2. Delfield
  3. SALD-1

Delfield SALD-1, SALD-2 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Delfield SALD-1 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Shelleymatic
®
by Deleld
Outer body is constructed of 18-gauge stainless steel. Legs
are 1.00” (25mm) outside diameter, 16-gauge stainless steel
tubing with 4.00” (10cm) diameter locking stem casters for
mobility.
Outer lid is constructed of 18-gauge stainless steel.
Inner liner is a one-piece durable polyethylene plastic with
0.38” (1cm) diameter holes for proper water disbursement.
Unit has a completely enclosed, water-tight motor mounted
underneath the unit.
Unit has a 1.50” (4cm) outside diameter drain, and an
adjustable on/off timer for selection of drying cycles of up
to five minutes.
Stainless steel hooks are mounted on the lid and sides of the
unit for storage of the lid and cord when unit is not in use.
Electrical box for capacitor and timer control is mounted on
the bottom of the unit. Six foot cord and 5-15 NEMA plug are
supplied. SALD-1 is 115 Volt, 60 Hertz single phase. SALD-2 is
230 Volt, 50 Hertz single phase.
Specifications
Standard Features
Options &
Accessories
• Body is 18-gauge stainless steel
• Legs are 1” diameter 16-gauge
stainless steel tubing
• (3) 4.00” diameter polyolefin
locking stem casters
• Outer lid is 18-gauge stainless
steel
• Inner liner is perforated durable
polyethylene plastic
• Water-tight motor and controls are
mounted on the bottom of the
unit
• 6’ cord and plug supplied
• Unit has 1.50” drain
• Adjustable ON/OFF timer for drying
times up to 5 minutes
• Lid and cover storing hooks come
standard
• SALD-1 115V salad and vegetable drier
• SALD-2 230V salad and vegetable drier
Models
SALD-1/SALD-2
Salad and Vegetable Drier
SALD-1/SALD-2: Salad and Vegetable Drier
• Additional polyethylene liner
SALD-1
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Specifications
Model Height Width Depth Inner Liner
Capacity
Inner Liner
Diameter
Inner Liner
Depth
V/Hz/Ph Amps Ship Weight
SALD-1
32.50”
(83cm)
27.00”
(69cm)
27.00”
(69cm)
20 Gal
(77L)*
15.62”
(40cm)
16.87”
(43cm)
115/60/1 2.7 85lbs/ 38kg
SALD-2
32.50”
(83cm)
27.00”
(69cm)
27.00”
(69cm)
20 Gal
(77L)*
15.62”
(40cm)
16.87”
(43cm)
230/50/1 1.35 85lbs/ 38kg
*Inner liner can hold up to 18 heads of chopped lettuce.
Shelleymatic
®
by Deleld
ø21.87”
56cm
21.87”
56cm
19.93”
51cm
32.22”
82cm
12.29”
31cm
22.92”
58cm
5.09”
13cm
3.50”
9cm
Plan View
SALD-1, SALD-2
Elevation View
SALD-1, SALD-2
Side View
SALD-1, SALD-2
SALD-1/SALD-2
Salad and Vegetable Drier
Printed in the U.S.A.
DSSALD
04/11
Deleld reserves the right to make changes to the design or specications without prior notice.
/