BEGLEC DEVINE Owner's manual

Brand: BEGLEC

Model: DEVINE

Type: Owner's manual

This manual is also suitable for

GOBO SWEEPER

Version: 1.0

WWW.BEGLEC.COM

Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited.

DEVINE

Operation Manual

Mode d'emploi

Gebruiksaanwijzing

Bedienungsanleitung

Manual de instrucciones

Manual do utilizador

EN - DISPOSAL OF THE DEVICE

Dispose of the unit and used batteries in an environment friendly manner

according to your country regulations.

FR - DÉCLASSER L’APPAREIL

Débarrassez-vous de l’appareil et des piles usagées de manière écologique

Conformément aux dispositions légales de votre pays.

NL - VERWIJDEREN VAN HET APPARAAT

Verwijder het toestel en de gebruikte batterijen op een milieuvriendelijke

manier conform de in uw land geldende voorschriften.

DU - ENTSORGUNG DES GERÄTS

Entsorgen Sie das Gerät und die Batterien auf umweltfreundliche Art und

Weise gemäß den Vorschriften Ihres Landes.

ES - DESHACERSE DEL APARATO

Reciclar el aparato y pilas usadas de forma ecologica conforme a las

disposiciones legales de su pais.

PT - COMO DESFAZER-SE DA UNIDADE

Tente reciclar a unidade e as pilhas usadas respeitando o ambiente e em

conformidade com as normas vigentes no seu país.

ENGLISH OPERATION MANUAL

JB SYSTEMS

1/28 DEVINE

Thank you for buying this JB Systems

product. To take full advantage of all possibilities and for your own

safety, please read theseoperating instructions very carefully before you start using this unit.

FEATURES

This unit is radio-interference suppressed. This product meets the requirements ofthe current European and

national guidelines. Conformity has been established and therelevant statements and documents havebeen

deposited by the manufacturer.

 This device has been designed to produce decorative effect lighting and is used in light showsystems.

 A small but fabulous gobo flower with prism effect

 Very bright, laser-like beams

 Equipped with gobo wheel, inner reflector and 3facet prism

 Sound activated with built-in micro

 Adjustable focus

 Fan cooling and thermal switch protection

 Multifunctional stand adapter

 3mode switch forinternal gobo wheel:

 Continuous rotation

 Sound activated rotation

 No rotation

 Perfect for small applications: bars, mobile DJs, home, …

BEFORE USE

 Before you start using this unit, please check ifthere’s no transportation damage. Should there be any, do

not usethe device and consult your dealer first.



Important:

This device left our factory in perfect condition and well packaged. It is absolutely necessary

for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused

by mishandling is not subject to warranty. The dealerwill not accept responsibility for any resulting defects

orproblems causedby disregarding this usermanual.

 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user

manual.

Check thecontents:

Check that the carton contains the following items:

 Operatinginstructions

 “Devine” effectunit

 Multifunctional stand adapter

 Lamp

SAFETY INSTRUCTIONS:

CAUTION: To reduce the risk of electric shock, do not remove the top cover.

No user-serviceable parts inside. Refer servicing to qualified service

personnel only.

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use

or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of

important operation and maintenance (servicing) instructions in the literature accompanying this

appliance.

This symbol means: indoor use only.

This symbol means: Read instructions.

This symbol determines:the minimumdistance from lighted objects. Theminimum distance between

light-output and the illuminated surface must be more than 0,5 meters.

CAUTION

ENGLISH OPERATION MANUAL

JB SYSTEMS

2/28 DEVINE

 To protect the environment, please try to recycle the packingmaterial asmuch as possible.

 A new light effect sometimes causes some unwanted smoke and/or smell. This is normal and disappears after some

minutes.

 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it

into awarm room after transport. Condense sometimesprevents the unit from working at full performance or may even

causedamages.

 This unit is for indoor use only.

 Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign object

enters the unit,immediately disconnect the mainspower.

 Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture must be fixed

at least 50cm from surrounding walls.

 Don’t cover any ventilationopenings as thismay result in overheating.

 Prevent use industy environments andclean the unit regularly.

 Keep the unitaway from children.

 Inexperiencedpersons should notoperate thisdevice.

 Maximum save ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.

 Make sure the area belowthe installationplaceis free from unwanted persons during rigging,de-rigging andservicing.

 Allowthe device about 10minutes to cool downbefore replacingthe bulb or start servicing.

 Always unplug the unit whenit is not used for a longertime or before replacing the bulb or start servicing.

 The electrical installation should be carried out by qualified personal only, according to the regulations for electrical

and mechanical safety in your country.

 Check that the available voltageis not higher than the one stated on the rearpanel ofthe unit.

 The power cord should always be in perfect condition. Switch the unit immediately off when the power cord is

squashed ordamaged.It must bereplaced bythe manufacturer, its serviceagent orsimilarly qualified persons inorder

to avoid a hazard.

 Never letthe power-cordcomeinto contact with other cables!

 This fixture mustbe earthed to in order comply with safety regulations.

 Don’t connect the unit to any dimmer pack.

 Always use an appropriate andcertifiedsafety cable when installingthe unit.

 In order to prevent electric shock, do not open the cover. Apart from the lamp and mains fuse there are no user

serviceable partsinside.

 Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same type and

electricalspecifications!

 Inthe event of serious operating problems, stop using the fixture and contact your dealerimmediately.

 The housing andthe lenses must bereplaced if they arevisibly damaged.

 Please use the original packingwhen the deviceis tobe transported.

 Due to safety reasonsitis prohibited to make unauthorizedmodifications to the unit.

Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering from

epilepsy.

DESCRIPTION:

1. Manual focusadjustment

2. Multifunctional stand adapter

3. Mounting hole (M8) to fix a mounting hook like for

example CR16/30.

4. Two holes that make is easy to mount the unit on

a vertical surface.

5. 3-mode switch for theinternal gobo wheel.

6. Mains power cable

7. Fuseholder

8. Lamp compartment with cooling fan

9. Internal microphone

10. 3-facet prism

ENGLISH OPERATION MANUAL

JB SYSTEMS

3/28 DEVINE

LAMP (RE)PLACEMENT

In case of replacement of the lamp or maintenance,

do not open the fixture within 10 minutes until the

unit cools down after switching off. Always unplug

the unit before servicing! Always use the same type

of spare parts (bulbs, fuses, etc.) When replacing parts, please

only genuine spare parts.

 Switch off theunit and unplug the mains cable.

 Wait forabout 10 minutes until the unithas been cooled down.

 Unscrew the screw that closes the lamp compartment of the fixture

(see “A” on the picture ).

 On the inside you will see the lamp socket. (see “B” on the picture

)Tear the lamp socket gently out of the lamp compartment.

 Unplug the old lamp. Hold the lamp socket while unplugging the

lamp instead of pulling the cable!

 Hold the lamp socket while pressing the new lamp gently in the

socket.

Attention! Check the label on the backside of the device or see the

technical specifications in this manual toknow which lamp should be

used. Never install lamps with a higher wattage! Lamps with higher

wattage generate temperatures the device was not designed for. If

the device uses a lamp transformer, it will burn due to current

overload.

 Don’t touch the bulb inside the reflector of the lamp with bare hands!

This drastically shortens the lifespan of the lamp. If you touched the

lamp, clean it with a cloth and a little denatured alcohol. Wipe the

lamp off before installing.

 Put the new lamp back inside the unit. Be sure that the wires don’t

touch thelamp.

 Close the lamp compartment withthe screw.

 Done!

OVERHEAD RIGGING



Important: The installation must be carried out by qualified service personal only. Improper

installation can result in serious injuries and/or damage to property. Overhead rigging requires

extensive experience! Working load limits should be respected, certified installation materials

shouldbe used, the installed device should be inspected regularly for safety.

 Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging

andservicing.

 Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The

fixture must be fixed

at least 50cm

fromsurroundingwalls.

 The device should be installed out of reach of people and outside areas wherepersons may walk by or be

seated.

 Before rigging make sure that the installation area can hold a minimum point load of 10times the device’s

weight.

 Always use a certified safety cable that can hold 12times the weight of the device when installing the unit.

This secondary safety attachment should be installed in a way that no part of the installation can drop

more than 20cm if the main attachment fails.

 The device should be well fixed; a free-swinging mounting is dangerous and maynotbe considered!

 Don’t cover any ventilation openings asthis may result in overheating.

 The operator has to make sure that the safety-relatingand machine-technical installations are approved by

an expert before using them for the first time. The installations should be inspected every year by a skilled

person to be sure that safety is still optimal.

ENGLISH OPERATION MANUAL

JB SYSTEMS

4/28 DEVINE

OPERATING INSTRUCTIONS

 Once connected to the mains the device startsrunning.

 The3-mode switch (5) can be used to control the internal gobowheel of the unit:

Switch set to“STOP”: no rotation

Switchset to “AUTO”:

continuousrotation

o Switch set to“SOUND”:

sound activatedrotation

 Regular breaks during operation are essential to maximize the life of this device as it is not designed for

continualuse.

 Do not switch the unit on and off in short time intervals as this reduces the lamp life.

 Always unplug the unit when it is not used fora longer timeor before replacing the bulb or start servicing.

 In the event of serious operating problems, stop using the fixture and contact your dealer immediately.

 Important: Never look directly into the light source! Don’t use the effect in the presence of persons

suffering from epilepsy.

MAINTENANCE

 Make surethe area below the installation place is free from unwanted persons during servicing.

 Switch off theunit, unplug the mains cable and wait until theunit hasbeen cooled down.

During inspection the following points should be checked:

 All screws used for installing the device and any of its parts should be tightly fastened and may not be

corroded.

 Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any

deformation.

 When an opticallens is visibly damaged dueto cracks or deep scratches, it mustbe replaced.

 The mains cables must be in impeccable condition and should be replaced immediately when even a

small problem is detected.

 In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be

cleaned monthly.

 The interiorof the deviceshould be cleaned annually using a vacuum cleaner or air-jet.

 The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to

optimize light output. Cleaning frequency depends on the environmentin which the fixture operates: damp,

smoky or particularly dirty surroundings can cause greater accumulation ofdirt on the unit’s optics.

 Clean with a soft cloth using normalglass cleaning products.

 Always dry the parts carefully.

 Clean the external opticsat least once every 30 days.

 Clean the internal optics at least every 90 days.

Attention: We strongly recommend internalcleaningto be carried out by qualified personnel!

SPECIFICATIONS

Mains Input: AC 230V, 50Hz

Fuse: 250V 3,15A slow blow(20mmglass)

SoundControl: Internal microphone

Lamp: EFP 100W / 12V

Size: 31,4 x 20,5 x 21,7cm

Weight: 2,7kg

Every information is subject to change without prior notice

You can download the latest version of this user manualon our website: www.beglec.com

Page is loading ...

BEGLEC DEVINE Owner's manual

Brand: BEGLEC

Model: DEVINE

Type: Owner's manual

This manual is also suitable for

GOBO SWEEPER

Download PDF

report

in other languages

français: BEGLEC DEVINE Le manuel du propriétaire
español: BEGLEC DEVINE El manual del propietario
Deutsch: BEGLEC DEVINE Bedienungsanleitung
Nederlands: BEGLEC DEVINE de handleiding
português: BEGLEC DEVINE Manual do proprietário

BEGLEC DEVINE Owner's manual

This manual is also suitable for

BEGLEC DEVINE Owner's manual

in other languages

Related papers

Other documents