Pairing a Bluetooth Device
1. Turn on the unit using the Power switch. The
Pairing/Line In Indicator will ash blue quickly,
and the unit will enter pairing mode.
When pairing, remain within 3 feet of the unit.
2. Using the native controls on your Bluetooth device,
select the “ISB23” in your Bluetooth settings to pair.
If your device requests a password, enter the default password “ 0 0 0 0
”. Refer to the user’s manual for your specic device for instructions on
pairing and connecting Bluetooth devices.
3. When successfully paired and connected, the
Pairing/Line In Indicator will display a solid blue
light and a beep will sound from the unit.
After initial pairing, the unit will stay paired unless unpaired manually by the user.
If problems arise with pairing, press the Pair button to begin pairing again.