Wired setup
)
Connect your TV to your network by connecting the LAN port on the back of your
TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the
illustration below.
·
We recommend to use a modem or router that supports Dynamic Host
Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS, so you
don’t have to enter them manually. Most home networks already have DHCP.
Wireless setup
Connect your TV to your network wirelessly, you need a wireless router or modem.
See the illustration below.
·
The built-in Wireless LAN Adapter supports the IEEE 802.11 b/g/n
communication protocols. We recommend using IEEE 802.11n router. Low
transfer rates for b/g may have the influence on the quality of streamed videos
and other media.
Wireless router with DHCP
LAN Cable
Wireless LAN Adapter
built-in TV set
NOTES
You must use the built-in Wireless LAN Adapter to use a wireless network because
the set doesn’t support external USB network adapter.
If the wireless router supports DHCP, your TV can connect more easily to the wireless
network.
If you apply a security system other than the systems listed below, it will not work with
the TV.
security system:WPA,WEP,WPA2.
In order to guarantee smooth network, the distance between router and TV is less
than 10 meters.
TV JACK
Modem CableLAN CableLAN Cable
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
LAN
8
HDMI 1(MHL)
Connect an MHL cable (not provided) from your MHL-enabled device,
such as a cell phone.
Making Connections
HDMI 2(ARC)
Connect an HDMI cable from an external digital audio system.
ARC enables the TV to directly output the digital sound through an HDMI cable.
Please note that it works only when the TV is connected to the audio receiver that
supports the ARC (Audio Return Channel) function.
When this port is used as the ARC function, it can't be used as signal input at the
same time.
TV JACK
TV JACK
HDMI cable (not included)
MHL cable (not included)
HDMI
Audio Amplier/Speaker
Phone
HDMI
Connect an HDMI cable from an external A/V equipment.
Some devices such as PVR or DVD player require HDMI signal to be set to output
in the device's settings. Please consult your device user manual for instructions.
Please note that the HDMI connector provides both video and audio signals, it’s
not necessary to connect an audio cable.
TV JACK
(not included)
HDMI
DVD/Blu-Ray/AV receiver/
Set-top Box
HDMI
NOTES
The repetition rate is fixed at 100%, and it can not be adjusted.
ARC
HDMI 2
MHL
HDMI 1
9
Making Connections
ANT Connect an outdoor VHF/UHF antenna or cable.
ANT Connecting a satellite antenna.
TV JACK
Outdoor
Antenna
Antenna Cable (75Ω)
or
ANT OUT
Cable
VHF/UHF Antenna
ANT 1
DVB-T/T2/C
(not included)
(not included)
TV JACK
ANT 2
DVB-S/S2
USB
Connect the USB devices such as hard drives, USB sticks and digital cameras
for browsing photos, listening music and watching recorded movies. You can use
Timeshift and record (refer to “PVR/Timeshift”). At the same time update is also an
easy thing and will be done just by plugging the USB with the updating files into
the same interface.
NOTES
When connecting a hard disk or a USB hub, always connect the mains adapter of
the connected device to the power supply. Exceeding a total current consumption
may result in damage. The USB devices maximum current consumption are
500mA.
For individual non-standard high-capacity mobile hard disk, if it's impulse current is
greater than or equal 1A, it may cause TV-rebooting or self-locking. So the TV does
not support it.
The USB port supports a voltage of 5V.
The maximum supported storage space of the hard disk is 1T.
If you want to store the video streaming of a DTV program, the transfer rate of the
USB storage device must not be less than 5MB/s.
Since the function record temporary the program onto a hard disk only. Please
connect a hard disk which its storage capacity is no less than 8G.
TV JACK
USB
DC 5V 0.5A(MAX)
10
Making Connections
COMMON INTERFACE
Insert the CI+ module for watching scrambled services like pay-tv channels or
some HD channels.
SMART CARD
CAM CARD
TV JACK
1 2
NOTES
Before you insert/remove the CI+ module, ensure that the TV is switched off.
Then insert the CI card into the CI+ module in accordance with the Service
Provider’s instructions.
Do not repeatedly insert or remove the Common Access Module as this may
damage the interface and cause a malfunction.
You must obtain a CI+ module and card from the service provider of the
channels you want to watch.
Insert the CI+ module with the SmartCard in the direction marked on the module
and SmartCard.
CI+ is not supported in some countries and regions; check with your authorized
dealer.
HEADPHONE Connect Headphone for audio out of the TV.
TV JACK
Headphone (not included)
HEADPHONE
DIGITAL AUDIO OUT Connect to an external digital audio device.
Before connecting a digital audio system to the DIGITAL AUDIO OUT jack, you
should decrease the volume of both the TV and the system to avoid that the
volume suddenly become bigger.
TV JACK
DIGITAL AUDIO cable (not included)
Audio Amplier/Speaker
DIGITAL
AUDIO OUT
11
Making Connections
AV IN
Connect the Composite cable from an external A/V Device.
Use the audio and video cables to connect the external A/V device’s composite
video/audio jacks to the TV’s jacks. (Video = yellow, Audio Left = white, and Audio
Right = red)
COMPONENT IN
Connect a component cable and an audio cable from an external
A/V Device.
The component output ports Y, P
B
and P
R
on the VCD or DVD can sometimes be
identified as Y, C
B
and C
R
.
TV JACK
VCR/DVD Player/
Recorder/Set-top box/
Satellite Receiver/Video Camera
Video
L
A/V OUT
R
R LP
R
P
B
Y
Component
TV JACK
VCR/DVD Player/Recorder/
Set-top box/Satellite Receiver/
Video Camera
P
B
P
B
Y
Y
White(L)
White(L)
White(L)
White(L)
Red(R)
Red(R)
P
R
P
B
/C
B
Y
Red(R)
Red(R)
P
R
/C
R
Yellow(Video)
VIDEO
L/R
L/R
AV IN
COMP IN
VIDEO
L/R
L/R
AV IN
COMP IN
VIDEO
L/R
L/R
AV IN
COMP IN
VIDEO
L/R
L/R
AV IN
COMP IN
（
49
"
）
（
49
"
）
（
32
"/
40
"
）
（
32
"/
40
"
）
12
Remote Control
1
POWER: Switch the TV on or into
standby mode
2
INPUT: Select input sources
3
Channel Number: Direct channel
selection or numbers input
4
EPG: Display the Electronic Program
Guide (DTV mode)
5
Subtitle:Activate or deactivate the subtitle
mode
6
Color keys for direct selection of options
7
SETTING: Display the Settings menu
8
Info: Display the present program
information such as the current channel
and the input source
9
/ / < / >: Allows you to navigate the
OSD menus and adjust the system
settings to your preference
10
OK: Confirm the selection in the OSD
menus
11
BACK: Return to previous menu
12
EXIT: Exit the menu
13
HOME: Enter the Smart
14
CH.List: Display the Channel List on the
screen
15
VOL
+
/
-
: Adjust the volume
16
CH
+
/
-
: Switch channel
17
MUTE:Mute or restore the TV sound
18
Playback and record keys
19
PVR: Record the current program (DTV
mode)
20
NETFLIX:Press to launch NETFLIX
instant video streaming
21
YouTube:Enter the YouTube app
22
Wuaki.tv:Enter the Wuaki.tv
23
TXT: Turn on/off the teletext function
1
4
5
7
9
11
16
13
15
18
20
22
2
3
6
8
10
12
14
17
19
23
21
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
Hisense 8043801 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Hisense 40 Inch 40A5600FTUK Smart Full HD LED Freeview TV User manual
-
Hisense ES-A22521A-1 B User manual
-
-
-
-
-
-
-
-
Other documents
-
Genius DPF-700 Owner's manual
-
Sitecom CN-886 Datasheet
-
Sony XBR-55X900A Owner's manual
-
Sony KDL-70R550A User manual
-
Sony XBR-55X850A Owner's manual
-
-
Sony Bravia XBR-65X890C Reference guide
-
-
Sony XBR-65X900A Operating instructions
-