Lightolier PPH2G12FW232 is a direct/indirect 2' x 4' recessed fluorescent light fixture with a 12-cell white louver and lens overlay. It can accommodate two or three T8 lamps and has a variety of mounting options, including exposed T-bar, exposed slot T-grid, and acoustical material.
The fixture is designed for use in commercial applications and meets UL 1598, Paragraph 9.2.2.5 requirements for air return models. It has a 72.1% efficiency (2-lamp T8) or 67.8% efficiency (3-lamp T8) and is only 5" deep. The tension bars secure the ends to the body, and the fixture fits flush to the face of the slot grid (T) ceiling.
Lightolier PPH2G12FW232 is a direct/indirect 2' x 4' recessed fluorescent light fixture with a 12-cell white louver and lens overlay. It can accommodate two or three T8 lamps and has a variety of mounting options, including exposed T-bar, exposed slot T-grid, and acoustical material.
The fixture is designed for use in commercial applications and meets UL 1598, Paragraph 9.2.2.5 requirements for air return models. It has a 72.1% efficiency (2-lamp T8) or 67.8% efficiency (3-lamp T8) and is only 5" deep. The tension bars secure the ends to the body, and the fixture fits flush to the face of the slot grid (T) ceiling.
For Factory Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 a Philips Group Section 5/Folio M10-42
Lightolier is a Philips group brand
05/08
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Features
• Direct/indirect louver appearance with soft contoured interior.
• 12 cell flat white louver with lens overlay.
• Air return models meet UL 1598, Paragraph 9.2.2.5 requirements.
• 72.1% efficient (2 lamp T8).
• 67.8% efficient (3 lamp T8).
• Only 5" deep.
• Tension bars secure ends to body.
•
Same fixture fits both G and T ceiling types.
• Fits flush to face of slot grid (T) ceiling.
• Static, optional.
• Louver hinges from either side.
• End of louver gasketed to eliminate light leak.
• Built-in earthquake clips.
• Can be continuous row mounted.
• Wiring access plate standard.
• Meets NYC Code requirements.
• Construction to meet Chicago Plenum requirement is available.
Mounting Methods Dimensions
Paraplus II PPH2G12FW232 or 332
Page 1 of 2 Direct/Indirect 2' x 4' Recessed Fluorescent
12 Cell White Louver With Lens Overlay, 2 or 3 Lamp T8
24" (610mm)
5"
(127mm)
2-1/2"
(64mm)
2" x 2-1/2" Access Plate
with (2) 7/8" dia. K.O.
48" (1219mm)
exposed t-grid ceiling
exposed slot t-grid ceiling
Acoustical
material
by others
Exposed T-bar
by others
1-1/2"
max.
Acoustical
material
by others
15/16"
24"
1-7/8"
max.
Exposed T-bar
by others
9/16"
24"
air return flow
louver hinges
from either side
built-in earthquake clips
For Factory Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 a Philips Group Section 5/Folio M10-42
Job Information Type:
Lightolier is a Philips group brand
Ordering Information
Explanation of Catalog Number. Example: PPH2G12FW332120O3
Options/Accessories
Fusing: Internal fast blow fusing: SUFFIX: GLR.
Internal slow blow fusing: SUFFIX: GMF.
Drywall Kit: Order Catalog Number: FK92X4 and CF4FK SPACER.
Electrical Wiring Options: Consult factory.
Chicago Plenum: SUFFIX C.
Specifications
Performance: In an installation of 3 lamp 32W luminaires in a room cavity
ratio of 1, with reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not
be less than .72. To reduce glare the average brightness at 65° shall not exceed
1837 candelas per square meter. To control veiling reflections, luminaire output
in the 30°-90° zone shall not be less than 67.4%.
Materials: Chassis parts are die-formed code gauge steel. Housing has all
edges turned for safe-handling.
Finish: Chassis exterior – baked white post painted acrylic enamel. Cavity –
baked white post painted acrylic enamel. Louver – baked white post painted
acrylic enamel, minimum 86% reflectance. Phosphate undercoating.
Specifications (continued)
Overlay: M=Matte white acrylic .040 thick. W=Pattern 20 prismatic .140 thick. O=K20 with white
overlay. V=.095 acrylic pattern 12.
Electrical: Thermally protected class “P’ ballast C.B.M. approved, non PCB. If K.O. is within 3" of
ballast, use wire suitable for at least 90°.
UL Listed for damp locations.
Labels: I.B.E.W./UL and ULc Listed.
This product may have a mercury containing lamp. Manage in accord with Disposal Laws.
See: www.lamprecycle.org
Options:
Add appropriate
suffix to catalog
no., ie: (GLR)
Body Style:
H = Air Return
S = Static
2
Fixture
Width
G
Ceiling Type:
Fits both
Standard Grid
and
Slot Grid
12
Number
of Cells:
12=2 rows of
6 cells
32
Lamp:
(By Others)
32=T8
(Nominal 48")
Ballast Type:
<20THD<10THD
1 or 2 Lamp Elec. T8 SO * H
I *
1-3 Lamp Elec. T8 O3 *H3 *
LOL Dimming T8 PS
* –
*Instant Start Standard
Other dimming options. Consult factory.
NOTE:
For T8 UNV, you must use H
I
, H3
Ballast Code.
0.0 45.0 90.0 FLUX
0 1814 1814 1814
5 1804 1806 1805 172
15 1718 1739 1758 492
25 1581 1615 1677 748
35 1368 1393 1323 860
45 1045 1070 1051 796
55 637 598 603 562
65 392 392 379 391
75 205 166 139 191
85 43 38 37 45
90 000
Model No. PPH2G12FW232120SO
LER = FP - 64.8 IW - 57.0 BF - 0.87
Comparative yearly lighting energy cost per
1000 lumens = $3.70
Report Number: ITL51763
Catalog Number: PPH2G12FW232120SO
Lamps: F32T8/SPX35
Luminaire: Paraplus with white painted
interior, white painted 12 cell parabolic
louver with prismatic overlay.
Ballast: Howard Industries E2/32IS-120SC
Report is based on 2950 Lumens per lamp.
Efficiency: 72.1%
CIE Type-Direct-Indirect
Plane: 0-Deg 90-Deg
Spacing Criteria: 1.2 1.2
Shielding Angles: 90 90
Plane: 0-Deg 90-Deg
Luminous Length: 46.920 22.920
CANDELA DISTRIBUTION
0
AVERAGE AVERAGE AVERAGE AVERAGE
IN DEG. 0-DEG. 45-DEG. 90-DEG.
45 2113. 2163. 2125.
55 1588. 1465. 1503.
65 1326. 1326. 1282.
75
01132. 917. 768.
85
0705. 623. 607.
LUMINANCE DATA IN CANDELA/SQ. METER
COEFFICIENTS OF UTILIZATION –
ZONAL CAVITY METHOD. EFFECTIVE
FLOOR CAVITY REFLECTANCE 0.20
0
RC 80 50 30
RW 70 50 30 50 30 10 50 30 10
01797674727068696766
02736763646057615856
03676055575249555148
04625448514642494542
05574842464137454037
06524438423733413633
07494034383329373329
08463731353026343026
09433428322724322724
10 40 31 26 30 25 22 29 25 22
ZONE LUMENS % LAMP % FIXT
00-030 1412 23.9 33.2
00-040 2272 38.5 53.4
00-060 3630 61.5 85.3
00-090 4256 72.1 100.0
90-180
00000.0000.0
00-180 4256 72.1 100.0
ZONAL LUMEN SUMMARY
Model No. PPH2G12FW332120O3
LER = FP - 63.2 IW - 85.0 BF - 0.88
Comparative yearly lighting energy cost per
1000 lumens = $3.79
Report Number: ITL51761
Catalog Number: PPH2G12FW332120O3
Lamps: F32T8/SPX35
Luminaire: Paraplus with white painted
interior, white painted 12 cell parabolic
louver with prismatic overlay.
Ballast: Howard Industries E3/32IS-120SC
Report is based on 2950 Lumens per lamp.
Efficiency: 67.8%
CIE Type-Direct-Indirect
Plane: 0-Deg 90-Deg
Spacing Criteria: 1.2 1.3
Shielding Angles: 90 90
Plane: 0-Deg 90-Deg
Luminous Length: 46.920 22.920
0.0 45.0 90.0 FLUX
0 2468 2468 2468
5 2457 2460 2459 234
15 2337 2380 2430 675
25 2166 2261 2406 1049
35 1891 2039 2069 1256
45 1464 1576 1530 1165
55 884 828 840 787
65 543 520 498 524
75 285 224 184 253
85 59 50 18 59
90 000
CANDELA DISTRIBUTION
0
AVERAGE AVERAGE AVERAGE AVERAGE
IN DEG. 0-DEG. 45-DEG. 90-DEG.
45 2960. 3186. 3093.
55 2203. 2064. 2093.
65 1837. 1759. 1684.
75 1574. 1237. 1006.
85 968. 820. 787.
LUMINANCE DATA IN CANDELA/SQ. METER
COEFFICIENTS OF UTILIZATION –
ZONAL CAVITY METHOD. EFFECTIVE
FLOOR CAVITY REFLECTANCE 0.20
0
RC 80 50 30
RW 70 50 30 50 30 10 50 30 10
01757269676564656362
02696459605754585553
03635651534946524846
04585145484440464339
05544540433935423835
06504135393531383431
07493832353128353127
08433429332825322825
09403226302622302522
10 38 29 24 28 24 20 28 22 20
ZONE LUMENS % LAMP % FIXT
00-030 1958 22.1 32.6
00-040 3214 36.3 53.5
00-060 5166 58.4 86.1
00-090 6002 67.8 100.0
90-180
0000 00.0 000.0
00-180 6002 57.8 100.0
ZONAL LUMEN SUMMARY
Voltage:
120, 277 or
UNV=120-277
Paraplus II PPH2G12FW232 or 332
Page 2 of 2 Direct/Indirect 2' x 4' Recessed Fluorescent
12 Cell White Louver With Lens Overlay, 2 or 3 Lamp T8
F
Flat White
Louver
and Body
Lamp
Quantity
2=2 Lamp
3=3 Lamp
Paraplus II
PP
Standard Paraplus II
PY
For NYC Code – I.B.E.W. Manufactured
P3
For NYC Code – Local 3 Manufactured
Lens
Overlay:
M =Matte White
Acrylic .040
Thick
W =Pattern 20
Prismatic
.140 Thick
O =K20 with
White Overlay
V =.095 Pattern 12
-
-
1
-
2
Lightolier PPH2G12FW232 User manual
- Type
- User manual
- This manual is also suitable for
Lightolier PPH2G12FW232 is a direct/indirect 2' x 4' recessed fluorescent light fixture with a 12-cell white louver and lens overlay. It can accommodate two or three T8 lamps and has a variety of mounting options, including exposed T-bar, exposed slot T-grid, and acoustical material.
The fixture is designed for use in commercial applications and meets UL 1598, Paragraph 9.2.2.5 requirements for air return models. It has a 72.1% efficiency (2-lamp T8) or 67.8% efficiency (3-lamp T8) and is only 5" deep. The tension bars secure the ends to the body, and the fixture fits flush to the face of the slot grid (T) ceiling.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Lightolier PPH2G8FW2FT User manual
-
-
-
-
-
-
-
-
-
Other documents
-
Philips Lightolier SV5 User manual
-
-
-
-
Friedrich P12A User manual
-
-
-
-
Lithonia Lighting PT2U MV Installation guide
-
Cooper Lighting MSM User manual