!
!
Steam Oven Owner's Manual
!
!
! !
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!DIRECTORY)
!
1、TECHNICAL
SPECIFICATION…………………………………………………………………… 1
2、INSTALLATION…………………………………………………………………………………
1
2.1 BFFORE THE INSTALLATION ………………………………………………………… 1
2.2 INSTALLATION…………………………………………………………………………1 !
3、SAFETY PRECAUTIONS…………………………………………………………………………
4
4、DISPOSE OF REJECTED PRODCUTS……………………………………………………………
4
5、STRUCTURE
DIAGRAM……………………………………………………………………………5
6、DISCRIPTION OF FRONT PANEL
CONTROLS……………………………………………………6!
7、HOW TO USE YOUR STAEM
OVEN…………………………………………………
………………6
7.1 CLOCK SETTING……………………………………………………………………… 6
7.2 INSTRUCTIONS OF WATER LEVEL………………………………………………………6
8、
FUNCTIONS…………………………………………………………………………………
……7
8.1 CHOOSE FUNCTION……………………………………………………………………7
8.2 STEAM FUNCTIONS……………………………………………………………………7
8.3 COOKING MEAT（AUTOMATIC COOKING）……………………………………………7
8.4 COOKING FISH（AUTOMATIC COOKING）……………………………………………8
8.5 COOKING VEGETABLE（AUTOMATIC COOKING）…………………………………… 8!
8.6 GRILL FUNCTION…………………………………………………………………… 9
8.7 PIZZA FUNCTION……………………………………………………………………… 9
8.8 DEFROST FUNCTION （EDITMENU）………………………………………………… 10!
8.9 REHEATING AND DISINFECTING FUNCTIONS（AUTOMATIC COOKING）…………… 10!
9、 STATR DELAY
TIME ………………………………………………………………………10!
10、 PAUSE IN THE PROCESS OF
COOKING…………………………………………………………10!
10.1 PAUSE OR CANCEL COOKING ………………………………………………………… 10
10.2 MODIFYING PARAMETERS …………………………………………………………… 11
10.3 STANDBY MODE……………………………………………………………………… 11
11、 END STEAM
COOKING…………………………………………………………………………11
11.1 WITH STEAM FUNCTION OF THE END OF PROGIAM…………………………………11
11.2 WITH NO STEAM FUNCTION OF THE END OF PROGIAM……………………………11!
!
!
12、 DEMONSTRATION AND CHILD LOCK…………………………………………………………
11!
12.1 DEMONSTRATION…………………………………………………………………… 11
12.2 CHILD L O C K ………………………………………………………………………… 12
12.3 UNLOCK……………………………………………………………………………… 12
13、 DESCALING FUNCTION ……………………………………………………………………
12
14、 CLEANING AND MAINTENANCE ……………………………………………………………
13!
15 、 DISPLAYS……………………………………………………………………………………
13!
16、 TROUBLE S H O O T I N G …………………………………………………………………………
14!
!
!
!
!
!
1、 Technical specification
2、Unpacking and installation
2.1!Before)the)installation)
1、Machine!shell!to!have!because!impact!or!pressure!caused!by!deformation!traces.)
2、Check that the oven door closes correctly and the inside of the door and front
oven panel are not damaged.
3、 Metal net of the oven door is not bend or out of shape.
4、 The power cord is not break loose.
5、 The data on the oven nameplate is compliance with the relevant regulations.
6、 When unpacking the case packing don't lost at home, Separate the various
packaging materials on type and consign them to the nearest separate disposal
centre.
When steam oven have damaged or operation is not normal, please stop
immediately use, unplug the power supply plug.
Only call local dealer or service department authorized by our
MODEL
SG1035ES
SS1035ES
CAPACITY （L）
35L
VOLTAGE(V)/FREQUENCE（Hz）
220-240/50
POWER(STEAM)（W）
1250-1500
POWER(STEAM OVEN)（W）
1400-1700
PRODUCT DIMENSION（mm）
594×530×455
PACKAGE SIZE（mm）
675×611×525
GROSS/NET WEIGHT（Kg）
33.0/29.0
!
!
company to repair
your steam oven.
Steam oven by manufacturers training qualified professionals for
repair, please don't disassemble and repair.
2.2)Installation)
Only a qualified person in compliance with the instructions provided must
install the appliance .the manufacturer declines all responsibility for improper
installation, which may harm persons and animals and damage property.
Important: - T h e p o w e r s u p p l y t o t h e a p p l i a n c e m u s t b e c u t o f f b e f o r e a n y a d j u s t m e n t s
or maintenance work is done on it;
- Air duct is supposed to use in Ventilation.
If we put the oven into cabinet, the material cabinet should be insulated,
and the clearance between the edge of the cabinet and the oven should be over 100mm
for ventilation.
!
!
In order to fix the oven with cabinet， please open the steam oven door and
insert four wood screws into the four hole around frame and fix them.
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
Note: the installation and handling, please do not use the handle for
stress point
!
!
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
3、Safety precaution)
Warning：Only a qualified person can install ,repair and remove the oven，
Please keep child away.
In the first steam oven heating pipe, needs to be heated to high temperature
air heat 1 time, heating time to ensure the enough to remove the production
process of oil residue.
In order to prevent steam oven glass generate too much condensed, roasted good
food don't long time in the steam oven
Do not unplug the socket with wet hands.
Never obstruct vents provided for ventilation and heat dispersal.
In order to your safety, please unplug the socket and waiting the steam oven
is cool before cleaning.
When the cooking is end，please open the oven door and keep distance due to there
is a large of water vapor.
After cooking we recommend that you should clean food left in the steam oven
and condensation produced on the inner glass of the steam oven immediately.
Cooking after procedures will be will steam generator of excess water to give
back to draw out, please note that the tank empty
Never use the steam oven for heating installation.
Calling the qualified staff to repair if the appliance does not work normally.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven
door glass since they can scratch the surface, which may result in shattering
of the glass.
In order to ensure the food is delicious, we r e c o m m e n d t h a t p o u r i n t o f r e s h w a t e r
!
!
before cooking.
This appliance is not intended for use by persons (including children) with
reduced physical sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
This appliance is for household use and complies with the EEC directives
currently in force. The appliance is for cooking and heating food.
Dealers and users for failure to comply with the above instructions
replace steam oven parts and not use original accessories caused personal
injury and property damage, the company will not be responsible for any
legal liability.
! !
4、Dispose)of)rejected)product)
Our products are produced by using environmental protection packaging
materials, so you in dealing with these packing materials should pay attention
to packaging material recycle utilization, protection and preservation of our
environment. Don't discarded plastic packaging to prevent children playing in
the danger caused by asphyxia.
Please send your rejected productions to Environmental Conservation Organ
ization or authorized Electrical recycle bin, this will recycle useful mater
ials and reduce the hazards of environment.
5Structure(of(diagram(
!
)
)
))))))))))))))))))))))))))
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!
!
!
!
!
Available)Accessories)
1、 控制面板
2、 水箱组件!
3、 密封圈!
4、 烤架!
5、 烤盘!
6、 带孔烤盘!
7、 炉门组件!
!
!
Perforated container：Cooking for fresh or refrigerant vegetables, meat a n d p o u l t r y .
Non-perforated container：Cooking for preserved fruit、dumplings.
Rack：Cooking for foods with small utensils ,Like: steam bun, sweetmeats。
6Description(of(front(panel(controls(
)
PT1. This button is used to setup time, choose cooking time length, high and low
temperature.
PT2. This knob is for setting operation and the start and end of programmer.
DSP1. This displays the time of programmer executing and clock
DSP2. This displays temperature and types of foods.
DSP3. Functions indication, which displays all the optional functions.
DSP4. Symbol indication, which displays all the optional symbols.
Functions Description
Steam Meat
Fish Vegetable
Rroast Pizza
!
!
Defrost Disinfecting
Clock Child lock
Cooking duration Delay time
Descaling Water level (not lack of water)
Water level (lack of water) Temperature
7、How to use your oven
7.1 Clock Setting
When the first use, DSP1 shows a flashing“0：00”.
Set the time, turn PT1 to the right and left to increase or decrease the hours.
After setting the hour, press it once to set the minutes. Turn it the right and
left to increase or decrease the minutes and press it to set the current time，
after the setting, press PT1 to confirm. The symbol“ ”displays, and the
indication lamp stops flashing.23 hours and 59 minutes can be set as maximum.
When you want to set clock again, keep P T 1 p r e s s e d f o r 3 s e c o n d s , D S P 1 , Led d i s p l a y
begin flashing, set c l o c k a c c o r d i n g t o C l o c k S e t t i n g p r o c e d u r e ( w h e n t h e r e i s n o a n y
operations in 10 seconds ,it will go to next instruction automatically)
(
7.2 Instructions of water level.
Initial state，transparent water tank into position in original state, you w i l l
hear sound and water level indicator“ ”light. if the transparent water tank
water is not reach to level, Now the appliance does not work until water was been
pour into box on the “MAX” position.
Note: 1、Please take out water tank, through t h e t a n k t o p s m a l l f l i p whole injection,
please note that water not overflow, Overflow water please wipe clean.
2、In the working status water, open the door, please do not go directly to
extraction tank, be careful steam scald, suggest you half open the door for a while,
then take out water tank 。
8、Functions
8.1 Choose Functions
In standby state, press PT2 boot option, to the right or to the left PT2 rotating
selection function, the selected function icon shown in DSP3, DSP1 on display is
the default cooking time and the corresponding preset parameter (program,
temperature, weight, etc.) are alternate displayed in the DSP2.
Note:1 、 When the furnace chamber temperature reached the set temperature,
temperatures icon“ ” stop twinkle, long light display.
2、 In the work process, at the same time press PT1, PT2, can view before the
furnace chamber temperature center (shown in DSP2).
!
!
8.2 Steam Functions
In standby state, press PT2 boot option, rotate PT2 selected steam function
“ ”DSP1 display default time 10 minutes, DSP2 display default steam temperature
100℃.
Press PT1, rotate PT1 temperature setting.
Then click on the PT1, rotating PT1 set cooking time, set the cooking time,
press PT2, cooking began to work. , steam function icon“ ” and temperature
icon“ ”scintillation display, work time icon“ ”and high water level
icon“ ”long light display.
Temperature range: 40-100 ℃
The longest working time: 90:00
8.3 Cooking for Meats (Automatically)
Choose steamed meat function “ ”,DSP1 display default time 30:00 minutes,
DSP2 default steam temperature is 100 ℃ and program C1 shine alternately
Press PT1, rotate PT1 set procedures
Then click on the PT1, rotating PT1 set cooking time, set the cooking time,
press PT2, cooking began to work. , steam m e a t f u n c t i o n i c o n “ ” a n d t e m p e r a t u r e
icon“ ”scintillation display, work time icon“ ”and high water level
icon“ ”long light display.
Notice: Temperature of foods will flash alternately.
Different meats have different temperature; you can refer to the following table.
8.4 Cooking for Fish (Automatically)
Choose steamed fish fun ction “ ”,DSP1 display default time 25:00 minutes,
DSP2 default steam temperature is 80 ℃ and program b1 shine alternately
Press PT1, rotate PT1 set procedures.
Then click on the PT1, rotating PT1 set cooking time, set the cooking time, press
PT2, cooking began to work. , steam fish function icon“ ” and temperature
icon“ ”scintillation display, work time icon“ ”and high water level
icon“ ”long light display.
Notice: Temperature of foods will flash alternately.
!
!
Different fish have different temperature; you can refer to the following table.
8.5 Cooking for Vegetables (Automatically)
Choose steamed vegetables function “ ”,DSP1 display default time 20:00
minutes, DSP2 default steam temperature is 100 ℃ and program A1 shine alternately
Press PT1, rotate PT1 set procedures.
Then click on the PT1, rotating PT1 set cooking time, set the cooking time, press
PT2, cooking began to work. , steam vegetables f u n c t i o n i c o n “ ” a n d t e m p e r a t u r e
icon“ ”scintillation display, work time icon“ ”and high water level
icon“ ”long light display.
Notice: Temperature of foods will flash alternately.
Different vegetables have different temperature; you can refer to the following
table.
8.6 Grill Functions (Steam Oven function)
Choose grill function “ ”,DSP1 display default time to minutes, DSP2
display default steam temperature 200 ℃.
Press PT1, rotate PT1 temperature setting
Then click on the PT1, rotating PT1 set cooking time, set the cooking time,
press PT2, cooking began to work; , grill function icon“ ” and temperature
icon“ ”scintillation display, work time icon“ ”and high water level
icon“ ”long light display .
Temperature range: 140-200 ℃
!
!
The longest working time: 90:00
8.7 Pizza Function (Steam Oven function)
Choose pizza function “ ”, DSP1 no display, DSP2 display 200 g
Press PT1, rotate PT1 for weight setting, set the weight, press PT2, cooking
began to work; pizza function icon “ ” scintillation display, work time
icon“ ”long light display.
Programs will calculate cooking time according to weight
Pizza
（g）
Time
（minuets）
Step
Weight
（g）
Pizza
(g）
Time
（minuets）
Step
Weight
（g）
100
0:30
650
11:52
150
1:30
700
12:54
200
2:34
750
13:56
250
3:35
800
14:58
50
300
4:38
350
5:40
400
6:42
450
7:44
500
8:46
550
9:48
600
10:50
50
8.8 Defrost Function（Edit Menu）
Choose thaw function “ ”, D S P 1 d i s p l a y d e f a u l t t i m e 10 m i n u t e s , D S P 2 no show
Press PT1, rotate PT1 set cooking time, set the cooking time, press PT2, cooking
began to work; thaw function icon “ ” a n d t e m p e r a t u r e i c o n “ ”scintillation
display, work time icon“ ”"and high water level icon“ ”long bright display
Thaw means USES steam thawing, automatic temperature control in 50 ℃ to 60 ℃
8.9 Reheating and Disinfecting Functions
Choose steamed Disinfecting function “ ”,DSP1 display default time 13:00
!
!
minutes, DSP2 default steam temperature is 100 ℃ and program r1 shine alternately
Press PT1, rotate PT1 set procedures.
Then click on the PT1, rotating PT1 set cooking time, set the cooking time, press
PT2, cooking began to work. , steam Disinfecting function icon“ ” and
temperature icon“ ”scintillation display, work time icon“ ”and high water
level icon“ ”long light display.
Notice: Temperature of foods will flash alternately.
Different Disinfecting h a v e different temperature; you c a n r e f e r t o t h e f o l l o w i n g
table.
)
9、Delay Time
When PT1 is pressed to define a delayed start time the corresponding light
“ ” s tar ts t o bl ink. DSP1 sh ows the cur ren t ti me a nd D SP2 shows ‘ AUT O’. Tur n
PT1 to the right or left to change the delayed start time. Press PT2 once to confirm
the delayed start time.
DSP1 shows the delayed start time you set and DSP2 shows “AUTO”
Press PT2 for 3 seconds if you want to cancel the selected function.
10、Pause in the process of cooking
10.1 Pause or Cancel Cooking
You can stop the cooking process at any time by pressing PT2.
Open the door in the process of cooking to pause (not be recommended due to lots
of vapors may hurt you)
Keep pressed PT2 for 3 seconds; you will hear sound and the process will be
canceled.
Notice: Keep a certain distance when you open t h e a p p l i a n c e d o o r d u e t o l o t s o f vapors
may hurt you
10.2 Modifying Parameters
The operating parameters (time\temperature\weight) can only be modified when
the cooking process has been interrupted. Proceed as follows:
Press PT1 and turn it to left or right to modify parameters, Press
PT1 once to confirm.
Press PT2 to continue cooking
!
!
10.3 Standby mode
Choose any a function, In all set up after the parameters, There is no
confirmation according to PT2 thing before (Cooking did not open) , Long
according to PT2 button to enter standby state.
Choose any a function, Press PT2 key, Cooking program open, Long according to
PT2 key until screen DSP1 scintillation display PUMP, we can rotate PT2 key to
choose again function.
In standby mode, press PT2 button to enter shutdown mode。
11、End steam grill function
11.1 With steam function of the end of program
With steam function program end or long according to PT2 cancel the program,
DSP1 digital tube scintillation shows “PUMP IN”, electronic board buzzer in 5
minutes every 30 seconds “drop, drop, drop” ring 3 sound; At this time DSP1
scintillation shows “PUMP IN” s a i d b a c k e x t r a c t i o n , a u t o m a t i c w a t e r P U M P t h e w a t e r
tank water back to the boiler smoke, screen flicker shows “PUMP OUT” s a i d p r o g r a m
automatically water in boiler smoke back to water tank, back after the extraction
automatically stop and return to standby state.
If in the boiler water temperature higher than 75 ℃, DSP1 and DSP2 has been
scintillation shows “PUMP HOT”, when the water temperature below 75 ℃, screen
flicker shows “PUMP OUT” said program automatically water in boiler smoke back
to water tank, back after the extraction automatically stop and return to standby
state.
11.2 With no steam function of the end of program
In a steam function after cooking, electronic board buzzer “drop, drop, drop”
ring 3 sound, screen shows “End” (End) scintillation display, in 5 minutes
intervals of 30 seconds buzzer “drop, drop, drop” ring 3 sound, screen shows
“End” have been scintillation, 5 minutes prototype into standby mode. When open
the door or click the PT2 key, prototype into standby mode.
12、Demonstration and Child lock
12.1 Demonstration
With the appliance in OFF status, keep PT1 pressed until the message OFF SHO
appears on DSP1. This means that the SHOW ROOM function (which disables all the
heating elements so that only the control panel works) is not active.
Turn PT1 to the right or left to activate (ON SHO) or deactivate (OFF SHO) this
function. To use the appliance normally, set OFF SHO.
If you press PT2 after activating demonstration mode, the message SHO will
appear on DSP2 in any function of baking startup.
After setting the parameter required, press PT2 to return the oven to the
initial standby status.
12.2 Child Lock
Steam furnace in OFF (closed) mode, don't show the clock, show only clock mark
“ ” state, h old PT1 unti l DSP1, appear o n the DSP2 OF F SH O, then clic k th e PT1
!
!
until DSP1, appear on the DSP2 OFF bLOC.
Rotary PT1 can choose child lock a ct iva ti on fu nc ti o n O N b LO C a nd cl o si ng OF F
bLOC, when DSP1, DSP2 display ON bLOC, press the PT2 confirm activation child lock,
DSP4 display icon “ ”.
After lock, regardless of PT1 or PT2 key, on the screen will show “bLOC”
3 seconds, and then return to the interface of the before.
12.3 Two kinds of release method
Temporary release: hold PT1 DSP4 until the symbol “ ” disappear, at this
time can undertake any function operation and parameter modification, 2 minutes
later, and into the child lock. Temporary release 2 minutes no matter in standby
state or working status, 2 minutes right after automatic into child lock.
13 、Descaling
Warning: In order to your safety, D escaling will take 45 minutes
and can not be interrupted.
You can either open or close the oven door when you begin descaling，procedures
are as follows:
With the appliance in OFF status, keep PT1 pressed until OFF SHO appears on
DSP1,press PT1 continuously until ENTR CAL appear on DSP1 and DSP2.Descaling
indicator“ ”light.
If cancel the function, press PT1 button to enter standby mode
Press PT2 key, digital tube display "PUMP IN" said back extraction system open
When “0.5L” appears, that shows you should add 0.5 L descaling solution to
water box.
Press PT2 to start descaling function, it will take 30 minutes.
When “1.0L” appears, that s h o w s y ou should add 1.0 L cold water to water box.
Press PT2 to start program, when “CAL END” appears that shows descaling
function is end.
Press PT2 after it is end to return to start status.
Time interval of descaling depends on Hardness of water and frequency o f u s e . If every
week use steam function 4 of x30 minutes, i n o r d e r t o e x t e n d o u r s t e a m f u r n a c e l i f e ,
we suggest you 6 months after a scale removal function.
Note: in the descaling function before water in boiler is empty to smoke; If the
boiler inside still withhold water inside, in the operation scale removal function
of time, the program can't normally open.
14、Cleaning and Maintenance
Before cleaning your oven or p e r f o r m i n g m a i n t e n a n c e , please cut
off the power supply.
In order to prolong the service life of steam oven, please note the
following points：
The enameled or stainless steel parts should be washed with lukewarm water
without using any abrasive powders or corrosive substances which could ruin
!
!
them ;Stainless steel could get stained .If these stains are difficult to remove,
use special products available on the market. After cleaning, it is advisable
to rinse thoroughly and dry.
The inside of the oven should preferably be cleaned immediately after use, when
it is still warm, with hot water and soap; the soap should be rinsed away and
the interior dried thoroughly. Avoid using abrasive detergents (for example
cleaning powders, etc) and abrasive sponges for dishes or acids (such as lime
scale –remover, etc„) as these could damage the enamel .If the grease spots
and dirt are particularly tough to remove, use a special product for oven
cleaning, following the instructions provided on the packet. Never use a steam
cleaner for cleaning inside of oven.
Suitable for descaling of cleaner, such as liquid coffee machine descaling
cleaner. Share not with foam cleaner.
Avoid using grinding sand mold cleaner, such as wash mat, steel wire ball, etc,
may damage the surface
Important: please don't water tank in the dishwasher cleaning.
Replacing the oven lamp:
1）Disconnect the oven from the power supply by means of the Omni p o l a r s w i t c h u s e d
to connect the appliance to the electrical mains ;or unplug the appliance if the
plug is accessible ;
2）Remove the glass cover of the lamp-holder ;
3）Remove the lamp and replace with a lamp resistant to high temperatures with the
following characteristic.
Voltage：220-240V
Wattage：25W
Type：E14
4）Replace the glass cover and reconnect the oven
to The mains Power supply.
15、Display Information
Display!
Description!
Descaling)
The!appliance!need!to!descale!
CAL)
!
0.5L)
Add!0.5!liter!descaling!so l u tion!to!w a te r!b ox!
1.0L)
Add!1.0!liter!cold!water!t o !water!bo x !
Water)box) )
TAN)
Installatio n !er ro rs !
Reduce!vapor!and!water!backflow!
VRP)
Reduce!vapor!function!is!running!
PUMP)IN)
Tips!are!from!the!tank!to!the!boiler!pumping!
PUMP)OUT)
Tips!are!from!the!boiler!to!the!tank!b a c k!pump in g!
warning)
HOt)
Too!high!temperature!
door!
Door!not!installed! !
!
!
Err)PUMP!
Flow!meter!sucking!water!the!latter!to!get!a!sm all!am o u nt!of!w a ter!
16、Trouble shooting
Warning: Maintenance should be done by a professional mechanic.
Circumstances that doesn’t need a professional mechanic
With no display！
Check the time indicator on or off
With no response after press any button!
Check if safety lock is on or not.
Oven doesn’t work!
Check the plug plugged well
Check the oven power connected or not。
Make sure the oven door closed tightly and rightly.
Ensure nothing caught between the door and front panel of the cavity.
Strange noise happens when oven is in operation!
Check if metal objects inside the oven arced or not.
Check if vessel touches inner wall of oven by accident.
Check if baking equipment becomes loose or not.
The oven can’t heat or heat very slowly!
Usage of metal vessel by accident.
Check if running time and fire gear setting is appropriate.
Food put in the oven is too big.
There is still noise after the Microwave Oven stops working!
This is normal; it takes some time for cooling fan to cool down.
Lamp doesn’t work after connecting power!
It doesn’t influence the usage of Microwave Oven if other functions work well.
)
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
Rubine RSO-IAS8-35GX User manual
- Category
- Ovens
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
