Edlund KR-700 Datasheet

Type
Datasheet

This manual is also suitable for

Edlund introduces our new patent pending line of knife racks with the unique v-slot insert design. Now holds almost
double the amount of chefs knives as previous models plus room for smaller knives, a cleaver, steel, and even scissors, all in
the same space as before. NSF Certified and dishwasher safe!
KR-698, KR-699 and KR-700 Knife Racks
One knife rack that does it all
NSF Certified
Holds 8 chefs knives, plus 2 smaller
knives, 1 steel and scissors in the same
space as previous models
Insert is dishwasher safe and will not
dull knives
Stainless steel is corrosion resistant
Knife rack skirt (models KR-699
and KR-700) protects the knives and
operators from accidents
KR-700 has stainless steel back for
increased sanitation
Patented v-slot design holds knives
upright and more securely
Made in U.S.A.
We’re in your kitchen.
Edlund Company, Inc., 159 Industrial Parkway, Burlington, VT 05401 800-772-2126 www.edlundco.com
The KR-698 knife rack provides a system
of knife storage and retrieval while helping
to maintain a sanitary environment.
Open underbase allows operators
to quickly select the proper knife.
Front view of the KR-699 and KR-700
(14˝/35.6 cm longer skirt) with a
stainless steel skirt that protects knives
and operators from accidents.
WARRANTY INFORMATION: THE EDLUND COMPANY WARRANTS THESE PRODUCTS TO BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE YEAR FROM DATE OF PURCHASE. THE COMPANY’S OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING WITHOUT CHARGE ANY PART OR PARTS FOUND TO BE DEFECTIVE
UNDER NORMAL USE. IT IS THE RESPONSIBILITY OF THE PURCHASER TO RETURN THE ENTIRE UNIT TO THE FACTORY, TRANSPORTATION CHARGES PREPAID. THIS WARRANTY DOES NOT COVER PARTS THAT MUST BE REPLACED UNDER NORMAL USE, INCLUDING KNIVES AND DRIVE GEARS ON CAN OPENERS. NO OTHER WARRANTY, WRITTEN OR VERBAL, IS AUTHOR-
IZED BY THE COMPANY. WARRANTY INFORMATION OUTSIDE THE UNITED STATES MAY VARY, CONSULT YOUR DISTRIBUTOR.
12/06 ED01-4021
The patented approach to knife storage and protection.
Back view of the KR-699 and KR-700
shows differentiation of the KR-700’s
stainless steel back for increased sanitation.
New patented insert now holds up
to 10 chef’s knives plus scissors!
KR-698, KR-699 and KR-700 Knife Racks – NSF Certified
The most advanced knife rack system in the world. Edlunds KR-698, KR-699 and KR-700
Knife Racks meet todays knife storage needs with maximum efficiency and sanitation.
Keeps an even greater number of knives within easy reach. The new patented insert with
v-slot design holds knives more securely and upright, yet removes for easy cleaning.
One knife rack that does it all
NSF Certified
Holds 8 chefs knives, plus 2 smaller
knives, 1 steel and scissors in the same
space as previous models
Insert is dishwasher safe and will not dull
knives
Stainless steel surround is corrosion
resistant
Knife rack skirt (models KR-699 and KR-700)
protects the knives and operators from accidents
KR-700 has stainless steel back for increased
sanitation
Patented v-slot design holds knives upright and
more securely
Made in U.S.A.
MODEL # DESCRIPTION PRODUCT CASE CUBE CASE WEIGHT
CODE FT3/M3 LBS/KGS
KR-700
Knife Rack with 14˝ skirt and stainless steel back plate 39920 1.3/.04 12/5.4
KR-699
Knife Rack with 12˝ skirt and open back 39915 1.3/.04 10/4.5
KR-698
Knife Rack with short skirt for easy knife selection 39550 .2/.01 1/.45
Knife Rack Insert for KR-698, 699, 700 I013N 1/.45
SPECIFICATIONS:
  • Page 1 1
  • Page 2 2

Edlund KR-700 Datasheet

Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI