Naxa NAB-4000 User manual

Naxa
Brand
Naxa
Model
NAB-4000
Type
User manual

Naxa NAB-4000

The Naxa NAB-4000 is a wireless audio adapter that allows you to connect your iPod or iPhone to a dock speaker system via Bluetooth. This eliminates the need for cables and allows you to enjoy your music wirelessly. The NAB-4000 is easy to use. Simply connect it to your dock speaker system and turn it on. The NAB-4000 will automatically connect to your iPod or iPhone when it is in range. You can also use the NAB-4000 to control your music playback. The NAB-4000 has a built-in microphone, so you can use it to make and receive phone calls.

Here are some of the features of the Naxa NAB-4000:

Naxa NAB-4000

The Naxa NAB-4000 is a wireless audio adapter that allows you to connect your iPod or iPhone to a dock speaker system via Bluetooth. This eliminates the need for cables and allows you to enjoy your music wirelessly. The NAB-4000 is easy to use. Simply connect it to your dock speaker system and turn it on. The NAB-4000 will automatically connect to your iPod or iPhone when it is in range. You can also use the NAB-4000 to control your music playback. The NAB-4000 has a built-in microphone, so you can use it to make and receive phone calls.

Here are some of the features of the Naxa NAB-4000:

Instruction Manual
NAB-4000
Wireless Audio Adapter with Bluetooth
®
for
iPod
®
and iPhone
®
Dock Connectors
Page 2 Naxa Electronics
At a Glance
Status Indicator
Power Off No light
Searching Slow ashing light
Pairing Quick ashing light
Connected Steady light
Press and hold the Power/Pair button for 3
seconds to turn the unit on or off.
Dock Connector
Connects the NAB-4000 to compatible iPod
dock speaker systems.
www.naxa.com Page 3
Connecting
1) Set your iPod audio dock to iPod mode.
(Refer to the manual of your iPod audio
dock for instructions.)
2) Connect the NAB-4000 to the iPod audio
dock. The dock connector is found on the
bottom of the unit.
3) The NAB-4000 will turn on automatically
and the status indicator will ash slowly.
A beep will sound when the unit has been
recognized.
Once connected for the rst time, the unit will
turn on automatically. If it does not, press and
hold the Pair button for 3+ seconds to turn it on.
To turn off the unit, press and hold the
Power/Pair button.
Page 4 Naxa Electronics
Pairing
Before using a wireless player with Bluetooth(r),
you will need to establish a connection between
it and your Naxa device. This process is called
“pairing” and you will only have to do it once.
Once two devices are paired, they will automat-
ically connect when they detect each other.
Wireless players with Bluetooth may include
laptops, tablets, smartphones, and more. Make
sure that your player has its Bluetooth radio
enabled and that it is set to be discoverable.
1) When the NAB-4000 turns on and has
been recognized, the Status indicator will
ash slowly (searching) and then ash
quickly (pairing).
2) While the unit is ashing quickly, use the
native controls of your Bluetooth device
to select the “NAB-4000”.
• If your device requires a password,
enter “0000”.
• Refer to the user’s manual of your
device for specic instructions for
pairing and connecting Bluetooth
devices.
Page 5 Naxa Electronics
Support
If you have problems with your device, please consult the instructions in this manual. Please
also visit us on the web at www.naxa.com to get up to the minute news, alerts, and documen-
tation for your device. For additional assistance, please contact Naxa Technical Support.
NAXA Technical Support
2320 East 49th St.
Vernon, CA 90058
http://www.naxa.com/naxa_support/
Page 6 Naxa Electronics
www.naxa.com Page 7
Naxa Electronics
2320 E 49th St
Vernon, CA 90058
www.naxa.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Naxa NAB-4000 User manual

Naxa
Brand
Naxa
Model
NAB-4000
Type
User manual

Naxa NAB-4000

The Naxa NAB-4000 is a wireless audio adapter that allows you to connect your iPod or iPhone to a dock speaker system via Bluetooth. This eliminates the need for cables and allows you to enjoy your music wirelessly. The NAB-4000 is easy to use. Simply connect it to your dock speaker system and turn it on. The NAB-4000 will automatically connect to your iPod or iPhone when it is in range. You can also use the NAB-4000 to control your music playback. The NAB-4000 has a built-in microphone, so you can use it to make and receive phone calls.

Here are some of the features of the Naxa NAB-4000:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents