Buffalo Tools HMDSBX is a drywall and thin-wood cutout tool designed for intricate and precise cuts with minimal material edge tearing. It features a powerful 120V, 60Hz motor that delivers 400 watts and 3.8 amps of power at 28,000 RPM, enabling efficient cutting performance. The tool comes with two collets (1/8-inch and 1/4-inch) for accommodating various cutting bit sizes.

With its adjustable depth gauge, you can set the cutting depth up to 1.5/16 inches, ensuring accurate and consistent cuts. The depth gauge bracket can be easily adjusted by loosening the stud screws, allowing you to customize the cutting depth according to your project requirements.