DFI EC700-BT3054 User manual

Category
Chassis components
Type
User manual

This manual is also suitable for

1
EC700-BT3054 Installation Guide
Package Contents
DFI reserves the right to change the specications at any time prior to the product's release. For the latest revision and for more details
of the installation process, please refer to the user's manual on the website.
www.d.com
Note:
The CD that came with the system contains an autorun screen to install drivers, utilities, and software
applications required to enhance the performance of the system and a user's manual for your reference.
Insert the CD into a CD-ROM drive. The autorun screen will appear. If after inserting the CD, “Autorun”
did not automatically start, please go directly to the root directory of the CD and double-click “Setup”.
Please install all required drivers.
1 EC700-BT3054 system unit
• 6
Mounting screws for Mini PCIe module
1 Quick Installation Guide
1 CD disk includes:
- Drivers / Manual
2
Installing a 2.5" SATA Drive
1. Locate the SATA drive bay on the system board. Remove the 4 mounting screws that secure the
drive bay to the system board.
2. Align the mounting holes of the SATA drive with the mounting holes on the HDD bracket and connect
the SATA data and power cable to the 2.5" SATA drive. Then, use the 3 provided mounting screws
to secure the drive in place.
Mounting Screws
Mounting Screw
2.5" SATA drive
Mounting Screw
Mounting Screw
SATA drive bay
SATA data and power cable
3
3. Place the SATA drive bay into the chassis. Secure the SATA drive bay with the mounting screws you
removed in step 1. And connect the SATA data cable and SATA power cable to the connectors on the
system board.
Mounting Screw
SATA power cable
SATA power connector
SATA data cable
SATA connector
Mounting Screw
4
Board Layout and Jumper Settings
934-EC7001-0A0G
A39801542
TOP BOTTOM
1
2
Battery
Mic-in
14
Clear CMOS
Data (JP24)
Buzzer
1
1
eMMC
(optional)
SATA 1
14
SATA
Power
1
SATA 2.0
1 1
mSATA
MicroSD
1
1
DDR3L
DDR3L
DDR3L
DDR3L
Mini PCIe
USB 0
USB 3.0
LAN 4
LAN 3
Reset
Power
COM 4/8-bit DIO
LAN 4
LAN 3
LAN 4
LAN 3
LAN 1
LAN 2
DC-in
(JP21)
1 3
1210
1 3
1210
(JP22)
Intel
WGI210AT
iTE
IT8528E
1
2 10
9
USB 5
USB 2.0
SPI
Flash
BIOS
COM 3
COM 2
1
1
(JP20)
(JP18)
(JP17)
1
VGA/DVI-I
Chassis
Intrusion
HDD
LED
USB 2
USB 7
USB 1
USB 6
USB 2.0
USB 2.0
USB 2.0
USB 2.0
USB 1-2 Power
Select (JP6)
USB 5-7 Power
Select (JP7)
Auto Power-on
Select (JP25)
USB 3 Power
Select (JP5)
COM 4/Digital I/O Select
Digital I/O 0-3 Output State
Digital I/O Power Select
Digital I/O 4-7 Output State
(JP17)
(JP20)
(JP22, JP21)
(JP18)
DDR3L
DDR3L
DDR3L
DDR3L
Intel Atom
E3800 Series
SIM Card
Realtek
ALC886
ASMedia
ASM1442
ASMedia
ASM1182
Intel
WGI210AT
Intel
WGI210AT
Intel
WGI210AT
SMSC
USB4604
Standby
Power LED
Nuvoton
NCT6106D
USB Power Select: 0 (JP5), 1-2 (JP6), 5-7 (JP7)
+5V_standby (default) 1-2 On
+5V 2-3 On
Clear CMOS Data JP24
Normal (default) 1-2 On
Clear CMOS Data 2-3 On
Auto Power-on Select JP25
Power-on via power button (default) 1-2 On
Power-on via AC power 2-3 On
Note:
You cannot use COM 4 and DIO at the same time. Please set up JP21
and JP22 together.
Digital I/O Output State
JP18 (DIO 4-7)
JP20 (DIO 0-3)
GND (default) 1-2 On
+5V or +5V_standby 2-3 On
Digital I/O Power Select JP17
+5V_standby 1-2 On
+5V (default) 2-3 On
www.d.com
COM 4/DIO Select JP21, JP22
COM 4 (default)
1-2, 4-5
7-8, 10-11 On
DIO
2-3, 5-6
8-9, 11-12 On
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

DFI EC700-BT3054 User manual

Category
Chassis components
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI