Dynex 6' USB-Parallel Printer Cable Quick setup guide

Brand: Dynex

Model: 6' USB-Parallel Printer Cable

Type: Quick setup guide

QUICK SETUP GUIDE

Installing the USB to parallel converter

Before attempting to print, make sure that the printer driver has

been installed on your computer! Please consult your printer or OS

documentation for assistance in installing your printer.

To install in your Mac OS system:

1 Plug the parallel plug of the cable into the parallel port on the

printer.

2 Plug the USB end of the cable into an available USB port on the

computer.

3 Turn on the printer and computer. Click on USB hardware on the left

column and look for the IEEE-1284 Controller device under the USB

Device Tree where Mac OS X installs printer drivers.

Package contents

• USB to parallel converter

• Quick Setup Guide

Features

• Connects a parallel printer to a USB port on a laptop or desktop

computer.

• Compatible with Windows, Mac, or Linux operating systems.

System requirements

• Windows® 8, Windows® 7, Windows Vista®, Windows® XP, or

Windows® 2000, Mac OS 9.x or above, or Linux.

• Printer driver for the brand/model of the parallel printer that is

compatible with your operating system (may need to be

downloaded from printer manufacturer’s website).

DX-UBPC

USB to Parallel Converter

4 To test print, open a document and click File --> Print. Select the

printer, and then click Print.

Before using your new product, please read these instructions to prevent any damage.

DX-UBPC_13-0084_QSG_V2_EN_final_CS5.ai 1 3/8/2013 11:27:53 AMDX-UBPC_13-0084_QSG_V2_EN_final_CS5.ai 1 3/8/2013 11:27:53 AM

To install in your Linux OS system:

1 Plug the parallel plug of the cable into the parallel port on the

printer.

2 Plug the USB end of the cable into an available USB port on the

computer.

3 To test print, open a document and click File > Print. Select the

printer, and then click Print.

For detailed instructions visit www.dynexproducts.com.

Troubleshooting

Visit www.dynexproducts.com for details.

To install in your Windows OS system:

1 Plug the parallel plug of the cable into the parallel port on the

printer. Turn on the printer and computer.

2 Plug the USB end of the cable into an available USB port on the

computer.

3 Windows will detect the attached printer. The printer name will

appear under Device Manager.

4 To test print, open a document and click File --> Print. Select the

printer, and then click Print.

Legal notices

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interfer-

ence will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment o and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Warning: Changes or modications not expressly approved by the

party responsible for compliance could void the user's authority to

operate the equipment.

Canadian Notice

IC notice - Clause 8, ICES-003 Issue 5:

"CAN ICES-3 B/NMB-3 B"

One-year limited warranty

For complete warranty, visit www.dynexproducts.com.

Contact Dynex

For customer service call 1-800-305-2204

www.dynexproducts.com

DYNEX is a registered trademark of BBY Solutions, Inc. Registered in some

countries.

Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richeld, MN

55423 U.S.A.

V2 ENGLISH 13-0084

DX-UBPC_13-0084_QSG_V2_EN_final_CS5.ai 2 3/8/2013 11:27:54 AMDX-UBPC_13-0084_QSG_V2_EN_final_CS5.ai 2 3/8/2013 11:27:54 AM

Dynex 6' USB-Parallel Printer Cable Quick setup guide

Dynex 6' USB-Parallel Printer Cable Quick setup guide

Dynex 6' USB-Parallel Printer Cable Quick setup guide

Related papers

Other documents