Mooney SBM20-261 Owner's manual

Type
Owner's manual
SERV ICE BUL LE TIN M20- 261
IS SUE DATE: 1 De cem ber, 1996
SUB JECT:BENDIX- KING SERV ICE BUL LE TIN No. SB KT 76A-7, JULY/96 (or later re vi sion(s)),
KT 76A ATC TRANS PONDER.
MOD ELS/S/N
AF FECTED: ALL MOD ELS OF MOO NEY AIR CRAFT MANU FAC TURED SINCE 1975 (IN CLUDES
M20C, M20E, M20F, M20J, M20K, M20L, M20M, AND M20R) AND ANY MODEL THAT MAY HAVE
HAD A KT 76A TRANS PONDER RET RO FIT TED SINCE 1975 (IN CLUDES M20, M20A,
M20B, M20D, M20G, OR M22) (AP PLIES TO ALL S/N’s)
TIME OF
COM PLI ANCE:RE FER TO BENDIX- KING SB KT 76A-7, DATED JULY/96 (or later re vi sion(s)
IN TRO DUC TION:
1.Bendix- King Serv ice Bul le tin No. KT 76A-7 pro vides in for ma tion that in di cates the in te g rated cir-
cuit (IC) of the KT 76A, P/N 066- 1062- 00/10/02, S/N’s from 93,000 to 109,000, may pos sess,
orprog ress to, an elec tronic break down within the IC that causes ei ther or both of the fol low in g
mal func tions:
1) The unit may in cor rectly in ter pret the out put of the en cod ing al time ter.
or 2) The unit may trans mit a code other than what is set (and shown) on the face of the
trans ponder unit.
2.The sub ject Bendix- King SB pro vides the com pli ance, ret ro fit, war ranty, and parts list in f or ma tion
nec es sary for the ret ro fit pro ce dures to be ac com plished by ap pro pri ately rated Bendix-
King Service Cen ters.
IN STRUC TIONS:RE FER TO BENDIX- KING SB KT 76A-7, DATED JULY/96 (or later re vi sion(s)
WAR RANTY: RE FER TO BENDIX- KING SB KT 76A-7, DATED JULY/96 (or later re vi sion(s)
REF ER ENCE
DATA:RE FER TO BENDIX- KING SB KT 76A-7, DATED JULY/96 (or later re vi sion(s)
PARTS LIST:
RE FER TO BENDIX- KING SB KT 76A-7, DATED JULY/96 (or later re vi sion(s)
FIG URES/
TA BLES:RE FER TO BENDIX- KING SB KT 76A-7, DATED JULY/96 (or later re vi sion(s)
THIS SERV ICE BUL LE TIN IS FAA AP PROVED FOR EN GI NEER ING DE SIGN
  • Page 1 1

Mooney SBM20-261 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI