Foster FSL400G (11-104) Owner's manual

Brand: Foster

Model: FSL400G (11-104)

Category: Alarm clocks

Type: Owner's manual

This manual is also suitable for

slimline range

Foster FSL400G (11-104) is a refrigerator with a gross capacity of 380 liters. It has a settable temperature range of +1°C to +4°C, making it suitable for storing a variety of refrigerated products. The Foster FSL400G is designed to be energy-efficient, with an energy consumption of 2.1 kWh/24h. It is also designed to be easy to clean, with a stainless steel exterior and interior. Additionally, the Foster FSL400G is designed to be durable, with a robust construction and a long lifespan.

cabinet installation

and operating instructions

slimline range

Operating instructions

Notice d'installation

et d'utilisation

Bedienungsanleitung

operating instructions

Foster European Operations

Foster Refrigerator

Oldmedow Road, King’s Lynn,

Norfolk, PE30 4JU

England

Tel: 01553 691122

Fax: 01553 691447

Website: www.fosterrefrigerator.co.uk

Email: sales@foster-uk.com

a Division of ITW (UK) Ltd.

France

Foster Refrigerator France SA

Tel: (33) 01 34 30 22 22 Fax: (33) 01 30 37 68 74 Email: [email protected]

Germany

Foster Refrigerator Germany

Tel: (0781) 96 93 00 Fax: (0781) 96 93 019 Email: info@fosterrefrigerator.de

SLIMLINE0405 00-555734

Gebruiksaanwijzing

To adjust the position of the

shelves insert the shelf clip

into the vertical support with

the ‘hook’ pointing upwards

and ‘slot downwards’ into

position. Ensure the shelves

are parallel and level after

fitting.

Shelf/Tray Supports

installation

Positioning/unpacking

All models are normally fitted

with swivel castors. Ensure

during installation the unit is level

if not the door(s) may not close

correctly. Adjust castors by

inserting spacers under the

appropriate castor and the base

of the unit until level.

Castors/legs/feet

IMPORTANT:

To the installer: Installation of these units should be carried out by a competent person and

the appropriate codes of practice adhered to, thus ensuring safe installation.

Pass to the user: Do not discard this document: it contains important guidelines on

Operation, Loading, Cleaning and Maintenance and should be kept for reference.

english

Important : It is not advisable to position the cabinet adjacent to an intense heat source i.e. flame grill, oven,

hob, etc. as this may have an adverse effect on the machine and performance.

Unpacking: The unit is delivered on a pallet and shrink-wrapped. Documentation is inserted into a clear

pocket located inside the unit. Carefully remove the protective plastic film and cardboard from the

unit exterior and from the door opening surround making sure that any sharp instrument used does not cause

damage, plus remove any quality labels.

Cabinet removal from the pallet: Cut the plastic ties securing the cabinet to the pallet using a sharp knife

or scissors. Move the unit over the front of the pallet, carefully slide the unit off the pallet until it is stable on

the ground.

Cabinet

castors

DISPOSAL REQUIREMENTS

If not disposed of properly all refrigerators have components that can be

harmful to the environment. All old refrigerators must be disposed of by

appropriately registered and licensed waste contractors, and in accordance

with National laws and regulations.

english

If the unit has been laid on its back at any time DO NOT switch on immediately but leave in the upright

position for at least 60 minutes. To switch on the unit see ‘User Operation Guidelines’. Allow the unit to reach its

normal operating temperature before loading with product.

Switching On

start up

user operation guidelines

Controller

Initial Start Up

Your new Foster Cabinet will be delivered ready to run. Plug into the mains supply and the

unit will operate in the following way.

Start Up & Self Test: The indication is only displayed during the first three seconds

following the mains electrical power being applied to the unit. During this period the

controller performs a self-check.

Once the self-check has been completed will be displayed.

Operator Instructions

1. To Start the Unit

Press and hold for three seconds. The unit will start and the air temperature will be displayed.

2. To Check Storage Temperature Set Point

Check set point by pressing the button

Factory Temperature Set Point

Refrigerator +1˚C to +4˚C

Freezer -18˚C to -21˚C.

Exit from set up occurs after 10 seconds if no button is pressed.

3. Manual Defrost

To initiate a manual defrost press and hold will be displayed release.

On completion of the defrost will be displayed until the cabinet temperature is achieved and then it will revert to

displaying the normal cabinet temperature.

4. Set Unit to Standby.

Press display shows (standby indication)

Standby Indication

This indication is displayed while the unit is not operating but with mains power applied to the unit. This mode may be used for inter-

nal cleaning regimes and short periods when the unit is not required.

For extended periods of inactivity the mains supply should be isolated.

OFF

i set

❄

i set

❄

english

Alarms and Warnings

High temperature alarm

Will be displayed.

The alarm will sound but can be silenced by pressing any of the buttons, however it will return after the pre-set

designated period. If the unit returns to normal operating temperature the alarm etc. will be cancelled automatically.

If this does not occur after 4 hours call your Foster Authorised Service Company.

Low temperature alarm.

Will be displayed.

The alarm will sound but can be silenced by pressing any of the buttons and the unit will continue to operate,

however it will return after the pre-set designated period. If the unit returns to normal operating temperature the

alarm etc. will be cancelled automatically. If this does not occur after 4 hours call your Foster Authorised Service

Company.

Air Temperature Probe Failure.

Will be displayed.

The alarm will sound but can be silenced by pressing any button.

There is no further action that can be taken by the user in this instance; therefore call your Foster Authorised Service

Company as soon as possible. During this period the unit will continue to operate but have a reduced performance.

Evaporator Temperature Probe Failure. (Freezer Cabinets Only)

Will be displayed.

The alarm will sound but can be silenced by pressing any button.

There is no further action that can be taken by the user in this instance; therefore call your Foster Authorised Service

Company as soon as possible. During this period the unit will continue to operate satisfactorily, but this failure will

have an effect on the defrost and therefore efficiency if allowed to continue.

These should be inspected on a regular basis and replaced if damaged. To clean, wipe with a warm damp

soapy cloth followed by a clean damp cloth and finally thoroughly dry before closing the door.

Door Gaskets

cleaning/maintenance

Important Cleaning Instructions

Cared for correctly, the cabinet has the ability to resist corrosion and pitting for many years.

The following weekly cleaning regime is recommended.

a. Exterior and Interior: Wash with mild soapy water, rinse with clean water and dry thoroughly.

b. Door and bottom unit cover: Use a proprietary stainless steel cleaner following the

manufacturers instruction.

WARNING:

High alkaline cleaning agent or those containing bleaches, acids and chlorines are very harmful to

all materials. Corrosion and pitting may result from their accidental or deliberate application.

If any of these liquids should come into contact with the unit during general kitchen cleaning,

wipe down the affected area immediately with clean water and rub dry.

Never use wire wool or scouring powders on surfaces.

After cleaning allow the unit to reach its normal operating temperature before reloading with

product. During usage all spills should be wiped clean immediately but care should be taken not

to touch the interior of freezer units as warm skin can ‘freeze’ to metal cabinets.

Cleaning Instructions

N.B. Before internal cleaning, switch off unit.

Important: Disconnect the mains electrical supply to the machine prior to removing the condenser

compartment unit cover.

Remove the two screws located at the base of the condenser compartment unit cover and pull forward

taking care not to damage the interconnecting cables to the controller. Clean the condenser using a soft

brush or vacuum cleaner.

NOTE: if there are any stubborn grease deposits etc left on or through the condenser call your Foster

Authorised Service Company to carry out a full service.

Failure to carry out this action may invalidate the warranty of the condensing unit.

Condenser

operational failure

Checks must be carried out by a competent person.

Before calling a Foster Authorised Service Company check the following:

a) Power failure (may be off at source)

b) Fault conditions as described in User Operational Guidelines - Alarms and Warnings.

c) Damaged mains lead plug.

When requesting service assistance always quote the following:

a) unit serial number (E..........)

b) the model number from the serial number plate located inside the unit.

c) If a “Fault Code ” appears quote the “Fault Code Reference” to the Foster Authorised Service Company.

Problem Diagnosis

Cover all foods and

separate raw and cooked

foods.

Food

When loaded, ensure

that air can circulate

around / through

stored products.

Airflow

Evenly distribute the

load.

For Cabinets 40kg max

per shelf or 120kg per

full door section.

Do not stack product on

the base of the unit.

Load Distribution

40Kg

Cool hot food before

Cool Hot Food

Page is loading ...

Foster FSL400G (11-104) Owner's manual

Brand: Foster

Model: FSL400G (11-104)

Category: Alarm clocks

Type: Owner's manual

This manual is also suitable for

slimline range

Download PDF

report

in other languages

français: Foster FSL400G (11-104) Le manuel du propriétaire
Deutsch: Foster FSL400G (11-104) Bedienungsanleitung
Nederlands: Foster FSL400G (11-104) de handleiding

Foster FSL400G (11-104) Owner's manual

This manual is also suitable for

Foster FSL400G (11-104) Owner's manual

in other languages

Related papers

Other documents