Currys Essentials C15DVDB10 Quick start guide

Type
Quick start guide

Currys Essentials C15DVDB10 is a 15.6” LCD TV with a built-in DVD player. It comes with a remote control and two AAA batteries.

To set up the TV, you will need to connect it to the mains socket and an aerial. You can use the RF coaxial cable provided to connect the TV to the aerial socket on the wall, or you can use a different type of cable if you have one. Once the TV is connected, you can turn it on by pressing the power button on the remote control or on the top panel of the TV.

The TV has a number of features that you can use to improve your viewing experience. For example, you can adjust the picture settings, sound settings, and language settings. You can also use the TV to play DVDs or to connect to other devices, such as a games console or a Blu-ray player.

Currys Essentials C15DVDB10 is a 15.6” LCD TV with a built-in DVD player. It comes with a remote control and two AAA batteries.

To set up the TV, you will need to connect it to the mains socket and an aerial. You can use the RF coaxial cable provided to connect the TV to the aerial socket on the wall, or you can use a different type of cable if you have one. Once the TV is connected, you can turn it on by pressing the power button on the remote control or on the top panel of the TV.

The TV has a number of features that you can use to improve your viewing experience. For example, you can adjust the picture settings, sound settings, and language settings. You can also use the TV to play DVDs or to connect to other devices, such as a games console or a Blu-ray player.

15.6 LCD TV
WITH DVD PLAYER
QUICK START GUIDE
C15DVDB10
Unpacking
11
Connecting the Aerial
44
Installing the Base Stand
22
Operating Your Remote Control
33
66
Connecting to the Mains Socket
55
Turning the TV on for therst time
Remove all packaging from the TV. Retain the packaging. If you dispose of it please
do so according to any local regulations.
1. Plug in the mains plug into the mains socket after you have completed all the
connections.
2. Switch on the POWER ON/OFF switch at the bottom of the TV. At this stage, the
TV switches to standby mode. The red LED indicator will illuminate on the front
panel of the TV.
3. Press the button on the top panel of the TV or the button on the remote
control to turn the TV on. The red LED indicator will turn blue.
The first time you turn the TV on, it will go straight into First Time Installation.
Connect one end of the RF coaxial cable to the aerial socket on the wall and the
other end of the cable to the RF (75Ω) socket on the right rear side of your TV.
Install the batteries correctly by following the polarity (+ and -) indications
in the battery compartment.
Do not connect the TV to the mains supply until you have completed all
the connections.
1. Press and lift the back cover
up to open the battery
compartment of the remote
control.
2. Insert two AAA size batteries.
Close the battery
compartment cover.
Press the OK button on the remote control to start the First Time Installation.
Congratulations on the purchase of your new Currys Essentials TV.
Your new TV incorporates the latest technology to enhance your viewing experience.
We would suggest that you allow about 20 mins for initial setup.
Please follow this guide for a successful rst time installation.
To mains socket
OR
RF coaxial cable
(not included)
1
2
1. Lay the TV down on a at surface with the back side facing up. Please make sure to
place a soft cushioned material (such as a pillow or thick piece of foam) beneath the
screen.
2. Slide in the base stand until the screw holes are aligned. Secure the base stand with
the 2 screws.
Screws x 2
(P.N. I.03.MP4010001)
Screw
Well done, your new TV is now ready to use.
You will nd that there are many exciting features available. To get to know all these
features, please take some time to read the instruction manual provided with your TV.
(P.N.: I.08.015167814)
LCD TV
Base Stand Screws x 2
Remote Control /
AAA Batteries x 2
AV Cable
Instruction Manual Quick Start Guide Digital Switchover
Addendum
Video
Video
R
R
L
L
ON/OFF
  • Page 1 1

Currys Essentials C15DVDB10 Quick start guide

Type
Quick start guide

Currys Essentials C15DVDB10 is a 15.6” LCD TV with a built-in DVD player. It comes with a remote control and two AAA batteries.

To set up the TV, you will need to connect it to the mains socket and an aerial. You can use the RF coaxial cable provided to connect the TV to the aerial socket on the wall, or you can use a different type of cable if you have one. Once the TV is connected, you can turn it on by pressing the power button on the remote control or on the top panel of the TV.

The TV has a number of features that you can use to improve your viewing experience. For example, you can adjust the picture settings, sound settings, and language settings. You can also use the TV to play DVDs or to connect to other devices, such as a games console or a Blu-ray player.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages